1. Bubuka
This manual provides instructions for the installation, configuration, and operation of the D-Link DGS-1210-28P Web Smart 24-Port Gigabit PoE Switch. This device is designed to provide a high-performance, cost-effective solution for small to medium-sized businesses, offering advanced management features and Power over Ethernet (PoE) capabilities.
2. Émbaran Kasalametan
- Mastikeun ventilasi ditangtoskeun sabudeureun switch pikeun nyegah overheating.
- Do not place the switch in areas with high humidity or extreme temperatures.
- Paké ngan adaptor kakuatan disadiakeun kalawan alat.
- Pegatkeun sambungan kakuatan saméméh meresihan atawa ngalakukeun pangropéa.
- This device should be installed by qualified personnel in accordance with all local and national electrical codes.
3. Eusi Paket
Pariksa yén pakét anjeun ngandung barang-barang ieu:
- DGS-1210-28P Web Smart 24-Port Gigabit PoE Switch
- Kabel listrik
- Pakakas Pasang Rak (braket sareng sekrup)
- Suku Karét (pikeun pamasangan desktop)
- Kabel Konsol (RJ-45 ka DB-9)
- Guide Instalasi Gancang
- CD-ROM (containing product documentation)
If any items are missing or damaged, please contact your local D-Link reseller for assistance.
4. Physical Description and Hardware Overview
The DGS-1210-28P switch features 24 Gigabit Ethernet ports with PoE support and 4 SFP slots for fiber optic connections. Below are diagrams illustrating the front and rear panels of the device.
Gambar 4.1: Panel hareup View
This image displays the front panel of the DGS-1210-28P switch, showing 24 RJ-45 Gigabit Ethernet ports, each with LED indicators for link/activity and PoE status. To the right, there are 4 SFP (Small Form-Factor Pluggable) slots for fiber optic transceivers. The D-Link logo and model number are visible on the left side of the panel.
Gambar 4.2: Panel Rear View
This image shows the rear panel of the DGS-1210-28P switch. The primary feature visible is the AC power input connector on the right side, labeled "AC LINE" with voltage and current specifications (100-240VAC, 50/60Hz, 0.5 A MAX). The D-Link brand name is embossed on the top surface of the switch casing.
4.1 Indikator Panel hareup
- LED kakuatan: Nunjukkeun status kakuatan switch.
- Sistim LED: Nunjukkeun status sistem.
- Link / Act LEDs (per port): Green for Gigabit link/activity, Amber for 10/100 Mbps link/activity.
- LED Status PoE (per port PoE): Nunjukkeun status pangiriman kakuatan PoE.
4.2 Panyambung Panel pungkur
- Input Daya AC: Nyambungkeun kana kabel listrik anu disayogikeun.
5. Setélan
5.1 Instalasi Desktop
- Attach the included rubber feet to the bottom of the switch.
- Place the switch on a flat, stable surface with adequate ventilation.
5.2 Pamasangan rak
- Attach the two rack-mounting brackets to the side grooves of the switch using the provided screws.
- Pasangkeun saklar kana rak peralatan standar 19 inci nganggo sekrup rak anu pas (teu kalebet).
5.3 Nyambungkeun Saklar
- Connect your network devices (computers, servers, access points, IP cameras) to the RJ-45 ports on the front panel using standard Ethernet cables.
- For fiber optic connections, insert compatible SFP transceivers into the SFP slots and connect fiber optic cables.
- Connect the power cord to the AC power input on the rear panel of the switch and then to a suitable power outlet.
- Verify that the Power LED on the front panel illuminates.
6. Ngoperasikeun Switch
6.1 Initial Access to Web-based Manajemén
The DGS-1210-28P is a Web Smart switch, meaning it can be configured and managed via a web browser.
- Ensure your computer is connected to one of the switch's Ethernet ports.
- By default, the switch has a pre-configured IP address (e.g., 192.168.0.1). Refer to the Quick Installation Guide or product documentation for the exact default IP address.
- Configure your computer's IP address to be in the same subnet as the switch (e.g., if the switch is 192.168.0.1, set your computer to 192.168.0.10 with subnet mask 255.255.255.0).
- Buka a web browser (e.g., Chrome, Firefox, Edge) and enter the switch's default IP address in the address bar.
- You will be prompted for a username and password. The default credentials are typically "admin" for both username and password. Refer to the documentation for specific defaults.
- Upon successful login, you will access the switch's web management interface, where you can configure various network settings, VLANs, QoS, PoE settings, and more.
penting: For security reasons, it is highly recommended to change the default password immediately after initial login.
6.2 Kakuatan leuwih Ethernet (Poe) Fungsionalitas
The DGS-1210-28P supports PoE, allowing it to deliver power to compatible devices (e.g., IP phones, wireless access points, IP cameras) over the Ethernet cable. This eliminates the need for separate power outlets for these devices.
- Connect PoE-compatible devices to any of the 24 Gigabit Ethernet ports.
- The switch will automatically detect and provide power to compliant devices.
- Monitor PoE status via the port LEDs or the web panganteur manajemén.
- The total power budget for the switch is 193 Watts. Ensure the total power consumption of connected PoE devices does not exceed this limit.
7. Pangropéa
- beberesih: Anggo lawon anu lembut sareng garing pikeun ngabersihan bagian luar saklar. Entong nganggo pembersih cair atanapi aerosol.
- Pembaruan firmware: Periodically check the D-Link support website for firmware updates to ensure optimal performance and security. Follow the instructions provided with the firmware update package.
- Ventilasi: Ensure that the ventilation openings on the switch are not blocked to prevent overheating.
- Konfigurasi Nyadangkeun: Regularly back up your switch configuration settings through the web management interface to facilitate quick recovery in case of a reset or failure.
8. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Henteu aya indikasi LED Daya | Kabel listrik teu nyambung atanapi masalah stop kontak. | Verify power cord connection to the switch and power outlet. Test the outlet with another device. |
| No Link/Act LED on a connected port | Faulty cable, incorrect cable type, or device not powered on. | Check the Ethernet cable for damage. Ensure the connected device is powered on and functioning correctly. Try a different port or cable. |
| Teu bisa ngakses web panganteur manajemén | Incorrect IP address, subnet mismatch, or browser issue. | Verify the switch's IP address and your computer's IP settings. Ensure they are in the same subnet. Clear browser cache or try a different browser. Reset the switch to factory defaults if necessary (refer to documentation for procedure). |
| Alat PoE teu narima daya | Device not PoE compliant, cable issue, or power budget exceeded. | Ensure the device is PoE compliant. Check the Ethernet cable. Verify the total PoE power consumption in the web interface and ensure it does not exceed 193 Watts. |
9. Spésifikasi
| Modél | DGS-1210-28P |
| Palabuhan | 24 x 10/100/1000BASE-T PoE Ports, 4 x Gigabit SFP Ports |
| Standar Poe | IEEE 802.3af / di |
| Total Anggaran Daya PoE | 193 Watt |
| Ngalihkeun Kamampuh | 56 Gbps |
| Neraskeun Laju | 41.67 Mpps |
| Ukuran méja Alamat MAC | Éntri 16K |
| Pigura Jumbo | 10,000 bait |
| Ukuran (W x D x H) | 440 x 210 x 44 mm (17.32 x 8.27 x 1.73 inci) |
| Beurat | 3.63 kg (8 lbs) |
| Input kakuatan | 100-240 VAC, 50/60 Hz Internal Universal Power Supply |
| Suhu Operasi | 0°C nepi ka 50°C (32°F nepi ka 122°F) |
| Suhu Panyimpenan | -20°C nepi ka 70°C (-4°F nepi ka 158°F) |
| Kalembaban Operasi | 0% nepi ka 95% non-condensing |
10. Garansi jeung Rojongan
D-Link provides a limited warranty for this product. For detailed warranty information, please refer to the warranty card included with your product or visit the official D-Link websitus.
For technical support, product documentation, and firmware updates, please visit the D-Link support portal:
You can also find additional resources and community forums on the D-Link websitus.