1. Produk Langkungview
The Leviton 1222-2W is a 20 Amp, 120/277 Volt, Toggle Double-Pole AC Quiet Switch designed for extra heavy-duty applications. This industrial-grade switch features a self-grounding design and supports both back and side wiring for flexible installation. It is built with high-quality materials to ensure durability and reliable performance.
Fitur konci:
- Industrial Quality: Constructed for demanding environments.
- Heavy Gauge Copper Alloy Arm: Ensures top performance and longevity.
- Large Silver Cadmium-Oxide Contacts: Designed for long life, preventing sticking, welding, and excessive pitting.
- Fully Enclosed Switch Mechanism: Housed in a rugged enclosure for strength, track, and arc resistance.
- Wire Lead Switches: Facilitates fast and easy installation.
Gambar 1: Hareupeun view of the Leviton 1222-2W Double-Pole AC Quiet Switch. Shows the white toggle and the metal mounting strap.
2. Émbaran Kasalametan
PERHATOSAN: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that the power is off before wiring! This device must be installed in accordance with all national and local electrical codes.
- Always disconnect power at the service panel before working on any electrical circuit.
- Anggo alat pelindung diri (APD) anu merenah sapertos kacamata kaamanan sareng sarung tangan anu diisolasi.
- Upami anjeun henteu yakin kana bagian mana waé tina pitunjuk ieu, konsultasi ka tukang listrik anu mumpuni.
- Do not use this switch with loads exceeding its specified ratings (20 Amps, 120/277 Volts AC).
- Produk ieu ngandung bahan kimia anu dipikanyaho ku Nagara California pikeun nyababkeun kanker sareng cacad kalahiran atanapi cilaka réproduktif anu sanés (Peringatan Proposisi 65). Ngumbah leungeun sanggeus nanganan.
3. Spésifikasi
| merek | Leviton |
| Nomer modél | 1222-2W |
| Pindah Tipe | Toggle, Double-Pole |
| Peunteun ayeuna | 20 Amps |
| Voltage Peunteun | 120/277 volt AC |
| Modeu Operasi | HIRUP |
| Jumlah Jabatan | 2 |
| Tipe Wiring | Balik jeung Sisi Kabel |
| Grounding | Self Grounding |
| Bahan | Metal (Mounting Strap), Silver Alloy (Contacts) |
| Warna | Bodas |
| Sertifikasi | CSA, FCC, RoHS, TUV, cUL |
4. Setup & Instalasi
Follow these steps carefully to install your Leviton 1222-2W Double-Pole AC Quiet Switch. Ensure all safety precautions are observed.
Alat anu diperyogikeun:
- Obeng (Phillips sareng Flathead)
- Kawat Strippers / Cutters
- Voltage Panguji
- Pita listrik (opsional)
Léngkah-léngkah pamasangan:
- Pareuman Daya: Locate the circuit breaker or fuse that controls the power to the switch location. Turn it OFF. Use a voltage tester to confirm that the power is completely off at the switch box.
- Cabut Saklar Lawas (upami aya): Carefully remove the wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch, noting their positions.
- Siapkeun Kawat: If necessary, strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. Ensure wire ends are clean and straight.
- Identipikasi Terminal: The Leviton 1222-2W switch has four terminals for line and load connections, plus a green grounding screw. For a double-pole switch, there will be two 'LINE' terminals (for incoming power) and two 'LOAD' terminals (for outgoing power to the device). The switch is marked 'LINE' and 'LOAD' on the back.
- Nyambungkeun Kawat Ground: Sambungkeun tambaga bulistir atawa kawat taneuh insulated héjo tina kotak listrik ka screw grounding héjo on switch. Ketang aman.
- Connect Line Wires: Connect the two incoming hot (usually black) wires from the power source to the two 'LINE' terminals on the switch. You can use either the side screw terminals or the back-wire holes. Tighten screws firmly if using side terminals.
- Sambungkeun Kawat Beban: Connect the two outgoing hot (usually black) wires leading to the fixture or appliance to the two 'LOAD' terminals on the switch. Tighten screws firmly.
- Pasang saklar: Carefully fold the wires into the electrical box, leaving enough room for the switch. Secure the switch to the electrical box using the provided mounting screws.
- Pasang Plat Tembok: Attach the wall plate over the switch.
- Mulangkeun Daya: Turn the power back ON at the circuit breaker or fuse box. Test the switch to ensure proper operation.
Gambar 2: Balik view of the switch, indicating 'LINE' and 'LOAD' terminals for wiring connections. Note the green grounding screw at the bottom.
Gambar 3: Sisi profile of the switch, showing the depth and the toggle in the 'ON' position. This view highlights konstruksi mantap.
5. Operasi
The Leviton 1222-2W is a simple ON-OFF toggle switch. To operate:
- Pikeun ON: Push the toggle lever to the 'ON' position (typically upwards).
- Pikeun mareuman: Push the toggle lever to the 'OFF' position (typically downwards).
Gambar 4: Sisi profile of the switch, showing the depth and the toggle in the 'OFF' position. This view highlights konstruksi mantap.
6. Pangropéa
The Leviton 1222-2W switch is designed for long-term, maintenance-free operation under normal conditions. However, periodic checks can help ensure continued safety and performance:
- beberesih: To clean the switch and wall plate, wipe with a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur. Pastikeun kakuatan pareum sateuacan beberesih.
- Pamariksaan: Periodically inspect the switch and wall plate for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power and replace the switch.
- Keketatan: If the switch feels loose in the wall box, turn off power and gently tighten the mounting screws. Do not overtighten.
7. Cara ngungkulan
If you experience issues with your Leviton 1222-2W switch, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Switch does not turn ON/OFF power. | No power to the circuit; Loose wiring connection; Faulty switch. | Check circuit breaker/fuse. Turn off power, check all wire connections for tightness. If connections are secure, replace the switch. |
| Switch feels warm to the touch. | Overload on the circuit; Loose wiring connection; Internal fault. | Immediately turn off power. Reduce load on the circuit. Check wiring connections for tightness. If problem persists, replace the switch. |
| Toggle is stiff or difficult to move. | Dust or debris; Internal mechanism issue. | Turn off power and gently clean around the toggle. If stiffness continues, replace the switch. |
If troubleshooting steps do not resolve the issue, contact Leviton customer support or a qualified electrician.
8. Jaminan & Dukungan
Inpormasi Garansi:
This Leviton 1222-2W Double-Pole AC Quiet Switch is covered by a 10-Taun jaminan kawates. This warranty covers defects in materials and workmanship under normal use and service. For full warranty details, please refer to the official Leviton warranty statement or contact customer support.
Rojongan Palanggan:
Pikeun bantuan teknis, inquiries produk, atawa klaim jaminan, mangga ngahubungan rojongan customer Leviton ngaliwatan resmi maranéhanana website or the contact information provided with your purchase. When contacting support, please have your product model number (1222-2W) and purchase date available.