TC Electronic JUNE-60 CHORUS Pedal Instruction Manual

1. Bubuka

The TC Electronic JUNE-60 CHORUS pedal is an authentic recreation of the legendary synthesizer chorus from the 1980s. This pedal features a simple 2-button interface for intuitive modulation tone and utilizes all-analog BBD (Bucket Brigade Delay) circuitry to deliver its classic sound. Designed for guitarists seeking vintage chorus effects, the JUNE-60 CHORUS also includes True Bypass for ultimate signal integrity.

TC Electronic JUNE-60 CHORUS Pedal, top-down view

Gambar 1.1: Top-handap view of the TC Electronic JUNE-60 CHORUS Pedal, showcasing its two yellow buttons and True Bypass footswitch.

2. Parentah Kasalametan penting

Baca parentah ieu kalawan saksama sateuacan ngoperasikeun alat ieu.
Tetep parentah ieu pikeun rujukan hareup.
Heed all warnings on the product and in the instructions.
Ulah make alat ieu deukeut cai atawa Uap.
Ngabersihan ngan ku kaén garing.
Ulah meungpeuk sagala bukaan ventilasi. Pasang saluyu sareng parentah produsén.
Entong dipasang di deukeut sumber panas sapertos radiator, register panas, kompor, atanapi aparat sanésna (kalebet ampLiifiers) anu ngahasilkeun panas.
Ngan anggo kantétan/aksésori anu ditunjuk ku produsén.
Rujuk sadayana jasa ka tanaga jasa anu mumpuni. Diperlukeun ngalayanan nalika aparatur ruksak ku cara naon waé, sapertos kabel catu daya atanapi colokan rusak, cairan tumpah atanapi barang murag kana aparatur, aparatur parantos kakeunaan hujan atanapi lembab, henteu beroperasi normal. , atawa geus turun.

3. Setélan

3.1 Sambungan Daya

The JUNE-60 CHORUS pedal can be powered by a 9V battery or an external 9V DC power supply (not included). Ensure the power supply provides at least 100 mA. Connect the power supply to the 9V DC input jack on the rear of the pedal.

Daya Batré: To install a 9V battery, open the battery compartment on the bottom of the pedal. Connect the battery to the clip and place it inside the compartment.
Daya éksternal: Use a regulated 9V DC power supply with a center-negative plug, providing a minimum of 100 mA.

TC Electronic JUNE-60 CHORUS Pedal rear panel with input, output, and power jacks

Figure 3.1: Rear panel of the JUNE-60 CHORUS Pedal, showing the INPUT (MONO), 9V DC power input (100 mA), and OUTPUT (MONO/STEREO) jacks.

3.2 Panyambung Audio

Sambungkeun alat Anjeun (misalna gitar) ka INPUT (MONO) jack using a standard 1/4-inch instrument cable. Connect the OUTPUT (MONO/STEREO) jack ka anjeun amplifier or the next pedal in your signal chain. For stereo operation, use a Y-cable or two separate cables from the output to two amplampu latar atawa alat input stereo.

Mono Setup: Connect a single 1/4-inch cable from the OUTPUT jack to your amppangagung.
Setup stereo: The JUNE-60 CHORUS supports stereo output. Consult your amplifier or audio interface manual for proper stereo input connections.

4. Operasi

The JUNE-60 CHORUS pedal features a straightforward 2-button interface, replicating the classic chorus modes of its inspiration. The pedal is activated by the True Bypass footswitch.

4.1 Ngalibatkeun Éfék

Pencét éta BYPASS BENER footswitch to toggle the effect on or off. When the effect is active, the LED indicator will illuminate.

4.2 Chorus Modes (Buttons I & II)

The two yellow buttons, labeled I jeung II, select different chorus modes. These buttons can be used individually or simultaneously to achieve distinct modulation characteristics.

Tombol I: Engages Chorus Mode I, offering a specific modulation rate and depth.
Tombol II: Engages Chorus Mode II, offering an alternative modulation rate and depth.
Buttons I & II (Simultaneously): Pressing both buttons together activates a combined chorus mode, often resulting in a richer, more complex modulation. Experiment with these combinations to find your desired sound.

TC Electronic JUNE-60 CHORUS Pedal top view showing buttons I and II

Gambar 4.1: Top view of the JUNE-60 CHORUS Pedal, highlighting the two yellow buttons (I and II) for chorus mode selection.

4.3 Mono/Stereo Switch

A small switch labeled MONO / STEREO is located near the chorus mode buttons. This switch determines the output configuration of the pedal.

BUN: Pikeun single amppangaturan lifier.
STEREO: For dual amplifier or stereo input setups, providing a wider, more immersive chorus effect.

5. Pangropéa

5.1 beberesih

Clean the pedal's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components.

5.2 Ngagantian batré

If using battery power, replace the 9V battery when the effect LED dims or the pedal's performance degrades. To replace, open the battery compartment on the bottom of the unit, disconnect the old battery, and connect a new one, ensuring correct polarity.

5.3 Panyimpenan

When not in use for extended periods, disconnect the power supply and remove the battery to prevent leakage. Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures.

6. Cara ngungkulan

Masalah	Mungkin Cukang lantaranana	Solusi
Teu aya sora nalika pedal dipencet.	No power, incorrect cable connection, faulty cable.	Check power supply connection and ensure it meets 9V DC, 100mA specifications. Replace battery if using battery power. Pastikeun sadaya kabel audio disambungkeun sacara aman. Test cables with another device to ensure they are not faulty.
Sora lemah atanapi menyimpang.	Low battery, incorrect input level from instrument.	Replace battery or use external power supply. Ensure instrument output level is appropriate for pedal input.
Chorus effect is not noticeable.	Incorrect chorus mode selected, subtle setting.	Experiment with pressing Button I, Button II, or both simultaneously. Ensure the MONO/STEREO switch is set correctly for your setup.
Pedal does not power on with adapter.	Insufficient current from power adapter.	Verify your power adapter provides at least 100 mA at 9V DC. Some adapters may provide 9V but insufficient current.

7. Spésifikasi

Fitur	Rincian
Modél	JUNE-60 CHORUS
Jenis Jenis	Chorus
Sirkuit	All-analog BBD (Bucket Brigade Delay)
Bypass	Bypass leres
Kadali	2 x Chorus Mode Buttons (I, II), MONO/STEREO Switch, True Bypass Footswitch
Panyambung Input	1 x 1/4" TS, unbalanced (Mono)
Konektor Kaluaran	1 x 1/4" TS, unbalanced (Mono/Stereo)
Input kakuatan	Standard 9V DC, center-negative, >100 mA (Power supply not included)
Pilihan Batre	Batré 9V (teu kalebet)
Ukuran (H x W x D)	Kira-kira 13.7 x 8.6 x 5.6 inci
Beurat	8 ons (0.5 lbs)
Bahan Awak	Plastik, Logam

TC Electronic JUNE-60 CHORUS Pedal bottom label with regulatory information

Figure 7.1: Bottom label of the JUNE-60 CHORUS Pedal, displaying model and regulatory compliance information.

8. Garansi jeung Rojongan

8.1 Émbaran jaminan

TC Electronic products are designed and manufactured to the highest standards. For detailed warranty terms and conditions, please refer to the official TC Electronic websitus atanapi kartu garansi anu kalebet sareng produk anjeun. Simpen bukti pameseran anjeun pikeun klaim garansi.

8.2 Rojongan Palanggan

Should you encounter any issues or have questions regarding your JUNE-60 CHORUS pedal, please visit the official TC Electronic support page for FAQs, troubleshooting guides, and contact information. You can find support resources at the Dukungan Éléktronik TC Websitus.