Buku Panduan Pangguna Neraca Laboratorium Presisi KERN PCD 6K-4

1. Bubuka

This manual provides essential instructions for the safe and efficient operation of your KERN PCD 6K-4 Precision Laboratory Balance. This laboratory scale features a separate weighing platform, making it ideal for use in specialized environments such as glove-bags or extractor cabinets, particularly when weighing toxic, volatile, or contaminated substances. It includes a PRE-TARE function for manual extraction of known container weights, useful for precise filling quantity controls.

Mangga baca manual ieu kalawan saksama sateuacan dianggo mimiti sareng simpen kanggo rujukan ka hareup.

2. Parentah Kasalametan

• Salawasna operasikeun kasaimbangan dina permukaan anu stabil, rata sareng bébas tina geteran.
• Avoid exposing the balance to extreme temperatures, direct sunlight, or high humidity.
• Ulah ngaleuwihan kapasitas maksimum 6000g.
• Keep the balance clean and free from dust and chemical spills.
• Paké ngan adaptor kakuatan disadiakeun kalawan alat.
• Do not attempt to disassemble or repair the balance yourself. Refer to qualified service personnel.

3. Eusi Paket

Pastikeun yén sadaya barang aya sareng henteu ruksak nalika ngabongkar:

• KERN PCD 6K-4 Weighing Platform
• Unit Témbongkeun Digital
• Adaptor kakuatan
• Wind Protection Ring (for models with Ø 105 mm weighing plate)
• Panutup Kasalametan
• Manual pangguna (dokumén ieu)

Figure 1: KERN PCD 6K-4 Precision Laboratory Balance
This image shows the KERN PCD 6K-4 precision laboratory balance. It consists of a square weighing platform with a stainless steel surface, connected by a cable to a separate digital display unit. The display unit features a large digital readout, along with buttons for ON/OFF, MODE/CAL, SET/M, PRINT, and TARE. The display indicates a maximum capacity of 3500g and a readability of 0.01g, though the model is 6K-4 (6000g max). The separate design is ideal for use in specialized environments like glove-bags.

4. Setélan

1. panempatan: Place the weighing platform and display unit on a stable, vibration-free, and level surface. Ensure sufficient space for operation and avoid direct sunlight, drafts, or significant temperature fluctuations.
2. Majelis: Connect the cable from the weighing platform to the designated port on the digital display unit.
3. Leveling: Use the adjustable foot bolts located on the underside of the weighing platform to level the balance. Observe the integrated spirit level (if present) to ensure precise horizontal alignment.
4. Perlindungan Angin: If your model includes a wind protection ring (for Ø 105 mm weighing plates), carefully place it around the weighing platform. This helps stabilize readings in environments with air currents.
5. Sambungan Daya: Connect the power adapter to the display unit and then plug it into a suitable power outlet.

5. Parentah Operasi

5.1 Daya Hurung/Pareuman

• To turn the balance ON, pencét tombol ON/OFF button. The display will show a self-test and then settle at 0.00g.
• To turn the balance Pareum, pencét jeung tahan tombol ON/OFF tombol nepi ka tampilan pareum.

5.2 Timbangan Dasar

1. Ensure the balance is powered on and displays 0.00g.
2. Sacara ati-ati tempatkeun barang anu badé ditimbang dina tengah-tengah papan timbangan.
3. Wait for the display to stabilize. The stable weight will be shown.
4. Cabut barang éta tina platform.

5.3 TARE Function

The TARE function allows you to subtract the weight of a container, so only the net weight of the contents is displayed.

1. Place the empty container onto the weighing platform. The display will show its weight.
2. Pencét éta TAREUT tombol. Tampilan bakal diset ulang ka 0.00g.
3. Tambahkeun zat anu badé ditimbang kana wadahna. Layar bakal némbongkeun beurat bersih zat éta.

The balance also features a PRE-TARE function for manual entry of a known container weight. Consult the full manual for detailed instructions on using PRE-TARE, typically accessed via the MODE/KAL or SET/M button in specific modes.

5.4 Unit Selection / Mode

Pencét éta MODE/KAL button to cycle through available weighing units (e.g., grams, kilograms, pounds, ounces) or to enter different operating modes. Refer to the full manual for a list of supported units and mode functions.

5.5 Kalibrasi

Regular calibration ensures the accuracy of your balance. Calibration should be performed using certified calibration weights.

1. Ensure the balance is stable and free from any load.
2. Pencét jeung tahan tombol MODE/KAL pencét tombol "CAL" nepi ka muncul dina layar.
3. Follow the on-screen prompts to place the required calibration weight(s) onto the platform.
4. Once calibration is complete, the balance will return to weighing mode.

Note: Specific calibration procedures may vary. Always consult the detailed instructions provided with your balance for precise steps and recommended calibration weights.

5.6 Print Function

If your balance is connected to a compatible printer or data interface, pressing the nyitak button will send the current weighing data to the connected device.

6. Pangropéa

• beberesih: Cabut listrik sateuacan beberesih. Anggo lap anu lemes sarengamp cloth with a mild detergent to clean the weighing platform and display unit. Avoid abrasive cleaners or solvents. Ensure no liquid enters the device.
• Panyimpenan: When not in use for extended periods, store the balance in a clean, dry, and stable environment. Use the provided safety cover to protect it from dust.
• Pamariksaan: Regularly inspect the power cable and connections for any signs of damage.

7. Cara ngungkulan

8. Spésifikasi

• model: KERN PCD 6K-4
• merek: KERN
• Kamampuh Maksimum: 6000 g (6 kg)
• Kabacaan: Typically 0.01 g (Note: Image shows 0.01g for a 3500g model, actual readability for 6000g model may vary slightly, but is generally in this precision range.)
• Jenis tampilan: Digital
• Fitur husus: PRE-TARE function
• Pamakéan anu disarankeun: Laboratory/scientific applications
• Ukuran produk: 11.02 x 6.5 x 2.95 inches (Weighing platform and display unit combined/approximate)
• Pabrikan: KERN & SOHN GmbH

9. Garansi jeung Rojongan

For warranty information, technical support, or service inquiries, please contact your KERN dealer or visit the official KERN websitus. Simpen resi pameseran sareng nomer seri produk anjeun nalika ngahubungi dukungan.