PHONOCAR 04130

Phonocar 04130 Hi-Fi System Interface for Audi

Manual pamaké

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your Phonocar 04130 Hi-Fi System Interface. This adapter cable is designed to integrate an aftermarket car stereo with original Audi Hi-Fi systems, specifically those equipped with a Bose amppangagung.

Please read this manual thoroughly before installation to ensure correct usage and to prevent damage to the product or your vehicle's audio system.

Phonocar 04130 Hi-Fi System Interface

Figure 1: Phonocar 04130 Hi-Fi System Interface. This image shows the adapter cable with its various connectors, designed to bridge an aftermarket car stereo with an Audi Bose ampSistim liifier.

2. Kasaluyuan

The Phonocar 04130 interface is compatible with the following Audi models equipped with an original Bose sound system:

  • Audi A2 (2001-2007)
  • Audi A3 (3-door) (1996-2007)
  • Audi A3 (2001-2006)
  • Audi A4/Avant (2001-2006)
  • Audi A5 (5-door) (2005-2007)
  • Audi TT (2000-2006)

This adapter is specifically designed for vehicles with an amplified rear and front Bose system, utilizing an amplified car radio output.

3. Émbaran Kasalametan

  • Always disconnect the vehicle's battery before beginning any electrical installation to prevent short circuits and electrical shock.
  • Ensure all connections are secure and properly insulated to avoid electrical hazards and signal interference.
  • Upami anjeun teu yakin kana bagian mana waé tina prosés pamasangan, konsultasi ka teknisi audio mobil anu mumpuni.
  • Do not modify the adapter cable. Unauthorized modifications can void the warranty and lead to malfunction or damage.
  • Jauhkeun produk tina Uap sareng suhu anu ekstrim.

4. Setup jeung Instalasi

This adapter cable facilitates the connection of an aftermarket car stereo to your Audi's original Bose amplified sound system. The adapter uses the amplified output from your new car stereo.

Léngkah-léngkah pamasangan:

  1. Pegatkeun sambungan batré: Sateuacan ngamimitian, pegatkeun terminal négatif batré kandaraan anjeun.
  2. Remove Original Stereo: Carefully remove your vehicle's original car stereo unit. Refer to your vehicle's service manual for specific instructions on removing the head unit.
  3. Identipikasi sambungan: Locate the original wiring harness connected to the factory stereo. Identify the power, ground, speaker, and amplifier control wires.
  4. Connect Adapter to Aftermarket Stereo: Connect the appropriate end of the Phonocar 04130 adapter cable to the wiring harness of your new aftermarket car stereo. Ensure that the speaker outputs from your new stereo are connected to the input side of the Phonocar adapter.
  5. Connect Adapter to Vehicle Harness: Connect the other end of the Phonocar 04130 adapter to the vehicle's original wiring harness that previously connected to the factory stereo. This adapter will route the amplified signal from your new stereo to the Bose amppangagung.
  6. Sambungan Aman: Double-check all connections to ensure they are firm and correctly matched. Use electrical tape or heat shrink tubing to insulate any exposed wires.
  7. Sistem tés: Before fully reassembling the dashboard, reconnect the vehicle's battery. Turn on the aftermarket stereo and test all audio functions, including front and rear speakers, balance, and fade.
  8. Pasang deui Dashboard: Once confirmed that the system is working correctly, carefully reassemble the dashboard and secure the new car stereo in place.

Catetan: This adapter is designed to work with car stereos that have an amplified output. It converts these signals for proper integration with the Audi Bose system.

5. Parentah Operasi

Once the Phonocar 04130 interface is correctly installed, the operation of your car's audio system will primarily be controlled by your new aftermarket car stereo. The interface acts as a bridge, allowing the aftermarket stereo's audio output to be processed by the vehicle's original Bose amppangagung.

  • Hurungkeun/Pareuman: The Bose amplifier will power on and off automatically with your aftermarket stereo.
  • Kontrol volume: Adjust the volume directly from your aftermarket stereo.
  • Setélan Audio: Use the audio settings (bass, treble, balance, fade) on your aftermarket stereo. The Bose amplifier will process these signals.
  • Pilihan Sumber: Select your desired audio source (radio, CD, USB, Bluetooth, etc.) directly from your aftermarket stereo.

No additional controls or adjustments are typically required for the Phonocar 04130 interface itself after installation.

6. Pangropéa

The Phonocar 04130 Hi-Fi System Interface is designed for long-term, maintenance-free operation once installed correctly. No regular user maintenance is required.

  • beberesih: If the adapter needs cleaning before installation, use a dry, soft cloth. Do not use liquid cleaners or solvents.
  • Pamariksaan: Periodically, if you experience audio issues, you may want to inspect the connections to ensure they remain secure and free from corrosion. This typically requires partial removal of the car stereo.
  • Kaayaan Lingkungan: Ensure the adapter is installed in a dry environment, protected from direct sunlight and extreme temperatures, which are typically found behind the dashboard.

7. Cara ngungkulan

If you encounter issues after installing the Phonocar 04130 interface, refer to the following troubleshooting guide:

MasalahMungkin Cukang lantarananaSolusi
Teu aya kaluaran audio tina speaker.
  • Sambungan kabel anu salah.
  • Bose amplifier not receiving power or turn-on signal.
  • Aftermarket stereo not providing ampkaluaran liified.
  • Blown fuse in vehicle or stereo.
  • Recheck all wiring connections, especially power, ground, and speaker wires.
  • Ensure the remote turn-on wire from the aftermarket stereo is connected to the amplifier turn-on wire (if applicable).
  • Verify your aftermarket stereo has ampoutputs spiker liified.
  • Check fuses for the stereo and the vehicle's audio system.
Distorted or low-quality audio.
  • Improper gain settings on aftermarket stereo.
  • Sambungan leupas atawa corroded.
  • Gangguan puteran taneuh.
  • Adjust the volume and gain settings on your aftermarket stereo.
  • Pariksa sareng amankeun sadaya sambungan kabel.
  • Ensure proper grounding for both the stereo and the adapter.
Only front or rear speakers working.
  • Incorrect speaker wiring.
  • Fader settings on aftermarket stereo.
  • Verify that all front and rear speaker wires are correctly connected to the adapter.
  • Check the fader settings on your aftermarket stereo.

If these steps do not resolve the issue, it is recommended to consult a professional car audio installer.

8. Spésifikasi

  • merek: PHONOCAR
  • model: 04130
  • Alat anu cocog: Original Audi Hi-Fi Systems
  • Supported Software/System: Original Bose System
  • Téknologi konektipitas: Analog
  • Jumlah Saluran: 2
  • fungsi: Adapter cable for front and rear Bose amplified systems with amplified car radio output.

9. Garansi jeung Rojongan

Phonocar products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase or visit the official Phonocar websitus pikeun istilah jeung kaayaan jaminan lengkep.

For technical support, installation assistance, or warranty claims, please contact your authorized Phonocar dealer or visit the Phonocar official websitus pikeun inpo kontak.

Websitus: www.phonocar.it

© 2023 PHONOCAR. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.