APIELE 10 Amp 19mm Latching Push Button Switch User Manual

Bubuka

This user manual provides detailed instructions for the installation, operation, and maintenance of the APIELE 10 Amp 19mm Latching Push Button Switch. This high-quality metal switch is designed for various applications, including automotive, motorcycle modification, and control equipment.

Émbaran Kasalametan

• Ensure power is disconnected before installation or maintenance to prevent electrical shock.
• Verifikasi voltage and current ratings match your application to avoid damage to the switch or connected devices.
• Do not exceed the specified 10 Amp current rating or 12V operating voltage.
• Handle with care to avoid damaging internal components.
• Upami anjeun teu yakin kana léngkah-léngkah pamasangan naon waé, konsultasi ka tukang listrik anu mumpuni.

Produk Leuwihview

The APIELE 10 Amp 19mm Latching Push Button Switch features a durable metal construction and an integrated LED ring. It is designed for reliable performance in various environments.

Fitur konci:

• Latching Operation: Push once for ON, push again for OFF.
• Peunteun ayeuna luhur: 10 Amps.
• Lampu LED: 12V LED ring for status indication.
• Konstruksi awét: High-quality metal material.
• IP65 waterproof: Suitable for wet or dusty environments.
• Umur panjang: Electrical life of 200,000 times, mechanical life of 1,000,000 cycles.

komponén:

The product includes the push button switch and a connector for wiring.

• 1 x Latching Push Button Switch
• 1 x Connector with pre-attached wires

Figure 1: APIELE 10 Amp 19mm Latching Push Button Switch (Red LED, Silver Stainless Steel).

Figure 2: Various angles of the APIELE push button switch, showcasing desainna anu kuat.

Figure 3: Comparison highlighting the larger press part and stronger contact terminals of the new design (right) compared to the old design (left).

Figure 4: Illustration of the switch's durability, rated for 200,000 press times and 40,000 hours of lamp hirup.

Figure 5: Visual representation of the IP65 waterproof protection, indicating suitability for wet or dusty environments.

spésifikasi

Figure 6: Detailed technical specifications and dimensions of the switch.

Setup sareng Instalasi

Follow these steps for proper installation of your APIELE Latching Push Button Switch.

Diagram Wiring:

The switch comes with a pre-wired connector for ease of installation. Refer to the diagram below for pin assignments:

• Kawat beureum: Positive LED Pin "+"
• Kawat Hideung: Negative LED Pin "-"
• Kawat Biru: Normal Open Pin

Figure 7: Wiring diagram showing the function of each colored wire on the connector.

Léngkah-léngkah pamasangan:

1. Nyiapkeun Lubang Pasang: Drill a 19mm (3/4 inch) diameter hole in the desired mounting surface.
2. Insert Switch: Insert the switch body into the prepared hole from the front.
3. Aman sareng Nut: Thread the securing nut onto the switch body from the back and tighten it to hold the switch firmly in place.
4. Sambungkeun Wiring: Attach the provided connector to the switch terminals. Ensure correct polarity for the LED function.

Figure 8: Visual guide for the installation process of the push button switch.

Parentah Operasi

The APIELE Latching Push Button Switch operates with a simple ON-OFF mechanism.

• To turn on the connected device, press the button once. The LED ring will illuminate, indicating the switch is in the ON state.
• To turn off the connected device, press the button again. The LED ring will turn off, indicating the switch is in the OFF state.

Aplikasi:

This versatile switch is suitable for a wide range of applications, including but not limited to:

• Automobile and motorcycle modifications
• Control equipment switch modifications
• Doorbell buttons
• SOS buttons
• Elevator buttons
• Parabot rumah tangga

Gambar 9: Kelamples of common applications for the APIELE push button switch, including doorbell, car, and elevator buttons.

Pangropéa

The APIELE Latching Push Button Switch is designed for minimal maintenance due to its durable construction and IP65 waterproof rating.

• beberesih: Wipe the switch surface with a soft, damp lawon. Hindarkeun nganggo pembersih abrasive atanapi pangleyur anu tiasa ngaruksak finish atanapi komponén internal.
• Pamariksaan: Pariksa sambungan kabel sacara berkala pikeun mastikeun éta aman sareng bébas tina korosi.
• Perlindungan Lingkungan: While waterproof, prolonged submersion is not recommended. Ensure the mounting area is properly sealed if exposed to extreme moisture.

Pamérésan masalah

Garansi sareng Rojongan

APIELE products are manufactured to high standards. For any issues or support inquiries, please contact APIELE Electric directly through their official channels or the retailer from whom the product was purchased.

Nganjang ka APIELE Store on Amazon kanggo inpormasi lengkep sareng pilihan kontak.