AIKE AK2030 HEPA Filtered Vertical Hand Dryer

1. Bubuka

Thank you for choosing the AIKE AK2030 HEPA Filtered Vertical Hand Dryer. This manual provides essential information for the safe installation, operation, and maintenance of your new hand dryer. Please read these instructions thoroughly before use and retain them for future reference.

The AIKE AK2030 is designed for efficient hand drying, featuring a dual HEPA filtration system and a powerful brushless motor for reliable performance and hygiene.

2. Émbaran Kasalametan

PERHATOSAN: Pikeun ngirangan résiko kahuruan, sengatan listrik, atanapi tatu, perhatoskeun hal-hal ieu:

• This appliance is UL Approved and operates at 110-120V, 14.16 amps, 60 Hz. Ensure the power supply matches these specifications.
• Pamasangan kedah dilakukeun ku tukang listrik anu mumpuni saluyu sareng sadaya kode listrik lokal sareng nasional.
• Pegatkeun sambungan listrik sateuacan ngalayanan atanapi ngabersihkeun unit.
• Ulah ngoperasikeun pangering leungeun nganggo kabel atanapi colokan anu rusak.
• Keep hands and foreign objects away from the air outlets during operation.
• produk ieu dimaksudkeun pikeun pamakéan komérsial.

3. Produk Langkungview

Fitur konci:

• Permanent Magnet Brushless Motor: Provides reliable and long-lasting performance.
• Dual HEPA Filter: Catches 99.9% of hazardous germs and particles, enhancing hygiene.
• Gancang garing: Dries hands in 10 seconds or less.
• UL disatujuan: Certified pikeun standar kaamanan.
• Flexible Power Connection: Includes a 55-inch wire with a 3-pin plug for simple outlet connection, also suitable for hard-wired installations.
• Tangki Pangumpul Cai: Integrated tank collects excess water, keeping the floor clean.

komponén:

The AIKE AK2030 hand dryer features a robust outer casing, internal air ducts, a powerful brushless motor, and a dual HEPA filtration system. A water collection tank is located at the base of the unit.

Gambar 3.1: Hareupeun view of the AIKE AK2030 Hand Dryer.

Figure 3.2: Illustration of the two-stage HEPA filtration system, designed to capture germs and particles.

Figure 3.3: The integrated water collection tank, located at the base of the unit, prevents water from dripping onto the floor.

4. Spésifikasi

Figure 4.1: Product dimensions of the AIKE AK2030 Hand Dryer.

5. Pamasangan

The AIKE AK2030 hand dryer is designed for wall mounting. It comes with a 55-inch wire and a 3-pin plug for direct connection to a standard electrical outlet. Alternatively, the unit can be hard-wired by a qualified electrician.

Léngkah-léngkah pamasangan:

1. Pilih Lokasi: Select a suitable wall location, ensuring adequate space around the unit for operation and maintenance. Consider ADA compliance if applicable.
2. Pamasangan: Securely mount the hand dryer to the wall using appropriate fasteners for the wall type. Refer to the included mounting template for precise hole placement.
3. Sambungan listrik:
   • Plug-in: If using the provided plug, ensure a compatible 110-120V outlet is available within reach of the 55-inch cord.
   • Hard-wire: For hard-wired installations, a qualified electrician must connect the unit directly to the building's electrical system, following all local electrical codes.
4. Cék ahir: After installation, ensure the unit is securely fastened and all electrical connections are correct and safe.

Gambar 5.1: Kelample of AIKE hand dryers installed in a commercial environment.

6. Operasi

Using the Hand Dryer:

1. Ngumbah leungeun nepi ka beresih.
2. Insert wet hands into the drying chamber from the top opening. The dryer will activate automatically.
3. Move hands slowly up and down within the drying chamber to ensure all surfaces are exposed to the airflow.
4. The powerful airflow will dry hands in approximately 7-10 seconds.
5. Remove hands once dry. The unit will automatically shut off.

Figure 6.1: Proper hand placement for effective drying.

Adjusting Settings (Hidden Switch):

The AIKE AK2030 features a hidden switch located at the bottom of the unit. This switch allows you to:

• Switch between high and low air speed settings.
• Turn the intelligent heat system on or off.

Access the switch by opening the small panel at the bottom. Adjust settings as desired for optimal comfort and energy efficiency.

7. Pangropéa

Regular maintenance ensures the longevity and hygienic performance of your AIKE AK2030 hand dryer.

Pangropéa Saringan HEPA:

• The dual HEPA filter should be inspected periodically and replaced as needed. The frequency depends on usage and environmental conditions.
• To replace the filter, disconnect power to the unit. Refer to the detailed instructions in the full service manual for accessing the filter compartment.
• Use only genuine AIKE replacement HEPA filters (Model AK2903).

Tangki Pangumpul Cai:

• The water collection tank should be emptied regularly to prevent overflow and maintain hygiene.
• The tank is typically located at the bottom of the unit and can be easily removed for emptying and cleaning.
• Clean the tank with mild soap and water, then dry thoroughly before reinserting.

Bersihan Luar:

• Ngusap permukaan luar kalayan lemes, damp lawon sareng pembersih anu hampang sareng henteu abrasif.
• Ulah nganggo bahan kimia anu kasar atanapi bahan abrasif anu tiasa ngaruksak lapisan akhir.

8. Cara ngungkulan

If your AIKE AK2030 hand dryer is not functioning correctly, please consult the following table before contacting support.

9. Garansi jeung Rojongan

The AIKE AK2030 Hand Dryer comes with a 2-taun jaminan kawates from the manufacturer, Zhejiang AIKE Appliances Co., Ltd. Additionally, lifetime technology support is provided.

For warranty claims, technical assistance, or further inquiries, please contact AIKE customer support. Refer to the official AIKE websitus atanapi dokuméntasi pameseran anjeun pikeun detil kontak.