Anmytek W0018 Rustic Wood Farmhouse Wall Sconce Instruction Manual

Bubuka

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Anmytek W0018 Rustic Wood Farmhouse Wall Sconce. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Anmytek W0018 is a single-light wall sconce designed for indoor use, featuring a rustic wood accent, a metal base, and a clear bubble glass shade. It is suitable for various indoor settings such as bathrooms, bedrooms, living rooms, kitchens, and hallways.

Émbaran Kasalametan

• PERHATOSAN: Always turn off the electrical supply at the main circuit breaker or fuse box before beginning installation or performing any maintenance. Failure to do so may result in electrical shock, injury, or death.
• Taroskeun ka tukang listrik anu mumpuni upami anjeun teu yakin ngeunaan prosés pamasangan atanapi gaduh patarosan ngeunaan listrik.
• Pastikeun sadaya sambungan listrik aman sareng sasuai sareng kode listrik lokal.
• Ulah ngaleuwihan wat maksimumtage specified for the light bulb (60 Watts).
• This fixture is designed for indoor use only. Do not expose to moisture or use in wet locations.
• Nanganan komponén kaca kalayan ati-ati pikeun nyegah pegatna.

Eusi pakét

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.

• Wall Sconce Fixture Body (with wood accent and metal base)
• Bubble Glass Shade
• Mounting Hardware (mounting plate, screws, wire nuts)
• Instruksi Manual

Note: Light bulb is not included. An E26 base bulb (max 60W) is required.

spésifikasi

Dimensi produk

Figure 1: Product Dimensions. The fixture measures approximately 8 inches in height, 4.75 inches in width, and extends 5 inches from the wall. The glass shade is 5.5 inches high and 3.5 inches in diameter.

Setup sareng Instalasi

Before you begin, ensure you have the necessary tools: screwdriver, wire strippers, electrical tape, and safety glasses.

1. Pareuman Daya: Locate the circuit breaker that supplies power to the light fixture location and turn it OFF. Verify power is off using a voltage panguji.
2. Nyiapkeun Plat Pemasangan: Attach the mounting plate to the junction box in the wall using the provided screws. Ensure it is securely fastened.
3. Sambungan Kawat: Carefully connect the electrical wires.
   • Nyambungkeun kawat taneuh tambaga héjo atawa bulistir ti fixture kana kawat taneuh from the junction box (usually bare copper or green) using a wire nut.
   • Nyambungkeun kawat bodas (nétral). ti fixture kana kawat bodas (nétral). from the junction box using a wire nut.
   • Nyambungkeun black (live) wire ti fixture kana black (live) wire from the junction box using a wire nut.
   Ensure all connections are tight and secure. Wrap electrical tape around wire nuts for added security.
4. Pasang Perlengkapan: Carefully tuck the wires into the junction box. Align the fixture body with the mounting plate and secure it with the provided screws. The fixture can be mounted with the glass shade facing up or down, depending on your preference and location.
5. Pasang Bulb: Screw an E26 base light bulb (maximum 60 Watts) into the socket. Do not overtighten.
6. Pasang Kaca Shade: Carefully place the bubble glass shade over the bulb and secure it according to the fixture design (typically by screwing a retaining ring onto the socket).
7. Mulangkeun Daya: Turn the electrical supply back ON at the circuit breaker. Test the light fixture.

Figure 2: E26 Bulb Socket Detail. This image shows the E26 bulb socket and the mechanism for securing the glass shade.

Figure 3: Assembled Fixture Detail. This image provides a detailed view of the assembled wall sconce, showcasing its design elements.

Parentah Operasi

The Anmytek W0018 wall sconce operates via a standard wall switch (push button type, as per specifications) connected to your home's electrical system. Once installed and powered, simply use the wall switch to turn the light on or off.

• Ensure the correct E26 bulb (max 60W) is installed.
• The fixture is designed for general illumination in indoor spaces.

Figure 4: Illuminated Fixture. This image shows the wall sconce in operation, providing light.

Pangropéa

• beberesih: To clean the fixture, ensure the power is off and the fixture is cool. Wipe the metal and wood surfaces with a soft, dry cloth. For the glass shade, a slightly damp lawon bisa dipaké, dituturkeun ku lawon garing pikeun nyegah noda cai. Entong nganggo pembersih atanapi pangleyur anu abrasif, sabab éta tiasa ngaruksak lapisan akhir.
• Ngagantian bohlam: Before replacing a bulb, turn off the power at the circuit breaker and allow the bulb to cool completely. Unscrew the old E26 bulb and screw in a new E26 bulb (maximum 60 Watts). Ensure the new bulb is securely seated before restoring power.
• Pamariksaan: Periodically inspect the fixture for any signs of wear, loose connections, or damage. If any issues are found, turn off power and consult a qualified electrician or contact customer support.

Pamérésan masalah

Garansi sareng Rojongan

The Anmytek W0018 wall sconce comes with a manufacturer-and-seller-combination warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the documentation provided at the time of purchase or contact Anmytek customer support directly.

If you encounter any issues not covered in this manual or require further assistance, please contact Anmytek customer support. You can often find contact information on the product packaging or by visiting the official Anmytek store page online.

Kanggo inpo nu leuwih lengkep, buka di Anmytek Store.