Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

Bubuka

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

Émbaran Kasalametan

PERHATOSAN: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

• Pastikeun kakuatan dipegatkeun saméméh instalasi.
• Turutan sadaya kode listrik lokal sareng nasional.
• Alat ieu kanggo dianggo di jero rohangan wungkul.

Eusi pakét

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Intermatic SS7C Digital Wall Switch Timer Unit
• Pamasangan screws
• Kawat Kacangan
• Manual Pitunjuk (dokumén ieu)

Setup sareng Instalasi

Alat anu diperyogikeun: Screwdriver, Wire Strippers, Electrical Tape.

1. Pareuman Daya: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltage panguji.
2. Hapus saklar anu aya: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
   

   Gambar: Hareupeun view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

   • Line Wire: Connect to the timer's LINE terminal.
   • Kawat beban: Connect to the timer's LOAD terminal.
   • Kawat taneuh: Connect to the timer's GROUND terminal.
   • Neutral Wire (if applicable): Some installations may require a neutral wire. Consult your local electrical codes.
4. Pasang Timer: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
5. Mulangkeun Daya: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

Operasi sarta Programming

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. Nyetél Waktos sareng Dinten Ayeuna

1. Pencét éta JAM kancing. Pintonan waktos bakal hurung.
2. Ngagunakeun éta JAM jeung MENIT tombol pikeun nyaluyukeun waktos ayeuna.
3. Pencét éta POÉ tombol pikeun ngeset dinten ayeuna dina saminggu.
4. Pencét JAM again to save and exit, or wait a few seconds for it to save automatically.

2. Programming ON/OFF Events

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

1. Pencét éta PROG button. The display will show "1 ON".
2. Paké JAM, MENIT, jeung POÉ buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
3. Pencét PROG deui. Layarna bakal némbongkeun "1 OFF".
4. Set the desired OFF time and day(s) for Program 1 using the JAM, MENIT, jeung POÉ kancing.
5. Repeat steps 1-4 for additional programs (2 ON/OFF through 6 ON/OFF).
6. After setting all desired programs, press JAM pikeun balik deui ka operasi normal.

3. Manual Override

To manually turn the connected device ON or OFF outside of programmed times, press the ON/OFF button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

Pangropéa

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

• Ngagantian batré: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
• beberesih: Clean the timer's surface with a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur.

Pamérésan masalah

spésifikasi

• merek: Intermatik
• Jumlah modél: SS7C
• Beurat barang: 0.35 pon
• Jumlah Setélan: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
• Ukuran layar: 1.5 inci
• warna: Bodas
• Pabrikan: INTERMATIC INC
• UPC: 078275056732
• ASIN: B0000BYDA2

Garansi sareng Rojongan

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a 1-taun jaminan produsén kawates ti tanggal beuli. Garansi ieu nyertakeun cacad dina bahan sareng pagawean dina panggunaan normal.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic websitus atanapi tingal wincik kontak disadiakeun kalawan bungkusan produk Anjeun.