AIKE HEPA Filtered Vertical Hand Dryer Ultimate (Model AK2030) Instruction Manual

1. Produk Langkungview

The AIKE AK2030 is a high-speed, HEPA-filtered vertical hand dryer designed for commercial use. It features a durable brushless motor and efficient drying capabilities, ensuring quick and hygienic hand drying.

Fitur konci:

• Permanent magnet brushless motor for reliable performance.
• UL Approved, operating at 110-120V, 14.16 amps, 60 Hz, with a noise level of 68-70 decibels.
• Equipped with a 55-inch wire and 3-pin plug for simple outlet connection, also suitable for hard-wired installations.
• Dual HEPA filter system captures hazardous germs and particles, promoting a cleaner washroom environment.
• Dries hands in 10 seconds or less, suitable for high-traffic areas.

Figure 1: AIKE AK2030 hand dryers in a commercial setting.

2. Setup jeung Instalasi

Before installation, ensure the mounting surface is sturdy and capable of supporting the unit's weight (approximately 27 pounds). The hand dryer requires a 110-120V power supply. It comes with a 55-inch wire and a 3-pin plug for direct connection to an outlet. For hard-wired installations, consult a qualified electrician.

ukuran:

• Ukuran Paket: 29.6 x 14.2 x 11.2 inci
• Unit Height: 27.55 inches (700mm)
• Unit Width: 11.81 inches (300mm)
• Unit Depth: 6.69 inches (170mm)

Figure 2: AIKE AK2030 Hand Dryer Dimensions.

3. Parentah Operasi

To operate the AIKE AK2030 hand dryer, simply place your wet hands into the drying chamber from the top opening. The dryer will automatically activate. Move your hands slowly up and down within the chamber to ensure all surfaces are exposed to the airflow. The powerful air jets will dry your hands efficiently, typically within 10 seconds.

Figure 3: Proper hand placement for drying.

4. Pangropéa

Regular maintenance ensures optimal performance and hygiene of your AIKE AK2030 hand dryer.

4.1 Pangropéa Filter HEPA

The hand dryer is equipped with a dual HEPA filter system. Periodically inspect and clean or replace the HEPA filters to maintain air quality and drying efficiency. Refer to the filter replacement indicator (if available) or replace every 6-12 months depending on usage.

Gambar 4: Dua-stage HEPA filtration system.

4.2 Water Collection Tank

The hand dryer features a water collection tank to prevent water from dripping onto the floor. Regularly check and empty the water collection tank to avoid overflow and maintain cleanliness. The tank is designed for easy removal and cleaning.

Figure 5: Water Collection Tank.

5. Cara ngungkulan

If you encounter issues with your AIKE AK2030 hand dryer, please refer to the following common troubleshooting steps:

• Henteu aya kakuatan: Pariksa naha kabel listrik parantos dipasang pageuh kana stop kontak anu tiasa dianggo. Pastikeun pemutus sirkuit henteu pegat.
• Not Activating: Ensure hands are placed correctly within the drying chamber to trigger the sensor. Clean the sensor area if it appears obstructed.
• Aliran hawa lemah: Check if the HEPA filters are clogged and require cleaning or replacement. Ensure air intake and exhaust vents are clear of obstructions.
• Noise kaleuleuwihan: Verify that the unit is securely mounted. If unusual noises persist, contact customer support.
• bocor cai: Check if the water collection tank is full or improperly seated. Empty and re-seat the tank correctly.

For persistent issues or problems not listed here, please contact AIKE customer support.

6. Spésifikasi

7. Garansi jeung Rojongan

The AIKE AK2030 hand dryer comes with a 2-taun jaminan kawates from the manufacturer. AIKE also provides lifetime technology support for this product. For warranty claims, technical assistance, or any product-related inquiries, please contact AIKE customer service through their official channels.