AIKE AK2005H

AIKE AK2005H HEPA Filtered Vertical Hand Dryer Instruction Manual

Model: AK2005H

Bubuka

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your AIKE AK2005H HEPA Filtered Vertical Hand Dryer. Please read these instructions thoroughly before installation and use, and retain for future reference.

Multiple AIKE AK2005H Hand Dryers in a Commercial Restroom

Image: Multiple AIKE AK2005H hand dryers installed in a commercial restroom setting.

Parentah Kasalametan

Fitur produk

spésifikasi

Fitur Rincian
Nomer modél AK2005H
Kakuatan 1850 Watt
Voltage 110-130V
Waktos Pangeringan 7-10 detik
Jenis Filter Dua-stage saringan HEPA
Bahan Panutup ABS polikarbonat
Dimensi produk 26.97 x 11.81 x 8.66 inci
Item Beurat 18.7 pon
AIKE AK2005H Hand Dryer Dimensions

Image: Product dimensions for the AIKE AK2005H hand dryer, showing height, width, and depth.

Setup sareng Instalasi

The AIKE AK2005H hand dryer is designed for wall-mounted installation. Professional installation is recommended to ensure proper wiring and secure mounting.

  1. Pilih Lokasi: Select a suitable wall location, ensuring adequate space around the unit for use and maintenance. Consider proximity to a power source.
  2. Pamasangan: Securely mount the hand dryer to the wall using appropriate hardware for your wall type. Ensure it is level and firmly attached.
  3. Sambungan listrik: This unit is designed for hardwired installation. Connect the electrical wiring (Live, Neutral, Ground) to the terminal block located behind the access panel. Refer to the diagram below for correct connections.
Hardwired Connection Diagram for AIKE Hand Dryer

Image: Diagram showing the hardwired electrical connection points (H, h, L, N) for the AIKE hand dryer, indicating where to connect power wires.

  1. Power-Up mimiti: After installation, restore power to the circuit. The unit should power on, indicated by blue lights and a display.

Parentah Operasi

The AIKE AK2005H hand dryer features automatic, touch-free operation for maximum hygiene.

  1. Aktipkeun: Place your hands into the drying chamber from the top opening. Sensors will detect your hands and activate the airflow.
  2. Prosés garing: Move your hands slowly up and down within the drying chamber to ensure all surfaces are dried evenly. The unit will typically dry hands within 7-10 seconds. A countdown timer may be visible on the display.
  3. Nonaktipkeun: Remove your hands from the drying chamber. The airflow will automatically stop.
Person using AIKE AK2005H Hand Dryer

Image: A person demonstrating the use of the AIKE vertical hand dryer by placing hands into the drying slot.

Adjusting Settings (Hidden Switch)

The hand dryer includes a hidden switch panel for adjusting heat and speed settings. This panel is typically located on the side of the unit, accessible by opening a small cover.

AIKE Hand Dryer Hidden Switch Panel

Image: Close-up of the AIKE hand dryer showing the hidden switch panel with controls for 'Hot' (On/Off) and 'Speed' (H/L), along with the dual air outlet and drain tank.

Pangropéa

Regular maintenance ensures the longevity and hygienic performance of your AIKE hand dryer.

  1. Bersihan Luar: Ngusap beungeut luar ku lemes, damp lawon jeung detergent hampang. Ulah make cleaners abrasive atawa pangleyur.
  2. Drain Tank Emptying: The hand dryer is equipped with a drain tank to collect excess water. Periodically check and empty the drain tank to prevent overflow and maintain hygiene. The drain tank is typically located at the bottom of the unit and can be pulled out for emptying.
  3. Ngagantian Filter HEPA: Dua-stage HEPA filter should be inspected and replaced periodically, depending on usage and environmental conditions. A dirty filter can reduce airflow and efficiency. The filter is accessible from the bottom of the unit.
AIKE Hand Dryer Two-Stage HEPA Filter Diagram

Gambar: Diagram anu ngagambarkeun dua-stage HEPA filter system within the AIKE hand dryer, showing air intake, filtration, and clean air output.

Pamérésan masalah

Masalah Mungkin Cukang lantaranana Solusi
Pangering leungeun teu tiasa diaktipkeun. No power, sensor obstruction, or sensor malfunction. Check power supply. Ensure hands are placed correctly in the sensor area. Clean sensor window.
Aliran hawa lemah. Clogged HEPA filter, air intake/outlet obstruction. Inspect and replace HEPA filter. Clear any obstructions from air intake or outlet.
Leak cai. Full or improperly seated drain tank. Empty and correctly re-seat the drain tank.
Unitna jalan terus-terusan. Karusakan sensor atanapi halangan. Clean sensor window. If problem persists, contact support.

Garansi sareng Rojongan

The AIKE AK2005H HEPA Filtered Vertical Hand Dryer comes with a garansi 2 taun, including free parts and custom services.

For technical support, warranty claims, or service inquiries, please contact AIKE customer service through their official channels. Please have your model number (AK2005H) and purchase date available when contacting support.

You can visit the official AIKE store for more information: AIKE Store on Amazon