D-Link DGS-3130-54TS 48-Port Gigabit Ethernet Switch Instruction Manual

1. Produk Langkungview

The D-Link DGS-3130-54TS is a Lite Layer 3 stackable managed Gigabit Ethernet switch designed for versatile network deployments. It features 48 Gigabit Ethernet ports, 2 10GBase-T ports, and 4 10G SFP+ ports for high-speed uplinks. This switch incorporates advanced Layer 2 and Layer 3 features to enhance network efficiency and includes robust redundancy features for reliable operation.

Gambar 1: Hareupeun view of the D-Link DGS-3130-54TS switch, showing 48 Gigabit Ethernet ports, 2 10GBase-T ports, and 4 10G SFP+ ports, along with status indicators and a console port.

2. Setup jeung Instalasi

2.1 Ngabongkar jeung Eusi Pakét

Verify the contents of your DGS-3130-54TS package. The box should contain the following items:

• DGS-3130-54TS Device
• Kabel listrik
• Kabel konsol
• Rék dipasang Kit
• Pitunjuk Instalasi Gancang (QIG)

If any items are missing or damaged, please contact your local D-Link reseller for assistance.

2.2 Instalasi fisik

The DGS-3130-54TS switch can be installed in a standard 19-inch equipment rack or placed on a desktop. Ensure the installation location provides adequate ventilation and is free from excessive heat, humidity, or electromagnetic interference.

Rék dipasang

1. Attach the provided mounting brackets to the sides of the switch using the screws included in the rack mounting kit.
2. Pasangkeun saklar kana rak nganggo sekrup rak anu cocog.

Sambungan Daya

Connect the supplied power cord to the power inlet on the rear panel of the switch and then to a suitable AC power outlet. The switch supports dual power inputs for redundancy.

2.3 Sambungan Jaringan Awal

To access the switch's management interface for initial configuration, connect a computer to the switch using the console cable or an Ethernet cable to one of the Gigabit Ethernet ports.

• Port konsol: Use the provided console cable to connect a terminal emulator on your computer to the switch's console port. Refer to the Quick Installation Guide for default console settings.
• Port Ethernet: Connect an Ethernet cable from your computer to any of the 10/100/1000BASE-T ports. The switch will typically obtain an IP address via DHCP or use a default static IP address for initial access.

3. Operasi

3.1 Konéktipitas Dasar

The DGS-3130-54TS provides 48 10/100/1000BASE-T ports for connecting network devices such as computers, servers, and other switches. The 2 10GBASE-T ports and 4 10G SFP+ ports are designed for high-bandwidth uplinks to core network devices or other switches, facilitating high-speed data transfer across your network.

3.2 Fitur canggih

This switch supports a range of advanced Layer 2 and Layer 3 features to optimize network performance and management:

• Layer 2 Features: Includes VLANs, Link Aggregation, Quality of Service (QoS), and Spanning Tree Protocol (802.1D/W/S) to prevent network loops.
• Layer 3 Features: Supports RIP/RIPng and OSPFv2/v3 for dynamic routing, allowing the switch to intelligently forward data packets across different subnets and determine the fastest routes.
• Physical Stacking: Up to 9 units can be physically stacked, providing 80 Gbps per device stacking bandwidth, which allows for flexible capacity expansion.
• Kipas pinter: The integrated smart fan system automatically adjusts its speed to maintain optimal operating temperatures, ensuring efficient cooling and reduced noise.

4. Pangropéa

4.1 Perawatan Umum

To ensure the longevity and optimal performance of your DGS-3130-54TS switch, keep it in a clean, dust-free environment with adequate airflow. Avoid blocking ventilation openings. Regularly inspect power cords and network cables for damage.

4.2 Apdet firmware

Periodically check the D-Link support website for the latest firmware updates. Firmware updates can provide new features, performance enhancements, and security patches. Follow the instructions provided with the firmware update package carefully.

4.3 Redundancy Features

The DGS-3130-54TS is equipped with several redundancy features to enhance reliability:

• Dual Power Inputs: Provides power redundancy, ensuring continuous operation even if one power source fails.
• Ethernet Ring Protection Switching (ERPS): Offers sub-50ms recovery time in ring topologies, minimizing network downtime.
• 6 kV Surge Protection: Built-in protection on all Gigabit Ethernet access ports safeguards the switch and connected devices from electrical surges caused by lightning or unstable power.

5. Cara ngungkulan

This section provides solutions to common issues you might encounter with your DGS-3130-54TS switch.

5.1 Lampu Indikator Teu Aya Daya

• Pastikeun kabel daya disambungkeun pageuh kana saklar sareng kana stop kontak anu tiasa dianggo.
• Pastikeun yén stop kontak listrik nuju nyayogikeun daya ku cara nguji sareng alat anu sanés.
• Pariksa kabel kakuatan pikeun karuksakan nu katingali.

5.2 Teu Aya Konéktivitas Jaringan

• Check the Ethernet cables connected to the switch and the end devices. Ensure they are properly seated and undamaged.
• Verify the link/activity LEDs on the switch ports. If they are off, there might be a cable issue or the connected device is not powered on.
• Confirm that the switch's IP address is correctly configured and that your computer is on the same subnet or has proper routing configured.
• If using advanced features like VLANs, ensure the port configurations are correct for the connected devices.

5.3 Performance jaringan slow

• Check for network loops using Spanning Tree Protocol status.
• Monitor port utilization to identify congested links.
• Ensure duplex settings match between the switch and connected devices.
• Verify that the latest firmware is installed on the switch.

For more detailed troubleshooting or persistent issues, refer to the comprehensive user manual available on the D-Link support website or contact D-Link technical support.

6. Spésifikasi Téknis

Gambar 2: D-Link DGS-3130-54TS switch with its physical dimensions: 17.32 inches length, 13.88 inches width, and 1.73 inches height.

7. Garansi jeung Rojongan

D-Link products are designed for reliability and performance. The DGS-3130-54TS switch comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official D-Link websitus.

For technical support, product documentation, firmware updates, and frequently asked questions, please visit the D-Link support portal:

D-Link Rojongan Websitus: us.dlink.com/support

D-Link offers expert support and aims to provide reliable solutions for your networking infrastructure.