Leviton GFSW1-W Smartlockpro GFCI Receptacle & Switch Instruction Manual

1. Bubuka

This manual provides essential information for the safe installation, operation, and maintenance of your Leviton GFSW1-W Smartlockpro Tamper-Resistant Combo GFCI Receptacle & Switch. This device combines a ground fault circuit interrupter (GFCI) receptacle with a standard switch, offering enhanced electrical safety and convenience in a single unit. Please read these instructions thoroughly before beginning installation or use.

2. Émbaran Kasalametan

WARNING: RISK OF ELECTRIC SHOCK OR FIRE. IMPROPER INSTALLATION OR USE MAY RESULT IN SERIOUS INJURY OR DEATH.

• Pareuman heula daya dina pemutus sirkuit atawa kotak sekering sateuacan masang atawa ngalayanan alat ieu.
• Pamasangan kedah dilakukeun ku tukang listrik anu mumpuni saluyu sareng sadaya kode listrik nasional sareng lokal.
• Do not use this device with aluminum wiring. Use only with copper or copper-clad wire.
• Pastikeun sadaya sambungan kabel aman sareng insulated leres.
• This device is designed for indoor use in dry locations unless otherwise specified.

3. Fitur Produk

• Fungsi Self-Test: Provides continuous ground fault protection by automatically testing the GFCI. It detects and trips on actual ground faults even during self-testing.
• Initial Power-Up Test: Tests the GFCI within 3 seconds of initial power-up.
• Auto-Monitoring: Exceeds UL requirements by adapting and shifting to more frequent testing if a potential problem is detected.
• Protection Status Indicator: An LED light provides simple, intuitive feedback on power and protection status, including indication of line/load reversal.
• Patented Bridge Contact: Ensures no power is delivered to the receptacle face if improperly wired (line-load reversed).
• Kekebalan anu ditingkatkeun: Improved immunity to high-frequency noise reduces nuisance tripping.
• Surge Resistance: Advanced electronics provide superior resistance to electrical surges and over-voltages.
• Lockout Action: Patented lockout action prevents reset if the GFCI is damaged and cannot respond to a ground fault.
• TampWadah anu tahan er: Designed to prevent insertion of foreign objects into the receptacle openings.
• Konstruksi awét: Features an impact-resistant thermoplastic cover and polycarbonate body.

4. Spésifikasi

5. Instalasi (Setup)

PENTING: Turn OFF power at the circuit breaker or fuse box before wiring. Failure to do so may result in serious injury or death.

1. Nyiapkeun Wiring: Carefully remove the existing device from the wall box. Identify the LINE (incoming power) and LOAD (downstream protection) wires. If you are unsure, consult a qualified electrician.
2. Sambungkeun Kawat:
   • Connect the LINE hot wire to the brass LINE terminal.
   • Connect the LINE neutral wire to the silver LINE terminal.
   • If protecting downstream receptacles, connect the LOAD hot wire to the brass LOAD terminal.
   • If protecting downstream receptacles, connect the LOAD neutral wire to the silver LOAD terminal.
   • Connect the ground wire to the green ground screw.
   • Pastikeun sadaya sambungan kedap tur aman.
3. Pasang Alat: Carefully fold the wires into the wall box. Mount the GFCI receptacle and switch into the wall box using the provided screws.
4. Pasang Wallplate: Attach the wallplate (not included) over the device.
5. Mulangkeun Daya: Turn ON power at the circuit breaker or fuse box.
6. Uji GFCI: Perform the initial test as described in the "Operation" section to ensure proper functioning.

Image: The Leviton GFSW1-W Smartlockpro GFCI Receptacle and Switch, white in color, shown installed on a white tiled wall. It features a rocker switch at the top, and below it, a GFCI receptacle with "RESET" and "TEST" buttons, and a small LED indicator light.

6. Operasi

The Leviton GFSW1-W combines a standard light switch with a GFCI-protected receptacle.

• Fungsi switch: The top rocker switch operates connected lighting or other loads. Press the top to turn ON, press the bottom to turn OFF.
• GFCI Receptacle: The lower portion provides a 15 Amp, 125 Volt tamper-resistant outlet with ground fault protection.
• Nguji GFCI:
  1. Colokkeun alamp or other device into the GFCI receptacle and turn it ON.
  2. Pencét tombol "TEST". The GFCI kedah lalampahan, sarta lamp/device should turn OFF. The LED indicator may change color or turn off.
  3. Pencét tombol "RESET". GFCI kedah ngareset, sarta lamp/device should turn ON. The LED indicator should return to its normal operating state (e.g., green).
  4. If the GFCI does not trip or reset as described, it may be improperly wired or defective. Do not use and consult a qualified electrician.
• Ngareset GFCI: If the GFCI trips (power is interrupted), press the "RESET" button firmly. If it does not reset, check for a ground fault or consult the troubleshooting section.

7. Pangropéa

Regular testing of your GFCI device is crucial to ensure continued protection against ground faults. Leviton recommends testing your GFCI monthly.

• Follow the "Testing the GFCI" procedure outlined in the Operation section at least once a month.
• If the GFCI fails to trip or reset during testing, it must be replaced immediately.
• Keep the device and wallplate clean. Use a soft, damp cloth for cleaning; avoid abrasive cleaners or solvents.

8. Cara ngungkulan

9. Garansi jeung Rojongan

Limited Two-Year Product Warranty: Leviton warrants this product to be free from defects in material and workmanship under normal use and service for a period of two years from the date of original purchase. For complete warranty details, please refer to the documentation included with your product or visit the official Leviton websitus.

Rojongan Palanggan: If you require assistance with installation, troubleshooting, or have questions about your Leviton GFSW1-W device, please contact Leviton Customer Service. Contact information can typically be found on the product packaging or the official Leviton websitus (www.leviton.com).