Bubuka
Thank you for choosing the Spigen NeoFlex Screen Protector for your Samsung Galaxy S21 Plus. This manual provides detailed instructions for proper installation and care to ensure optimal performance and protection for your device's screen. The NeoFlex protector is designed for edge-to-edge coverage and is compatible with all Spigen cases.
Kasaluyuan
This Spigen NeoFlex Screen Protector is specifically designed for the Samsung Galaxy S21 Plus (6.7-inch display). It is not compatible with the Samsung Galaxy S21 Ultra (6.8-inch) or the standard Samsung Galaxy S21 (6.2-inch).
Image: Visual guide illustrating compatibility with the 6.7-inch Galaxy S21 Plus, and incompatibility with 6.8-inch S21 Ultra and 6.2-inch S21.
Eusi pakét
Your Spigen NeoFlex Screen Protector package includes:
- 2 x Spigen NeoFlex Screen Protectors
- Installation Kit (typically includes a spray bottle, squeegee, microfiber cloth, and dust removal stickers)
- Manual Pitunjuk (dokumén ieu)
Setup sareng Instalasi
The NeoFlex screen protector uses a wet installation method for a bubble-free application and zero lifting. For best results, perform the installation in a dust-free environment.
Persiapan
- Bersihkeun Alat Anjeun: Thoroughly clean your Samsung Galaxy S21 Plus screen using the provided microfiber cloth to remove all dust, smudges, and fingerprints. Ensure the screen is completely dry.
- Remove Pre-installed Film: Before applying the NeoFlex protector, ensure any pre-installed protective films on the NeoFlex itself are removed.
Image: Illustration of removing the pre-installed film from the screen protector.
Wet Installation Steps
- Spray the Protector: Lightly spray the adhesive side of the NeoFlex screen protector with the provided solution. Ensure the entire surface is evenly misted.
- Align and Apply: Carefully align the wet screen protector with your phone's screen, ensuring the cutouts for the camera and sensors match perfectly. Gently lay it down onto the screen.
- Squeegee Out Bubbles: Using the provided squeegee, gently push out any air bubbles and excess liquid from the center towards the edges of the screen. Apply light, even pressure.
- Ngidinan ka garing: Allow the screen protector to dry completely. This may take several hours. Avoid touching or using your phone excessively during this period to allow the adhesive to set properly. Small bubbles or haziness may disappear over 12-24 hours as the solution evaporates.
Image: Demonstrating the wet application process, spraying the flexible film.
Tip: For a visual guide, Spigen recommends watching their official tutorial video. While no video is provided in this manual, searching for "Spigen NeoFlex S21 Plus installation video" on platforms like YouTube can provide helpful visual instructions.
Fitur produk
- Protéksi Sapopoé: Protects the screen from daily scratches and minor abrasions.
- High Touch Sensitivity: Maintains the original touch response of your device, ensuring smooth and accurate interactions.
- Tampilan Crystal Clear: Preserves the original clarity and vibrant colors of your screen without glares or rainbow effects.
- Desain Friendly Kasus: Engineered to fit seamlessly with all Spigen cases, preventing lifting or peeling at the edges.
Image: Depiction of the screen protector offering daily scratch protection.
Image: Illustrating the undisturbed and quick touch response of the screen protector.
Image: A phone screen showing a clear, untainted image, demonstrating the protector's clarity.
Image: Demonstrating the flawless fit of the screen protector with Spigen cases.
Pangropéa
To maintain the clarity and effectiveness of your Spigen NeoFlex Screen Protector:
- Clean the screen regularly with a soft, lint-free cloth.
- Pikeun smudges nekad, enteng dampen lawon kalawan cai atawa cleaner layar husus dirancang pikeun éléktronika.
- Avoid using harsh chemicals, abrasive materials, or excessive force when cleaning, as this may damage the protector.
Pamérésan masalah
| Masalah | Solusi |
|---|---|
| Gelembung sanggeus instalasi | Small bubbles are common immediately after wet installation. Most will disappear naturally within 12-24 hours as the solution dries. For larger bubbles, gently push them towards the nearest edge with the squeegee. |
| Edges lifting | Ensure sufficient drying time after installation. If edges lift, gently re-spray the affected area, press down with the squeegee, and allow more time to dry. Ensure the protector is correctly aligned and not overlapping with a phone case. |
| Dust under the protector | This usually occurs during installation in a dusty environment. If dust is present, it's best to remove the protector, clean the screen thoroughly again, and reapply a new protector from the pack. |
| Reduced touch sensitivity | Ensure the protector is fully adhered and dry. If the issue persists, check your phone's settings for "Touch sensitivity" or "Screen protector mode" and enable it if available. |
spésifikasi
| Fitur | Rincian |
|---|---|
| merek | Spigen |
| Nomer modél | AFL02536 |
| Alat nu cocog | Samsung Galaxy S21+ 5G (6.7 Inches) |
| Bahan | Plastic (Flexible Film) |
| Item Teu karasa | 9H (Note: This typically refers to pencil hardness, indicating scratch resistance for flexible films.) |
| Fitur husus | Scratch Resistant, Case Friendly, Wet Installation, Bubble-free application, Zero lifting, Clear screen, No glares or rainbow effects |
| Jumlah Unit | 2.0 Count (2 Protectors) |
| Dimensi produk | 6.14 "L x 2.76" W |
Garansi sareng Rojongan
Spigen products are designed for quality and durability. For warranty information, product support, or to contact customer service, please visit the official Spigen websitus atanapi tingal wincik kontak disadiakeun kalawan dokuméntasi pameseran Anjeun.
Anjeun oge bisa nganjang ka Spigen Store on Amazon pikeun émbaran leuwih produk jeung sumber rojongan.