1. Bubuka
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your KERN PFB 600-2 Precision Laboratory Balance. Please read these instructions carefully before using the device to ensure accurate measurements and prolong its lifespan.
2. Émbaran Kasalametan
- Salawasna operasikeun kasaimbangan dina permukaan anu stabil, rata sareng bébas tina geteran.
- Avoid exposing the balance to extreme temperatures, direct sunlight, or high humidity.
- Ulah ngaleuwihan kapasitas maksimum 600g.
- Keep liquids and corrosive substances away from the balance.
- Ngan ukur nganggo adaptor kakuatan anu disayogikeun.
3. Setélan
3.1 Ngabongkar sareng Inspeksi
Carefully remove the balance from its packaging. Inspect all components for any signs of damage. The package should contain the balance unit, weighing pan, draft shield (if applicable), and power adapter.
This image displays the KERN PFB 600-2 Precision Laboratory Balance. It features a white and blue casing, a circular weighing pan, and a clear glass draft shield. The digital display shows '0.00 g', and control buttons for 'PRINT/ESC', 'MODE', 'PCS', '%', 'TARE', and 'ON/OFF' are visible on the front panel.
3.2 Nempatkeun jeung Leveling
- Place the balance on a firm, level, and vibration-free surface.
- Adjust the leveling feet located at the bottom of the balance until the air bubble in the spirit level (usually located near the display) is centered.
3.3 Sambungan Daya
Connect the power adapter to the balance and then plug it into a suitable power outlet. Allow the balance to warm up for at least 30 minutes before initial use for optimal accuracy.
4. Parentah Operasi
4.1 Daya Hurung/Pareuman
- Pencét éta ON/OFF button to turn the balance on.
- Pencét jeung tahan tombol ON/OFF button to turn the balance off.
4.2 Timbangan Dasar
- Ensure the balance is level and the display shows '0.00 g'. If not, press the TAREUT tombol pikeun nol tampilan.
- Carefully place the item to be weighed onto the center of the weighing pan.
- Read the stable weight value displayed.
4.3 Fungsi Tare
The tare function allows you to weigh items in a container without including the container's weight.
- Teundeun wadah kosong dina pan timbangan.
- Pencét éta TAREUT button. The display will show '0.00 g'.
- Add the substance to be weighed into the container. The display will show only the net weight of the substance.
4.4 Konversi Unit
Pencét éta MODÉ button to cycle through available weighing units (e.g., grams, ounces, pounds, carats, etc.). The active unit will be indicated on the display.
4.5 Fungsi Ngitung (PCS)
This function allows for counting a large number of identical items.
- Place a known quantity of items (e.g., 10, 20, 50, 100 pieces) on the pan.
- Pencét éta PCS button. The display will prompt you to select the sampukuran le.
- Ngagunakeun éta MODÉ or % buttons to select the corresponding sample size (e.g., P10 for 10 pieces).
- Pencét PCS again to confirm. The balance is now in counting mode.
- Add more items, and the display will show the total count.
4.6 Perséntage Weighing (%)
This function allows you to determine the percentage of a sample relative to a reference weight.
- Nempatkeun rujukan sample dina panci timbangan.
- Pencét éta % button. The display will show '100.00%'.
- Leupaskeun rujukan sample jeung nempatkeun sample to be measured. The display will show its weight as a percentage of the reference sample.
4.7 Print Function
If connected to a compatible printer or PC, pressing the PRINT/ESC button will send the current weighing data to the connected device.
5. Pangropéa
5.1 beberesih
- Salawasna pegatkeun sambungan kakuatan saméméh beberesih.
- Wipe the balance exterior with a soft, damp lawon. Anggo detérjen hampang upami diperlukeun.
- Do not use abrasive cleaners, solvents, or immerse the balance in water.
- Clean the weighing pan regularly to prevent accumulation of dust or debris.
5.2 Panyimpenan
When not in use for extended periods, store the balance in a dry, dust-free environment at room temperature. Ensure the draft shield is in place to protect the weighing mechanism.
5.3 Kalibrasi ulang
Periodic calibration with certified weights is recommended to maintain accuracy. Refer to the balance's specific calibration procedure in the full technical manual or contact KERN support for guidance.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Display shows 'Err' or 'Overload' | Beurat ngaleuwihan kapasitas maksimum. | Ngaleungitkeun kaleuwihan beurat. |
| Bacaan teu akurat | Balance not level, vibrations, temperature fluctuations, need for calibration. | Check leveling, move to stable surface, allow warm-up, perform calibration. |
| Tampilan henteu hurung | No power, faulty adapter. | Check power connection, try a different outlet, verify adapter functionality. |
| Display shows '0.00' but weight is on pan | Tare function was activated with item on pan. | Remove item, press TAREUT to zero, then re-weigh. |
7. Spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | PFB 600-2 |
| Kamampuh maksimum | 600 g |
| Dimensi produk | 12.4 x 8.27 x 3.54 inci |
| Item Beurat | 4.41 pon |
| Tipe tampilan | Digital |
| Fitur husus | High Precision, High Weight Capacity, Digital Display |
| Dianjurkeun Mangpaat | Laboratory/Scientific Applications, Jewellery |
8. Émbaran jaminan
KERN products are manufactured to high-quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and duration, please refer to the warranty card included with your product or visit the official KERN websitus. Simpen resi pameseran anjeun salaku bukti pameseran.
9. Rojongan
For technical assistance, service, or further inquiries regarding your KERN PFB 600-2 Precision Laboratory Balance, please contact KERN customer support. Contact details can typically be found on the KERN official websitus atanapi dina dokuméntasi disadiakeun kalawan pameseran Anjeun.