D-Link GO-SW-8G

D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch

Manual pamaké

Bubuka

The D-Link GO-SW-8G is an 8-port unmanaged Gigabit desktop switch designed for small office and home office (SOHO) environments. This device facilitates network expansion by providing eight 10/100/1000 Mbps Ethernet ports, enabling high-speed data transfer for connected devices. It incorporates D-Link's Green Technology for energy efficiency, reduced heat generation, and extended product lifespan.

Disetél

Eusi pakét

Pariksa yén pakét anjeun ngandung barang-barang ieu:

  • GO-SW-8G device
  • Adaptor kakuatan

Nyambungkeun Switch

The GO-SW-8G is a plug-and-play device, requiring no software configuration for basic operation. Follow these steps to set up your switch:

  1. Sambungan Daya: Connect the provided power adapter to the power input port on the rear panel of the GO-SW-8G switch and then plug the adapter into a standard electrical outlet.
  2. Sambungan Alat Jaringan: Connect Ethernet cables from your network devices (e.g., computers, network-attached storage, routers) to any of the eight available RJ45 ports on the GO-SW-8G switch. The switch supports auto MDI/MDIX, so you can use either straight-through or crossover Ethernet cables.
  3. Verifikasi: Once connected, the corresponding LED indicator for each active port will illuminate, indicating a successful link.
D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch

Image: D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch. This image displays the compact white design of the switch with its multiple Ethernet ports and power input.

Ngoperasikeun

The D-Link GO-SW-8G operates as an unmanaged switch, meaning it requires no user configuration for its core functions. It automatically detects network speed and duplex mode for each connected device, providing optimal performance. The Gigabit Ethernet ports support data transfer rates of up to 1000 Mbps, facilitating fast communication within your local network.

Indikator LED

The switch features LED indicators for each port and for power. These indicators provide visual feedback on the status of the switch and its connections:

  • LED kakuatan: Caang nalika saklar diaktipkeun.
  • Link/Aktivitas LEDs (per port):
    • Héjo padet: Indicates a successful network link at Gigabit speed (1000 Mbps).
    • Amber padet: Indicates a successful network link at Fast Ethernet speed (10/100 Mbps).
    • Kedip-kedip: Indicates network activity (data transmission or reception) on that port.
    • Pareum: No link detected or device is not powered on/connected.

Pangropéa

To ensure optimal performance and longevity of your D-Link GO-SW-8G switch, follow these general maintenance guidelines:

  • panempatan: Place the switch in a well-ventilated area to prevent overheating. Avoid direct sunlight and heat sources.
  • beberesih: Anggo lawon anu lembut sareng garing pikeun ngabersihan bagian luar saklar. Entong nganggo pembersih cair atanapi aerosol.
  • Manajemén Kabel: Pastikeun kabel jaringan disusun rapih sareng henteu bengkok atanapi tegang teuing.
  • Sasayogian tanaga: Paké ngan adaptor kakuatan disadiakeun kalawan alat.

Pamérésan masalah

If you encounter issues with your D-Link GO-SW-8G switch, refer to the following common troubleshooting steps:

  • Henteu aya kakuatan:
    • Pastikeun adaptor kakuatan disambungkeun sacara aman ka saklar sareng stop kontak listrik anu tiasa dianggo.
    • Pariksa naha stop kontak listrik berpungsi ku cara nyolokkeun alat sejen.
  • Henteu aya Link Lampu:
    • Verify that the Ethernet cable is securely plugged into both the switch port and the network device.
    • Pastikeun alat jaringan anu nyambung hurung sareng tiasa dianggo kalayan leres.
    • Cobi kabel Ethernet anu béda pikeun nyingkahan kagagalan kabel.
    • Uji nganggo port anu béda dina switch.
  • Lambat Jaringan:
    • Confirm that all connected devices and cables support Gigabit Ethernet (1000 Mbps) for optimal performance.
    • Check for excessive network traffic or bandwidth-intensive applications running on connected devices.
    • Ensure the switch is placed in an area with adequate ventilation to prevent performance degradation due to overheating.

spésifikasi

merekD-Tumbu
Nomer modélGO-SW-8G/B
Jumlah Palabuhan8
Laju Mindahkeun Data1000 Megabytes Per Second (Gigabit)
Pindah TipeTeu kaurus
PanganteurRJ45
Alat nu cocogPC, Mac
Voltage5 volt
Case Material Typepalastik
Item Beurat0.3 pon

Émbaran jaminan

The D-Link GO-SW-8G switch comes with a 3-taun jaminan kawates. For detailed terms and conditions, please refer to the warranty card included with your product or visit the official D-Link websitus.

Ngarojong

For technical support, product registration, or to download the latest firmware and documentation, please visit the official D-Link support website. You can typically find support resources by searching for your product model (GO-SW-8G) on their site.

D-Link Official Websitus: www.dlink.com

© 2023 D-Link Corporation. Sadaya hak disimpen.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.