DAYBETTER DWF0362CNOV

DAYBETTER Wi-Fi LED Strip Light Controller with 24-Key Remote Manual

Model: DWF0362CNOV

Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your DAYBETTER Wi-Fi LED Strip Light Controller with 24-Key Remote. Please read this guide thoroughly before use to ensure proper functionality and safety.

Produk Leuwihview

Eusi pakét

  • 1 x 24-key remote controller
  • 1 x Controller box with two 4-pin ports
  • Wi-Fi LED strip light (sold separately or as part of a kit)
DAYBETTER Wi-Fi LED Strip Light Controller, 24-Key Remote, and LED Strips

Image: Contents of the DAYBETTER Wi-Fi LED Strip Light Controller package, showing the controller box, 24-key remote, and coiled LED strip lights.

Fitur konci

  • 24-Konci Jauh Controller: Offers 16 static colors, dimming, brightening, and various control modes. Compatible with 5050, 3528, and 2835 LED light strips.
  • Two-in-One Connector: The controller box features two 4-pin ports, allowing control of two light strips simultaneously or a single strip as needed.
  • Gampang dianggo: Designed for 4-pin LED strips with a DC 12V voltage asupan.
  • Kadali Jauh Infrabeureum: Operates within approximately 30 feet. Requires direct line-of-sight to the IR sensor on the controller box.
  • Arus maksimum: Ngarojong arus maksimum 6A.

Guide Setup

  1. Nyiapkeun Kontrol Jauh:

    Before first use, locate the clear plastic tab protruding from the battery compartment of the 24-key remote control. Gently pull this tab out to activate the battery.

    Hand pulling plastic tab from the remote control

    Image: A hand removing the protective plastic tab from the battery compartment of the 24-key remote control.

  2. Connect LED Strips to Controller:

    Align the 4-pin connector of your LED strip(s) with one of the 4-pin output ports on the controller box. Ensure the arrow on the strip connector aligns with the arrow on the controller port for correct polarity. The controller supports up to two LED strips.

    Close-up of LED strip connector showing arrow alignment

    Gambar: A close-up view illustrating the 'Arrow to Arrow' connection method for the LED strip and controller connector.

  3. Sambungkeun Adaptor Daya:

    Insert the DC 12V power adapter (not included) into the DC Port on the controller box. Ensure the power adapter is suitable for 12V DC input.

    Close-up of controller showing DC Port and IR Sensor

    Gambar: A lengkep view of the controller box, highlighting the DC power input port and the infrared (IR) sensor.

  4. Position IR Sensor:

    Ensure the IR sensor on the controller box is exposed and has a clear line of sight to where you will be using the remote control. Obstructions can block the signal.

  5. Tuya Smart App Installation (Optional):

    For Wi-Fi control, download the Tuya Smart app. Scan the QR code located on the controller box or visit smartapp.tuya.com/tuyasmart pikeun ngaunduh aplikasi. Turutan pitunjuk dina aplikasi pikeun masangkeun alat anjeun.

    Controller box with Tuya Smart app QR code

    Image: The controller box displaying a QR code for downloading the Tuya Smart application.

Parentah Operasi

Using the 24-Key Remote Control

Point the remote directly at the IR sensor on the controller box for optimal response. The remote allows you to control various aspects of your LED strip lights:

Diagram of 24-key remote control buttons and their functions

Image: A diagram illustrating the layout and function of each button on the 24-key remote control.

  1. LED Brightness Adjustment (Up): Increases the brightness of the LED lights.
  2. LED Brightness Adjustment (Down): Decreases the brightness of the LED lights.
  3. Tombol OFF: Turns off the LED lights.
  4. Tombol ON: Turns on the LED lights.
  5. LED Color Buttons (16 Colors): Select from static colors including Red, Green, Blue, White, Orange, Pea Green, Dark Blue, Dark Yellow, Cyan, Brown, Yellow, Light Blue, Pink, Straw Yellow, Sky Blue, and Purple.
  6. Tombol Flash: Activates or deactivates the flash mode.
  7. Tombol Strobe: Initiates a fast color change effect, cycling through LED colors every 3 seconds.
  8. Fade Button: Creates a smooth transition, fading out the current LED color and fading in the next LED color every 3 seconds.
  9. Smooth Button: Provides a rapid, smooth color transition, fading out the current LED color and fading in the next LED color every 0.5 seconds.

Ngagunakeun Tuya Smart App

Once paired, the Tuya Smart app provides advanced control over your LED strip lights, including custom color selection, scene modes, scheduling, and voice control integration (if supported by your smart home ecosystem). Refer to the Tuya Smart app's help section for detailed instructions on its features.

Pangropéa

  • beberesih: Use a dry, soft cloth to wipe the controller and remote control. Do not use liquid cleaners or abrasive materials.
  • Panyimpenan: Simpen alat dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim upami henteu dianggo kanggo waktos anu lami.
  • Ngagantian batré: If the remote control's range decreases or it stops responding, replace the battery (type not specified, typically CR2025 or similar button cell).

Pamérésan masalah

MasalahMungkin Cukang lantarananaSolusi
Lampu teu hurung.No power, incorrect connection, remote battery dead.Check power adapter connection. Ensure 'Arrow to Arrow' connection for LED strips. Replace remote battery.
Kadali jauh teu ngabales.IR sensor blocked, remote battery dead, out of range.Ensure clear line of sight to IR sensor. Replace remote battery. Operate within 30 feet of the controller.
Warna nu salah atawa kedip-kedip.Loose connection, incorrect polarity.Check all 4-pin connections for tightness and correct 'Arrow to Arrow' alignment.
Wi-Fi app cannot connect.Incorrect Wi-Fi password, router issues, device not in pairing mode.Ensure correct 2.4GHz Wi-Fi network and password. Restart router. Follow Tuya Smart app pairing instructions carefully.

spésifikasi

  • merek: DAYBETTER
  • Jumlah modél: DWF0362CNOV
  • warna: Wi-Fi 24key Controller
  • Voltage: 12 volt DC
  • Wattage: 72 watt (Max)
  • Arus maksimum: 6A
  • Métode kontrol: Remote Control (Infrared), Wi-Fi (Tuya Smart App)
  • Téknologi konektipitas: Infrabeureum, Wi-Fi
  • Pamakéan Indoor/Outdoor: jero rohangan
  • Tipe Bahan: palastik
  • Beurat barang: 2.4 ons

Garansi sareng Rojongan

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official DAYBETTER website. If you encounter any issues not covered in this manual, please contact DAYBETTER customer service for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.