Bubuka
This manual provides comprehensive instructions for the installation, configuration, and operation of your D-Link Wireless N300 DSL Modem Router, model DSL-2740B. This device integrates an ADSL2+ modem, a wireless N router, and a 4-port Ethernet switch, offering a complete solution for high-speed internet access and network sharing.
Please read this manual thoroughly before setting up your device to ensure proper functionality and optimal performance.
Disetél
1. Eusi Paket
Pariksa yén pakét anjeun ngandung barang-barang ieu:
- D-Link Wireless N300 DSL Modem Router (DSL-2740B)
- Adaptor kakuatan
- Kabel Ethernet (RJ-45)
- Kabel Telepon (RJ-11)
- ADSL Splitter/Filter (may vary by region)
- Guide Instalasi Gancang
If any items are missing or damaged, please contact your local D-Link reseller.
2. Sambungan fisik
Follow these steps to connect your modem router:
- Pareum listrik: Ensure your computer and any existing modem are powered off.
- DSL Line Connection: Connect one end of the phone cable (RJ-11) to the DSL port on the back of the DSL-2740B. Connect the other end to your ADSL wall jack or the 'MODEM' port on an ADSL splitter/filter.
- Sambungan Ethernet: Connect one end of the Ethernet cable (RJ-45) to any of the LAN ports (1-4) on the back of the DSL-2740B. Connect the other end to the Ethernet port on your computer.
- Sambungan Daya: Connect the power adapter to the power input on the back of the DSL-2740B and then plug it into a power outlet.
- Daya Hurung: Press the power button on the back of the device. The Power LED on the front panel should illuminate.

Gambar 1: Hareupeun view of the D-Link Wireless N300 DSL Modem Router DSL-2740B. This image displays the front of the D-Link DSL-2740B modem router, highlighting its status LEDs and two external antennas. The LEDs indicate power, DSL connection status, Internet activity, and LAN port activity.
3. Konfigurasi Awal (Web Panganteur)
To access the modem router's webutilitas konfigurasi dumasar:
- Buka a web browser (contona, Chrome, Firefox, Edge).
- Dina bar alamat, ngetik http://192.168.1.1 terus pencét Lebetkeun.
- A login prompt will appear. Enter the default username and password (usually admin for both, or refer to the label on the device).
- Follow the on-screen setup wizard to configure your DSL connection settings (VPI/VCI, encapsulation type, username, password provided by your ISP) and wireless network settings (SSID, security key).
Parentah Operasi
1. Alat Sambungkeun
- Alat kabel: Connect Ethernet-enabled devices (e.g., desktop computers, gaming consoles) to any of the four LAN ports on the back of the router using Ethernet cables.
- Alat nirkabel:
- Dina alat nirkabel anjeun (laptop, smartphone, tablet), milarian jaringan Wi-Fi anu sayogi.
- Select the SSID (network name) you configured during the initial setup.
- Lebetkeun kecap akses nirkabel (konci kaamanan) nalika dipenta.
- The device should now be connected to your wireless network.
2. Konfigurasi Jaringan Nirkabel
You can modify your wireless network settings through the web panganteur:
- SSID (Ngaran Jaringan): Change the default network name to a unique identifier.
- Modeu Kaamanan: It is recommended to use WPA2-PSK (AES) for the strongest security.
- Pre-Shared Key (Password): Set a strong, unique password for your wireless network.
- WPS (Wi-Fi Protected Setup): Use WPS for easy connection of compatible devices by pressing the WPS button on the router or entering a PIN.
Pangropéa
1. Apdet firmware
Periodically check the D-Link support website for firmware updates. Firmware updates can improve performance, add new features, and fix security vulnerabilities. Follow the instructions provided with the firmware update file taliti.
2. Ngareset Alat
If you encounter persistent issues or forget your login credentials, you may need to reset the device to factory default settings. Locate the reset button (usually a small pinhole) on the back of the router. With the device powered on, use a paperclip to press and hold the reset button for approximately 10 seconds until the LEDs flash. The device will restart with factory default settings.
3. beberesih
Keep the modem router clean and free from dust. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
Pamérésan masalah
Masalah umum sareng Solusi:
- Henteu aya kakuatan: Ensure the power adapter is securely connected to the device and a working power outlet. Check the Power LED.
- Teu aya sambungan DSL: Verify the phone cable is correctly connected to the DSL port and the wall jack/splitter. Ensure your ISP service is active. The DSL LED should be solid green.
- Henteu aya aksés Internét: Check if the Internet LED is illuminated. If not, verify your ISP settings (username, password, VPI/VCI) in the web antarmuka. Hubungi ISP anjeun upami masalahna terus-terusan.
- Teu Aya Sambungan Nirkabel: Ensure the Wireless LED is illuminated. Check your device's Wi-Fi settings and ensure you are connecting to the correct SSID with the correct password.
- Performance Lambat:
- Try restarting the modem router by unplugging it for 10 seconds and plugging it back in.
- Pastikeun router disimpen dina lokasi sentral, jauh ti halangan jeung sumber gangguan (misalna gelombang mikro, telepon tanpa kabel).
- Pariksa apdet firmware.
Indikator LED:
| Ngaran LED | Status | Katerangan |
|---|---|---|
| Kakuatan | Héjo padet | Alat dihurungkeun. |
| DSL | Héjo padet | DSL connection is established. |
| DSL | Kedip-kedip Héjo | Attempting to establish DSL connection. |
| Internét | Héjo padet | Sambungan internét keur aktip. |
| Internét | Kedip-kedip Héjo | Data is being transmitted/received over the Internet. |
| LAN (1-4) | Héjo padet | A device is connected to the corresponding LAN port. |
| LAN (1-4) | Kedip-kedip Héjo | Data is being transmitted/received over the corresponding LAN port. |
| WLAN | Héjo padet | Wireless network is active. |
| WLAN | Kedip-kedip Héjo | Data is being transmitted/received over the wireless network. |
spésifikasi
- model: DSL-2740B
- Jenis alat: ADSL2+ Modem, Wireless N Router, 4-Port Switch
- Standar nirkabel: 802.11n (backward compatible with 802.11g/b)
- Laju nirkabel: Up to 300 Mbps (N300)
- ADSL Standard: ADSL2+
- Port Ethernet: 4 x 10/100 Mbps LAN ports (RJ-45)
- Palabuhan DSL: 1 x RJ-11
- Kaamanan: WPA, WPA2 Wireless Encryption, NAT and SPI Dual Active Firewall
- Ukuran (L x W x H): Kira-kira 10.9 x 8.3 x 2.7 inci
- beurat: Kurang leuwih 1.4 pon
- Sistem operasi: D-Link OS
- Fitur husus: WPS
Émbaran jaminan
D-Link products are covered by a limited warranty. The specific terms and duration of the warranty may vary by region and product. Please refer to the warranty card included with your product or visit the official D-Link websitus kanggo inpormasi garansi lengkep anu lumaku pikeun pameseran anjeun.
Bantosan Téknis
For technical assistance, product registration, or to download the latest drivers and firmware, please visit the official D-Link support website. Support resources typically include FAQs, troubleshooting guides, and contact information for technical support representatives.
D-Link Rojongan Websitus: www.dlink.com/support