BOYA RX8PRO

BOYA RX8Pro Professional Wireless Dual Receiver User Manual

Model: RX8PRO

1. Bubuka

The BOYA RX8Pro is a professional UHF dual-channel wireless receiver designed for use with DSLR cameras, mirrorless cameras, and video cameras. It offers reliable audio reception for various professional recording scenarios, including interviews and field recordings. This receiver is built with an all-metal construction for durability and features an intuitive interface for ease of use.

2. Produk Langkungview

BOYA RX8Pro Wireless Dual Receiver

Gambar 1: Hareupeun view of the BOYA RX8Pro Wireless Dual Receiver. It features two flexible antennas, a display screen showing channel information, and control buttons. The BOYA logo is visible at the bottom.

Fitur konci:

  • Dual-channel receiver for simultaneous operation of two transmitters.
  • 48 selectable UHF channels for interference-free operation.
  • 3.5mm locking mini-jack output for secure connection to cameras.
  • 3.5mm headphone output for real-time audio monitoring.
  • All-metal construction for robust durability.
  • LCD display for channel and battery status indication.
  • Didukung ku dua aki AA.

3. Setup Guide

3.1. Pamasangan batré

  1. Locate the battery compartment on the rear of the RX8Pro receiver.
  2. Geser muka panutup batré.
  3. Pasangkeun dua batré AA, pastikeun polaritasna bener (+/-).
  4. Tutup panutup batre aman.

3.2. Masang Panarima

The RX8Pro includes a detachable shoemount adapter for easy attachment to a camera's hot shoe or cold shoe mount.

  1. Attach the shoemount adapter to the bottom of the receiver.
  2. Slide the receiver with the shoemount into your camera's hot shoe.
  3. Tighten the locking wheel on the shoemount to secure the receiver.
  4. Alternatively, use the belt clip for attaching to clothing or a belt.

3.3. Connecting to Your Camera

Use the provided cables to connect the receiver to your recording device.

  • For DSLR/Mirrorless Cameras: Use the locking 3.5mm to 3.5mm cable. Connect one end to the RX8Pro's "OUTPUT" jack and the other end to your camera's microphone input.
  • For Professional Camcorders/Mixers: Use the locking 3.5mm mini-jack to XLR cable. Connect the 3.5mm end to the RX8Pro's "OUTPUT" jack and the XLR end to your device's XLR input.

4. Parentah Operasi

4.1. Powering on / Pareum

Locate the power switch on the side panel of the receiver. Slide it to the "ON" position to power on the device. Slide it to "OFF" to power down.

4.2. Pamilihan Saluran

The RX8Pro features 48 selectable UHF channels. Ensure the receiver and transmitter (sold separately) are set to the same channel to establish a connection.

  1. Press the "SET" button to enter the channel selection mode.
  2. Use the "+" or "-" buttons to cycle through available channels.
  3. Press "SET" again to confirm your selection.
  4. Observe the "LINK" indicator on the receiver; it should illuminate when a successful connection with a transmitter is established.

4.3. Pemantauan Audio

Connect headphones to the 3.5mm headphone output jack on the receiver to monitor audio in real-time. This allows you to verify audio quality and levels during recording.

4.4. Output Level Adjustment

Adjust the output level of the receiver to match the input sensitivity of your camera or recording device. Refer to your camera's manual for optimal audio input settings.

5. Pangropéa

  • Keep the receiver dry. Do not expose it to water or excessive humidity.
  • Bersihkeun alat ku kaen anu lemes sareng garing. Hindarkeun ngagunakeun bahan kimia anu kasar atanapi pembersih abrasive.
  • Cabut batré upami alat moal dianggo kanggo waktos anu panjang pikeun nyegah bocor.
  • Simpen panarima dina tiis, tempat garing jauh ti sinar panonpoé langsung sarta suhu ekstrim.

6. Cara ngungkulan

MasalahMungkin Cukang lantarananaSolusi
Taya kaluaran audio
  • Panarima teu dihurungkeun.
  • batré low.
  • Transmitter not powered on or out of range.
  • Pilihan saluran anu salah.
  • Kabel teu nyambung leres.
  • Camera input level too low.
  • Pastikeun switch kakuatan ON.
  • Ganti batré.
  • Power on transmitter, ensure it's within operating range.
  • Verify receiver and transmitter are on the same channel.
  • Pariksa sadaya sambungan kabel.
  • Adjust camera's audio input level.
Statis atanapi gangguan
  • Gangguan tina alat nirkabel anu sanés.
  • Receiver/transmitter too far apart.
  • Halangan antara unit.
  • Ganti ka saluran anu béda.
  • Reduce distance between receiver and transmitter.
  • Pastikeun garis pandang anu jelas.
tampilan LCD teu jalan
  • batré low.
  • Gagalna alat.
  • Ganti batré.
  • Kontak rojongan customer lamun masalah persists.

7. Spésifikasi

merekBOYA
Nomer modélRX8PRO
Dimensi produk2.6 x 1.6 x 1 inci
Item Beurat9.1 ons
Téhnologi konektipitasXLR
Tipe PanyambungXLR Connector, 3.5mm Jack
Mode Kaluaran AudioStereo
Konfigurasi Saluran Sakuliling Sora2 Saluran
WarnaHideung
ProdusénBoya
Tanggal Kahiji Sadia3 Juni 2019

8. Naon dina Box

  • 1 x RX8Pro Professional Wireless Dual Receiver
  • 1 x Sabuk Klip
  • 1 x Locking 3.5mm Mini-Jack to XLR Cable
  • 1 x Locking 3.5mm to 3.5mm Cable
  • 1 x Detachable Shoemount Adapter
  • Manual pangguna (dokumén ieu)

9. Garansi jeung Rojongan

For warranty information and technical support, please refer to the official BOYA websitus atanapi ngahubungan distributor lokal Anjeun. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.

BOYA Official Websitus: www.boya-mic.com

© 2024 BOYA. Sadaya hak disimpen.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.