D-Link GO-SW-5G 5-Port Gigabit Desktop Switch User Manual

1. Bubuka

The D-Link GO-SW-5G is a 5-Port Unmanaged Gigabit Desktop Switch designed for home and small office environments. This device provides a simple and cost-effective solution to expand your network connectivity, offering high-speed Gigabit Ethernet ports for reliable data transfer. It incorporates D-Link's Green Technology for energy efficiency, reduced heat generation, and extended product lifespan.

This switch is a plug-and-play device, requiring no complex configuration or software installation, making it easy to integrate into an existing network.

2. Eusi Paket

Punten parios yén sadaya barang anu didaptarkeun di handap kalebet kana pakét anjeun:

• D-Link GO-SW-5G 5-Port Gigabit Desktop Switch
• Adaptor kakuatan
• Gancang Install Guide

Lamun aya item nu leungit atawa ruksak, mangga ngahubungan pangecér Anjeun pikeun pitulung.

3. Parentah Setup

The D-Link GO-SW-5G switch is designed for easy plug-and-play installation. Follow these steps to set up your device:

3.1. Sambungkeun adaptor kakuatan

1. Locate the power input port on the side of the D-Link GO-SW-5G switch.
2. Sambungkeun adaptor daya anu disayogikeun ka port ieu.
3. Colokkeun tungtung adaptor daya anu sanésna kana stop kontak listrik standar.
4. The power LED on the front of the switch will illuminate, indicating that the device is receiving power.

Gambar 1: Samping view of the D-Link GO-SW-5G switch with the power input port.

3.2. Nyambung ka Jaringan Anjeun

5. Using a standard Ethernet cable (RJ45), connect one end to an available LAN port on your router (not your modem).
6. Connect the other end of this Ethernet cable to any of the five available ports on the back of the D-Link GO-SW-5G switch.
7. The corresponding LED on the front of the switch will light up, indicating an active connection.

Gambar 2: Tukangeun view of the D-Link GO-SW-5G switch with five Ethernet ports.

3.3. Connect Network Devices

8. Connect your network devices (e.g., computers, gaming consoles, network printers, smart TVs) to the remaining available Ethernet ports on the D-Link GO-SW-5G switch using Ethernet cables.
9. Each connected device will have its corresponding LED on the front of the switch illuminate, confirming a successful connection.

Gambar 3: Hareupeun view of the D-Link GO-SW-5G switch showing active port LEDs.

4. Parentah Operasi

The D-Link GO-SW-5G is an unmanaged switch, meaning it operates automatically without requiring user configuration. Once connected as described in the Setup section, it will begin forwarding network traffic between connected devices.

• Negosiasi Otomatis: The switch automatically detects the network speed (10/100/1000 Mbps) and duplex mode (half/full) of connected devices and adjusts accordingly.
• MDI/MDIX Otomatis: All ports support automatic MDI/MDIX crossover, eliminating the need for crossover cables when connecting to other switches or hubs.
• Indikator LED: Each port has an LED indicator on the front panel. A lit LED indicates an active link, and blinking indicates network activity.

5. Pangropéa

To ensure optimal performance and longevity of your D-Link GO-SW-5G switch, consider the following maintenance guidelines:

• panempatan: Place the switch in a cool, dry location away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the device.
• beberesih: Use a soft, dry cloth to clean the exterior of the switch. Avoid using liquid or aerosol cleaners, as they may damage the device.
• Manajemén Kabel: Keep Ethernet cables neatly organized to prevent tangles and accidental disconnections.
• Siklus kakuatan: If you experience network issues, a simple power cycle (unplugging the power adapter for 10 seconds and then plugging it back in) can often resolve minor problems.

6. Cara ngungkulan

If you encounter issues with your D-Link GO-SW-5G switch, refer to the following common troubleshooting steps:

• LED Tanpa Daya:
  • Pastikeun adaptor daya disambungkeun pageuh kana saklar sareng stop kontak listrik anu tiasa dianggo.
  • Pariksa stop kontak listrikna tiasa dianggo ku cara nyolokkeun alat anu sanés.
• No Link/Activity LED for a Connected Device:
  • Pariksa yén kabel Ethernet parantos dipasang kalayan pageuh kana port switch sareng alat jaringan.
  • Coba kabel Ethernet béda pikeun ngaluarkeun kabel faulty.
  • Pastikeun alat anu nyambung hurung sareng adaptor jaringanna jalan kalayan leres.
  • Coba sambungkeun alat ka port béda dina saklar.
• Lambat Jaringan:
  • Verify that all connected devices and cables support Gigabit Ethernet (1000 Mbps) for optimal performance. The switch will operate at the lowest common speed.
  • Ensure your router and internet service provider (ISP) plan support the desired speeds.
  • Perform a power cycle on the switch and your router.
• Konektipitas Intermittent:
  • Pariksa sambungan kabel leupas.
  • Ensure the switch is not overheating; provide adequate ventilation.
  • Test kalawan kabel Ethernet béda.

7. Spésifikasi

8. Garansi jeung Rojongan

Garansi kawates: The D-Link GO-SW-5G switch comes with a 3-year limited warranty. For detailed terms and conditions, please refer to the warranty information included in your package or visit the official D-Link websitus.

Bantosan Téknis: For technical assistance, product registration, or to download the latest firmware and documentation, please visit the D-Link Rojongan Websitus or contact D-Link customer service.