Proteus AMBIO PSHT07 Wifi Temperature Humidity Sensor User Manual

1. Bubuka

The Proteus AMBIO PSHT07 is a cloud-connected Wi-Fi temperature and humidity sensor designed to monitor environmental conditions and provide alerts. This device connects directly to your home or office Wi-Fi network, eliminating the need for a separate hub or gateway. It sends alerts via email and text messages to multiple contacts when predefined temperature or humidity thresholds are exceeded. The unit also features a programmable smart buzzer for local audible alerts.

This manual provides detailed instructions for setting up, operating, and maintaining your Proteus AMBIO sensor to ensure optimal performance and reliable environmental monitoring.

2. Naon dina Box

Upon unboxing your Proteus AMBIO PSHT07, please ensure all the following items are present:

• Proteus AMBIO Sensor Unit
• Adaptor kakuatan
• External Sensor Cable (3 inches)
• Gancang Mimitian Guide

3. Parentah Setup

Follow these steps to set up your Proteus AMBIO sensor:

3.1. Initial Power On and Connection

1. Colokkeun Alat: Connect the external sensor cable to the Proteus AMBIO unit. Plug the power adapter into a standard wall outlet and then connect it to the sensor unit. The LED indicator on the sensor will flash green upon initial power-up.
2. Activate Setup Mode: Press and hold the button on the sensor unit until the LED indicator turns blue. This indicates the device is in setup mode and broadcasting its own Wi-Fi network (e.g., "ProteusSetup-XXXXX").
3. Connect to Setup Wi-Fi: On your smartphone, tablet, or computer, go to your Wi-Fi settings and connect to the "ProteusSetup-XXXXX" network.
4. Access Setup Portal: A setup portal should automatically open in your web browser. If it does not, open your web browser tur arahkeun ka http://192.168.3.3.
5. Turutan ajakan dina layar: The portal will guide you through selecting your home/office Wi-Fi network and entering its password. You will also configure alert settings for temperature and humidity thresholds.
6. Setup lengkep: Once configured, the sensor will connect to your chosen Wi-Fi network, and the LED indicator will turn green. The setup is complete.

For a visual guide on the unboxing and setup process, please refer to the video below:

4. Parentah Operasi

4.1. Pangimeutan jauh

Once your Proteus AMBIO sensor is set up, you can monitor temperature and humidity data remotely through the Proteus web portal. Access the portal from any web browser on your smartphone, tablet, or computer. The dashboard displays real-time readings and allows you to adjust settings as needed.

4.2. Alert Configuration

You can customize alert thresholds for both temperature and humidity. When readings fall outside your set range, the sensor will trigger alerts. Alerts can be sent to multiple email addresses and phone numbers via text message. The built-in buzzer will also sound locally.

• Tanda Suhu: Set minimum and maximum temperature values.
• Humidity Alerts: Set minimum and maximum relative humidity percentages.
• Kakuatan Outage Bewara: The device will notify you if it loses power and when power is restored.
• Kontrol Buzzer: The smart buzzer can be programmed to turn off automatically after a set period to prevent prolonged noise.

4.3. Multi-Sensor Management

If you have multiple Proteus sensors, they can all be managed from a single dashboard, providing a centralized view of all monitored locations. You can also grant view-only access to trusted individuals for shared monitoring.

5. Spésifikasi

6. Cara ngungkulan

If you encounter issues with your Proteus AMBIO sensor, consider the following troubleshooting steps:

• Henteu aya sambungan Wi-Fi: Ensure the sensor is within range of your Wi-Fi router. Check your Wi-Fi password and re-enter it during the setup process if necessary. Restart your Wi-Fi router and the sensor.
• Bacaan anu salah: Verify the external sensor cable is securely connected. Ensure the sensor is placed in an area that accurately reflects the conditions you wish to monitor, away from direct heat sources or drafts.
• Bewara Teu Ditampi: Check your email spam folder. Verify that the email addresses and phone numbers configured for alerts are correct in the Proteus web portal. Ensure your device has an active internet connection.
• Buzzer Not Sounding: Check if the smart buzzer is enabled and its programmable off-time is not set too short.
• Alat Offline: If the device appears offline, check for power outages or Wi-Fi network issues. The device will send a power outage alert if configured.

7. Pangropéa

The Proteus AMBIO sensor requires minimal maintenance:

• beberesih: Wipe the sensor unit and external probe with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• panempatan: Ensure the sensor is placed in a location where it can accurately measure temperature and humidity without obstruction. The 3-inch external sensor cable allows for flexible placement.
• Pembaruan firmware: Periodically check the Proteus web portal or support website for any available firmware updates to ensure your device has the latest features and security enhancements.

8. Garansi jeung Rojongan

Specific warranty information was not provided in the product data. For detailed warranty terms, technical support, or to request a longer sensor cable, please contact Proteus customer support directly via their official website, ProteusSensor.com.