1. Bubuka
This manual provides instructions for the installation, operation, and maintenance of your Sena Parani M10 Bluetooth Motorcycle Headset. The Parani M10 allows for seamless communication and entertainment while riding, featuring Bluetooth intercom capabilities and smartphone connectivity for music, GPS, and calls. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. Eusi Paket
The Parani M10 package typically includes the following components:
- Parani M10 Main Unit
- Mikropon boom kabel
- Speakers (pair)
- Helm Clamp Kit
- Kabel Ngecas USB
- Speaker Pads
- Hook jeung Loop Fasteners pikeun Speaker
- Manual pangguna (dokumén ieu)

Figure 2.1: Parani M10 complete kit showing the main unit, wired microphone, and speakers.
3. Produk Langkungview
Familiarize yourself with the main unit's components and controls.

Figure 3.1: Parani M10 Main Unit Controls and Ports.
- Jog Dial: Used for volume control, menu navigation, and various functions.
- Tombol multi-fungsi: Primary button for power, pairing, and call management.
- Layar LCD: Shows battery status, volume level, intercom pairing status, and other operational information.
- DC Power Charging & Firmware Upgrade Port: For charging the device and updating its firmware.
- Speakers and Microphone Port: Connection point for the wired speakers and microphone.
4. Setup jeung Instalasi
The Parani M10 is designed for easy installation on most motorcycle helmets.
4.1 Attaching the Main Unit to the Helmet
- Pilih lokasi anu cocog di sisi kénca helm anjeun pikeun clamp kit.
- Leupaskeun sekrup dina panutup helmamp kit and slide it between the helmet shell and the inner padding. Ensure it is securely fastened.
- Slide the Parani M10 main unit onto the clamp nepi ka ngaklik kana tempatna.

Figure 4.1: Parani M10 unit installed on a helmet.
4.2 Masang Spiker sareng Mikropon
- Attach the hook and loop fasteners to the inside of your helmet, aligning them with your ears.
- Press the speakers onto the fasteners. Ensure the speakers are positioned directly over your ears for optimal audio quality.
- Attach the wired boom microphone to the inside of the helmet, positioning it close to your mouth but not directly in front of it to avoid wind noise.
- Route the speaker and microphone wires neatly under the helmet padding to the main unit's port.
- Connect the speaker/microphone cable to the corresponding port on the Parani M10 main unit.
4.3 Ngecas Alat
Before first use, fully charge the Parani M10. Connect the USB charging cable to the DC Power Charging Port on the main unit and to a USB power source. The LCD display will indicate charging status.
5. Parentah Operasi
5.1 Daya Hurung/Pareuman
- Daya Hurung: Pencét jeung tahan Tombol Multi-fungsi pikeun 1 detik.
- Pareum listrik: Pencet sareng tahan Tombol Multi-fungsi salami 5 detik.
5.2 Volume Control
Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume. The LCD display will show the current volume level.

Figure 5.1: LCD display showing pairing status and volume.
5.3 Pamasangan smartphone
- With the M10 powered off, press and hold the Multi-function Button for 5 seconds until the LED flashes red and blue, indicating pairing mode.
- Dina telepon pinter anjeun, buka setélan Bluetooth teras milarian alat énggal.
- Select "Parani M10" from the list of available devices.
- Once paired, the LED will flash blue, and the LCD will confirm connection.
- You can now listen to music, GPS navigation, and make/receive phone calls through your headset.
5.4 Panganteur Bluetooth
The Parani M10 supports intercom communication with up to four other Parani users on its dedicated Bluetooth intercom network.
- Ngapasangkeun Interkom:
- Ensure both M10 units are powered on.
- On one M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- On the second M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- The units will automatically search and pair. Once paired, the LED will flash blue.
- Repeat this process for additional units (up to four total).
- Starting/Ending Intercom Conversation:
- To start an intercom conversation, tap the Jog Dial.
- To end an intercom conversation, tap the Jog Dial again.
5.5 Telepon
- Ngajawab Telepon: Ketok Tombol Multifungsi.
- Tungtung Telepon: Ketok Tombol Multifungsi.
- Nolak Telepon: Pencet sareng tahan Tombol Multi-fungsi salami 2 detik.
- Dial sora: In standby mode, press and hold the Multi-function Button for 3 seconds. (Requires smartphone support for voice commands).
6. Pangropéa
6.1 beberesih
Ngusap unit utama kalayan lemes, damp cloth. Do not use harsh chemicals or solvents. Ensure all ports are dry before charging or use.
6.2 Perawatan Batré
- Ngeusi batre alat rutin, sanajan teu dipake, pikeun ngajaga kaséhatan batré.
- Avoid storing the device in extreme temperatures.
- Do not attempt to replace the internal battery yourself. Contact Sena support for battery service.
6.3 Apdet firmware
Pariksa Sena sacara berkala website for firmware updates. Updating the firmware can improve performance and add new features. Connect the device to your computer using the USB cable and follow the instructions provided by Sena's Device Manager software.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat teu hurung. | batré lemah. | Ngecas alat sapinuhna. |
| Teu tiasa dipasangkeun sareng smartphone. | Device not in pairing mode; smartphone Bluetooth off; interference. | Ensure M10 is in pairing mode (red/blue flashing LED). Turn smartphone Bluetooth off and on. Move away from other Bluetooth devices. |
| Interkom teu nyambung. | Units not in intercom pairing mode; out of range; already connected to other devices. | Ensure both M10 units are in intercom pairing mode. Reduce distance between units. Disconnect from other Bluetooth devices before intercom pairing. |
| Taya audio tina speaker. | Volume too low; speakers not connected properly; faulty speakers. | Increase volume using the Jog Dial. Check speaker connections. Test with another audio source if possible. |
| Mikropon teu jalan. | Microphone not connected properly; faulty microphone. | Check microphone connection to the main unit. Ensure microphone is positioned correctly. |
7.1 Reset pabrik
If issues persist, a factory reset may resolve them. To perform a factory reset, press and hold the Multi-function Button and the Jog Dial simultaneously for 10 seconds. The device will reset to its default settings.
8. Spésifikasi
| Ngaran modél | Parani M10 |
| Vérsi Bluetooth | Bluetooth 5.1 |
| Rentang Intercom | Up to 1 km (0.6 miles) in open terrain |
| Max Intercom Users | 4 (Parani-only network) |
| Waktu Ngobrol | Nepi ka 16 jam |
| Waktu Ngecas | Kurang leuwih 2.5 jam |
| Suhu Operasi | -10°C nepi ka 55°C (14°F nepi ka 131°F) |
| Beurat | Kira-kira. 60g (2.1 oz) |
Note: Specifications are subject to change without notice. Actual performance may vary based on environmental conditions and usage.
9. Garansi jeung Rojongan
9.1 Émbaran jaminan
Sena products are covered by a limited warranty from the date of purchase. For detailed warranty terms and conditions, please refer to the official Sena websitus atanapi kartu garansi anu kalebet sareng produk anjeun. Simpen bukti pameseran anjeun pikeun klaim garansi.
9.2 Rojongan Palanggan
Kanggo bantosan téknis, ngungkulan masalah, atanapi patarosan umum, mangga buka Sena resmi website for support resources, FAQs, and contact information. You can also reach out to your local dealer for assistance.
- Sena Websitus: www.sena.com
- Parani Websitus: www.parani.com