Broan-NuTone 66V Three-Function Wall Control

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your Broan-NuTone 66V Three-Function Wall Control. This wall control is designed to manage the functions of compatible Broan-NuTone fans and heaters, offering precise control over fan speed and heat levels. Please read these instructions carefully before installation and use to ensure safe and efficient operation.

The Broan-NuTone 66V is a 120V, 20 amp control featuring three independent rocker switches. It is compatible with Broan-NuTone fans and heaters within the specified amprating erage.

2. Émbaran Kasalametan

PERHATOSAN: Pikeun ngurangan résiko kahuruan, shock listrik, atawa tatu pikeun jalma, perhatikeun ieu di handap:

• Always disconnect power at the service panel before installing or servicing this control. Lock out the service panel to prevent power from being turned on accidentally.
• All electrical work must be performed by a qualified electrician in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
• Do not use this control with any device that exceeds its specified electrical ratings (120V, 20 amp).
• Produk ieu tiasa ngandung bahan kimia anu dipikanyaho ku Nagara California pikeun nyababkeun kanker sareng cacad kalahiran atanapi cilaka réproduktif sanés. Ngumbah leungeun sanggeus nanganan.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Broan-NuTone 66V Three-Function Wall Control (Ivory)

4. Setup jeung Instalasi

The Broan-NuTone 66V wall control is designed to fit a standard single-gang electrical opening. Ensure you have adequate space within the electrical box for wiring connections.

Gambar 1: Hareupeun view of the Broan-NuTone 66V Three-Function Wall Control. This image shows the three independent rocker switches and the ivory finish of the control panel.

1. Pegatkeun Daya: Before starting any electrical work, turn off the power to the circuit at the main service panel. Verify that power is off using a voltage panguji.
2. Nyiapkeun Wiring: Carefully remove the existing wall plate and switch, if applicable. Identify the wires for your fan and heater unit. The 66V control uses screw-type terminals for secure connections.
3. Sambungkeun kawat: Connect the appropriate wires from your electrical box to the corresponding terminals on the back of the 66V wall control. Ensure all connections are tight and secure. Refer to the wiring diagram provided with your fan/heater unit for specific connections.
4. Mount Control: Gently push the connected wires into the electrical box. It is recommended to use a deep electrical box to accommodate the wiring for three switches. Secure the wall control to the electrical box using the provided screws.
5. Pasang Plat Tembok: Attach the decorative wall plate over the installed control.
6. Mulangkeun Daya: Turn the power back on at the service panel.

5. Parentah Operasi

The Broan-NuTone 66V wall control features three independent rocker switches, each designed to control a specific function of your connected Broan-NuTone fan or heater unit.

• Operasi switch: Each rocker switch operates independently. Press the top of the rocker switch to turn the connected function ON, and press the bottom to turn it OFF.
• Function Assignment: The specific function controlled by each switch (e.g., fan, light, heater) depends on how the unit was wired during installation. It is recommended to label each switch for clarity.
• Kontrol anu tepat: Use the individual switches to select desired fan speeds or heat levels as supported by your connected Broan-NuTone appliance.

6. Pangropéa

The Broan-NuTone 66V wall control requires minimal maintenance.

• beberesih: To clean the surface of the wall control, wipe it with a soft, damp lawon. Ulah make cleaners abrasive, pangleyur, atawa bahan kimia kasar, sabab ieu bisa ngaruksak finish.
• Pamariksaan: Periodically inspect the wall control for any signs of damage or loose connections. If any issues are observed, disconnect power and consult a qualified electrician.

7. Cara ngungkulan

If you experience issues with your Broan-NuTone 66V wall control, consider the following:

• Henteu Kakuatan pikeun Alat: Ensure power is restored at the service panel. Check all wire connections at the wall control and the connected appliance for tightness.
• Saklar Teu Fungsi: Verify that the connected appliance is operational and not experiencing its own issues. Recheck wiring connections.
• Tight Fit in Electrical Box: If the control is difficult to install due to wire congestion, consider replacing the existing electrical box with a deeper one to provide more space for wiring.
• Masalah Persisten: If problems persist after checking these points, disconnect power and consult a qualified electrician or Broan-NuTone customer support.

8. Spésifikasi

9. Garansi jeung Rojongan

For information regarding product warranty, please refer to the warranty documentation included with your original purchase or visit the official Broan-NuTone website. For technical assistance, replacement parts, or further inquiries, please contact Broan-NuTone customer support through their official channels.