Philips Lighting 5058131PN

Lampu Sorot LED Philips myLiving PONGEE (Modél 5058131PN) Buku Panduan Pangguna

1. Bubuka

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Philips myLiving PONGEE white LED Spot Light, angled view

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Émbaran Kasalametan

Salawasna perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan:

  • Kasalametan listrik: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
  • Pamakéan jero rohangan wungkul: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
  • Jenis bohlam: Paké ngan GU10 bulbs LED sakumaha dieusian. Ulah ngaleuwihan wat maksimumtage dituduhkeun dina fixture nu.
  • Penanganan: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
  • beberesih: Bersihkeun alatna ku lawon anu lemes sareng garing. Entong nganggo pembersih atanapi pelarut anu abrasif.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

  • Philips myLiving PONGEE LED Spot Light fixture (1 unit)
  • Hardware dipasang (screws, colokan témbok)
  • Buku pituduh

Catetan: A GU10 LED bulb is teu kaasup sarta kudu dibeuli misah.

Packaging box for Philips myLiving PONGEE LED Spot Light

Gambar 2: Bungkusan Produk

4. Setup jeung Instalasi

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Dimensional drawing of Philips myLiving PONGEE LED Spot Light showing measurements in millimeters

Figure 3: Product Dimensions (all measurements in mm)

  1. Nyiapkeun Area Instalasi: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
  2. Pegatkeun Daya: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
  3. Pasang pangkalan: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
  4. Kawat Fixture: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
  5. Pasang bohlam: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
  6. Pasangkeun Awak Perlengkapan: Secure the main body of the spot light to the mounted base.
  7. Mulangkeun Daya: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Parentah Operasi

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

  • Hurungkeun/Pareuman: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
  • Nyaluyukeun Arah Cahaya: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Pangropéa

  • beberesih: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
  • Ngagantian bohlam:
    1. Pareuman catu daya dina pemutus sirkuit.
    2. Allow the bulb to cool completely.
    3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
    4. Selapkeun bohlam LED GU10 anyar ku aligning pin na twisting saarah jarum jam nepi ka aman.
    5. Mulangkeun kakuatan.

7. Cara ngungkulan

MasalahMungkin Cukang lantarananaSolusi
Lampu henteu hurung.
  • Taya catu daya.
  • Bohlam lepat atanapi henteu dipasang leres.
  • Sambungan kabel leupas.
  • Pariksa circuit breaker atawa sekering.
  • Ensure the wall switch is ON.
  • Replace the bulb with a new GU10 LED bulb.
  • Consult a qualified electrician to check wiring connections.
Cahya ngageleber.
  • Sambungan bohlam leupas.
  • Saklar dimmer sauyunan (lamun lumaku).
  • Bohlam salah.
  • Ensure the bulb is securely twisted into the socket.
  • If using a dimmer, ensure it is compatible with LED bulbs.
  • Ganti bohlam.

8. Spésifikasi

  • merek: Lampu Philips
  • Jumlah modél: 5058131PN
  • Ukuran produk (L x W x H): 10 x 13.8 x 8.2 cm
  • Beurat barang: 345 gram
  • Bahan: logam
  • warna: Bodas
  • Gaya: Modern
  • Jenis Sumber Cahaya: LED
  • Bulb Socket Type: GU10
  • Jumlah Bulbs: 1 (bulb not included)
  • Masukan Voltage: 220-240 Volt
  • Sumber Daya: Electrical cable (wired)
  • Jenis pamasangan: Surface Mount (Ceiling/Wall)
  • Peunteun IP: IP20 (pamakéan jero rohangan wungkul)
  • Fitur husus: Energy-efficient, Swivel head
  • Mangpaat husus: Home, Bedroom, Living Room

9. Garansi jeung Rojongan

Kanggo inpormasi garansi sareng dukungan palanggan, mangga tingali kartu garansi anu kalebet dina produk anjeun atanapi kunjungi kantor Philips Lighting resmi. websitus. Anjeun oge bisa ngahubungan pangecér Anjeun pikeun pitulung.

Simpen bukti pameseran anjeun pikeun klaim garansi.

Dokumén Patali - 5058131PN

Praview Lembar Data Lampu LED Daya Luhur Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10
Lembar data téknis pikeun Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10, lampu LED efisiensi tinggi kalayan fitur, spésifikasi, sareng data aplikasi canggih. Ngawengku detil kinerja, mékanis, sareng listrik.
Praview Philips TubePoint: Kisaran Luminaire Kinerja Tinggi pikeun Torowongan Lalu Lintas
Ngajalajah rentang luminaire Philips TubePoint, direkayasa pikeun solusi cahaya efisien, ongkos-éféktif, jeung dipercaya dina torowongan lalulintas. Leaflet kulawarga produk ieu rinci ngeunaan fitur, mangpaat, spésifikasi téknis, sareng variasi modél pikeun panerangan torowongan anu optimal.
Praview Manual Kualitas Lampu Philips
Manual Kualitas ieu ngajelaskeun Sistem Kualitas Pencahayaan Philips, anu ngajelaskeun sacara rinci prosés, standar, sareng komitmen kana kualitas. Manual ieu janten suplemén pikeun Sistem Bisnis Pencahayaan Philips, anu mastikeun produk sareng jasa nyumponan sarat ISO 9001 sareng ekspektasi palanggan.
Praview Lampu LED Philips CoreLine anu Dipasang dina Témbok
Panggihan luminaire LED Philips CoreLine Wall-Mounted, solusi pencahayaan anu inovatif, gampang dianggo, sareng kualitas luhur pikeun rupa-rupa aplikasi sapertos koridor, tangga, sareng lawang umum. Brosur ieu ngajelaskeun fitur, kauntungan, spésifikasi téknis, sareng inpormasi produkna.
Praview Philips OccuSwitch LRM1070/00 PIR Anwesenheitssensor Datenblatt
Datenblatt für den intelligenten Philips OccuSwitch LRM1070/00 Anwesenheitssensor. Bietet PIR-Technologie, tageslichtabhängige Schaltung, integriertes Relais und Deckeneinbau. Enthält technische Spezifikationen und Abmessungen.
Praview Saklar Detektor Gerakan sareng Lampu Philips OccuSwitch LRM1070/00
Panggihan Philips OccuSwitch LRM1070/00, detektor gerakan anu cerdas kalayan saklar terintegrasi anu dirancang pikeun ngahémat énergi ku cara mareuman lampu sacara otomatis di rohangan anu teu aya. Idéal pikeun rohangan dugi ka 25 m², éta tiasa nanganan beban dugi ka 6A sareng nampilkeun pamasangan anu gampang kalayan konektor anu tiasa dicabut.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.