ULANZI ST-06S Camera Hot Shoe Phone Holder Instruction Manual

1. Bubuka

The ULANZI ST-06S is a versatile phone holder designed for photographers and videographers. It allows you to securely mount your smartphone to a camera's hot shoe or a tripod, providing flexible positioning for various shooting scenarios. This manual provides detailed instructions for the proper setup, operation, and care of your ST-06S phone holder.

2. Fitur Produk

• Adjustable Z-Axis Angle: Allows for pitch angle adjustments without a separate ball head.
• Pilihan Pasang Serbaguna: Features a standard 1/4" screw hole and two cold shoe mounts for accessories.
• Enhanced Safety & Ease of Use: Push-and-lock mechanism with thick, non-slip silicone pads and reinforced fixing gear.
• Rotasi 360°: Quickly switch between portrait and landscape modes.
• Compact & Compatible: Lightweight (51g) and compatible with smartphones 2.36 to 3.54 inches wide.

3. Eusi Paket

• 1 x ULANZI ST-06S Camera Hot Shoe Phone Holder

4. Parentah Setup

4.1 Attaching to a Camera Hot Shoe

1. Panggihan dudukan hot shoe dina kaméra anjeun.
2. Slide the base of the ULANZI ST-06S into the camera's hot shoe.
3. Tighten the locking knob at the base of the phone holder to secure it firmly in place.

Figure 4.1: Phone holder attached to a DSLR camera.

4.2 Attaching to a Tripod or Monopod

1. Locate the 1/4" screw hole at the bottom of the ULANZI ST-06S.
2. Screw the phone holder onto the 1/4" screw of your tripod, monopod, or selfie stick until secure.

Figure 4.2: Wide compatibility with various mounting options.

4.3 Nyelapkeun Smartphone Anjeun

1. Press the release button on the side of the phone holder to expand the clamp.
2. Carefully place your smartphone between the silicone pads.
3. Release the button to allow the clamp to securely grip your phone. Ensure the phone is centered and held firmly.

Figure 4.3: Close-up of the phone clamp mékanisme.

5. Parentah Operasi

5.1 Adjusting the Z-Axis Angle

The ST-06S features an adjustable Z-axis angle for pitch adjustments. Loosen the knob located below the phone clamp to adjust the tilt angle. Once the desired angle is achieved, tighten the knob firmly to prevent movement.

Figure 5.1: Adjusting the tilt angle.

5.2 Rotasi 360°

The phone holder can rotate 360 degrees, allowing for quick switching between portrait and landscape orientations. Simply rotate the phone clamp to your preferred orientation.

Figure 5.2: 360-degree rotation for orientation changes.

5.3 Ngagunakeun Dudukan Sepatu Tiis

The ST-06S is equipped with two cold shoe mounts on top of the phone clamp. These can be used to attach external accessories such as microphones or LED lights. Slide your accessory into the cold shoe mount until it clicks into place or is secured by its own locking mechanism.

Gambar 5.3: Kelamples of using cold shoe mounts with accessories.

6. Pangropéa

To ensure the longevity and optimal performance of your ULANZI ST-06S phone holder, follow these maintenance guidelines:

• beberesih: Wipe the holder with a soft, dry cloth. For stubborn dirt, a slightly damp lawon bisa dipaké, dituturkeun ku drying langsung. Hindarkeun bahan kimia anu kasar atanapi pembersih abrasive.
• Panyimpenan: Store the phone holder in a cool, dry place away from direct sunlight and extreme temperatures.
• Pamariksaan: Periodically check all moving parts and screws for tightness. Ensure the silicone pads are free from debris and damage to maintain a secure grip.

7. Cara ngungkulan

If you encounter any issues with your ULANZI ST-06S, refer to the following common problems and solutions:

8. Spésifikasi

9. Garansi jeung Rojongan

For information regarding warranty coverage, technical support, or replacement parts, please refer to the official ULANZI websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Sarat jaminan husus bisa rupa-rupa dumasar wewengkon sarta pangecér.