D-Link DGS-1016C 16-Port Gigabit Unmanaged Ethernet Switch

Bubuka

The D-Link DGS-1016C is a 16-port Gigabit unmanaged switch designed for small office/home office (SOHO) and small to medium-sized business (SMB) environments. It provides high-speed network connectivity with plug-and-play simplicity, requiring no complex configuration. This switch supports energy-efficient Ethernet (IEEE 802.3az) to reduce power consumption and optimize energy usage based on cable length and network traffic.

Fitur konci:

• High-speed connections: Sixteen (16) Gigabit (10/100/1000) Ports for bandwidth-demanding networks.
• Plug-and-play installation: Easily set up your network without meticulous configuration.
• Energy-efficient: Saves energy and reduces power to Ports when there's no traffic.
• Intelligent power Optimization: Optimizes power usage for a port based on the length of cable connected to it.
• Solid, metal housing: Durable for rack mounting and lifetime use.
• Fanless design: Quiet operation that's ideal for office environments.
• Rack mountable: Mounts in standard 19" rack and sits on table tops.

Eusi pakét

Pariksa yén pakét anjeun ngandung barang-barang ieu:

• DGS-1016C 16-Port Gigabit Unmanaged Switch
• Adaptor kakuatan
• Pitunjuk Instalasi Gancang (QIG)
• 2 Rackmount Brackets
• 8 Obeng
• 4 Suku Karét

If any of the above items are missing or damaged, please contact your local D-Link reseller for replacement.

Disetél

Sateuacan Anjeun Ngawitan:

Ensure you have all the necessary components as listed in the "Package Contents" section. This switch is unmanaged, meaning it requires no software configuration for basic operation.

Pamasangan Desktop:

1. Teundeun saklar dina datar, permukaan stabil.
2. Attach the included rubber feet to the bottom of the switch to prevent scratching and provide stability.
3. Connect your network devices (computers, servers, network printers, etc.) to any of the 16 Gigabit Ethernet ports using standard RJ-45 Ethernet cables.
4. Connect the power adapter to the switch's power input and then to a power outlet.

Pamasangan Rackmount:

1. Attach the two rackmount brackets to the sides of the switch using the provided screws.
2. Pasangkeun saklar kana rak peralatan standar 19 inci nganggo sekrup rak anu pas (teu kalebet).
3. Sambungkeun alat jaringan anjeun ka port Ethernet.
4. Connect the power adapter to the switch's power input and then to a power outlet.

Ngoperasikeun Switch

The DGS-1016C is an unmanaged switch, meaning it operates automatically without the need for user configuration. Once powered on and connected to network devices, it will begin forwarding data.

Indikator LED:

The front panel of the switch features LED indicators for each port, providing visual status of network activity and connection speed.

• LED kakuatan: Nunjukkeun status kakuatan switch.
  • Dina: Saklar dihurungkeun.
  • Pareum: The switch is powered off or not receiving power.
• Link / Act LEDs (per port): Nunjukkeun status sambungan sareng aktivitas pikeun unggal port.
  • Solid Green (1000Mbps): A device is connected at Gigabit speed (1000 Mbps).
  • Solid Amber (10/100Mbps): A device is connected at 10 Mbps or 100 Mbps speed.
  • Kedip-kedip: Data is being transmitted or received on that port.
  • Pareum: Taya alat anu nyambung ka port, atanapi alat anu nyambung pareum.

Negosiasi otomatis:

Each port on the DGS-1016C automatically detects the network speed (10, 100, or 1000 Mbps) and duplex mode (half or full) of the connected device and adjusts accordingly. This ensures optimal performance without manual configuration.

Ethernet Hemat Énergi (EEE):

The switch supports IEEE 802.3az EEE, which automatically reduces power consumption during periods of low data activity. It also optimizes power usage based on the length of the connected Ethernet cable, further enhancing energy efficiency.

Pangropéa

The DGS-1016C is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure its longevity:

• beberesih: Anggo lawon anu lembut sareng garing pikeun ngabersihan bagian luar saklar. Entong nganggo pembersih cair atanapi aerosol.
• Ventilasi: Pastikeun yén bukaan ventilasi dina saklar teu diblokir. Ngajaga aliran hawa nyukupan sabudeureun alat pikeun nyegah overheating.
• Lingkungan: Operate the switch within its specified environmental conditions (temperature and humidity) to prevent damage. Avoid placing it in direct sunlight or near heat sources.
• kakuatan: Use only the power adapter supplied with the switch. Disconnect power during electrical storms or when unused for long periods.

Pamérésan masalah

If you encounter issues with your DGS-1016C switch, refer to the following common problems and solutions:

Henteu aya kakuatan:

• Pastikeun adaptor kakuatan disambungkeun sacara aman ka saklar sareng stop kontak listrik anu tiasa dianggo.
• Pariksa yen stop kontak listrik aktip ku cara nyolokkeun alat sejen.
• Check the power LED on the front panel; it should be illuminated.

Teu Aya Tautan/Kagiatan di Palabuhan:

• Pariksa yén kabel Ethernet parantos nyambung kalayan pageuh kana port switch sareng alat jaringan.
• Pastikeun alat jaringan anu nyambung hurung sareng tiasa dianggo kalayan leres.
• Coba nganggo kabel Ethernet anu béda pikeun nyingkirkeun kabel anu rusak.
• Test the connection with a different port on the switch.
• Check the Link/Act LED for the specific port; it should be solid or flashing.

Lambat Jaringan:

• Ensure all connected devices support Gigabit Ethernet (1000 Mbps) for optimal speed. The Link/Act LED should be green for Gigabit connections.
• Check for excessive network traffic or bandwidth-intensive applications running on connected devices.
• Verify the quality and length of your Ethernet cables. Cat5e or Cat6 cables are recommended for Gigabit speeds.

If these steps do not resolve your issue, please refer to the D-Link support website or contact D-Link technical support for further assistance.

spésifikasi

Garansi sareng Rojongan Téknis

D-Link products are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty information included with your product or visit the official D-Link websitus.

For technical support, product documentation, and software updates, please visit the D-Link support portal:

D-Link Rojongan Websitus

When contacting support, please have your product model number (DGS-1016C) and serial number ready.