Briidea RV Fresh Water Tank Level Sensor Panel HRWL-01US Instruction Manual

Bubuka

The Briidea precise monitoring system is specifically designed to monitor the water level in the fresh water tank of a mobile home. This system allows you to refill the tank in a timely manner, preventing situations where the tank runs empty. The kit includes all necessary components, eliminating the need to purchase additional sensing electrodes and saving both time and money.

Émbaran Kasalametan

Salawasna pegatkeun sambungan kakuatan saméméh instalasi atawa perawatan.
Ensure proper wiring connections to avoid electrical hazards. Refer to the wiring diagram.
Do not expose the unit to extreme temperatures or direct water immersion.
This device is intended for fresh water tanks only. Do not use with other liquids.
Jauhkeun tina jangkauan barudak.

Eusi pakét

The Briidea RV Fresh Water Tank Level Sensor Panel package typically includes:

RV Water Tank Level Display Panel with LED Indicator
Non-contact Water Level Sensor
Nyambungkeun Kawat
Pamasangan screws

spésifikasi

merek	Briidea
Modél	HRWL-01US
Input kakuatan	DC 7-32V
Métode deteksi	Non-kontak
Max Detection Depth	13 kaki (kira-kira 3.96 méter)
Tipe tampilan	Lampu Indikator LED
Dimensi produk	7.62 x 2.54 x 2.54 cm (kira-kira)
Item Beurat	159 gram

Setup sareng Instalasi

1. Sensor Placement (Contactless Detection)

The Briidea system utilizes a non-contact detection method, ensuring the cleanliness and hygiene of your fresh water by avoiding direct contact between the sensor and the water. For optimal performance, the sensor must be installed in the middle of the water tank.

Diagram showing contactless detection method with sensor placement in the middle of the tank and detection diameter calculation.

Gambar: Contactless detection method. The sensor should be installed in the middle of the tank. The detection diameter is approximately 0.5 times the tank height.

2. Tank Compatibility Reminder

Sateuacan meuliasing and installing, please ensure your water tank meets the following requirements for accurate readings:

The sensor should be installed in the middle of the water tank.
The length of the water tank should be approximately twice its height.

3. Simple Wiring

Connect the sensor panel to your DC 7-32V power source (e.g., RV battery) and the water tank sensor as shown in the diagram. Ensure all connections are secure and correctly polarized.

Wiring diagram showing connections from a battery to the sensor panel and then to the water tank sensor.

Gambar: Simple wiring diagram for the sensor panel, battery, and water tank sensor.

4. Mounting the Display Panel

Choose a convenient and visible location inside your RV or boat for the display panel. Use the provided mounting screws to secure the panel. Ensure there is enough space behind the panel for wiring connections.

Parentah Operasi

1. Lampu Indikator LED

The display panel features multi-colored LED indicator lights that provide an instant, at-a-glance overview of the current water level in your tank. This eliminates the need for manual daily checks by opening the tank.

Image of the Briidea LED indicator panel installed in an RV, showing various colored lights indicating water levels.

Gambar: LED indicator lights on the Briidea sensor panel, providing a visual representation of water levels.

2. Power-Off Memory Function

The device includes a power-off memory function. In the event of a power interruption or malfunction, there is no need to reconfigure the settings, making it more convenient for continuous use.

Pangropéa

beberesih: Wipe the display panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Inspeksi sénsor: Periodically check the external sensor for any physical damage or loose connections.
Pariksa Wiring: Ensure all wiring remains secure and free from corrosion.
Kaayaan Tangki: Maintain the cleanliness of your fresh water tank to prevent buildup that might affect sensor performance over time.

Pamérésan masalah

Masalah	Mungkin Cukang lantaranana	Solusi
Incorrect water level reading (e.g., flashing red when tank is half full)	Improper sensor placement. Tank dimensions not suitable for detection method. kabel leupas atawa faulty.	Verify sensor is installed in the middle of the tank. Confirm tank length is approximately twice its height. Check all wiring connections for security and proper polarity.
No display/power	Taya catu daya. Kabel salah. Unit lepat.	Check DC 7-32V power source. Review wiring diagram and ensure correct connections. Kontak rojongan customer lamun masalah persists.
Bacaan teu konsisten	Sensor interference. Tank movement.	Ensure no obstructions near the sensor. Minimize tank movement during readings.

Aplikasi lega

The RV water level gauge is powered by a DC 7-32V power source, making it suitable for various off-grid applications. It is specifically designed for detecting water levels in fresh water tanks across a range of recreational vehicles and marine craft.

Kandaraan Rékréasi (RV)
Campers
Parahu
Large Caravans

Collage of images showing the Briidea sensor panel used in various applications including RVs, campers, jeung parahu.

Gambar: Examples of wide applications for the Briidea water level sensor panel, including RVs, campers, jeung parahu.

Émbaran jaminan

This product comes with a standard manufacturer's warranty. Please refer to the product packaging or contact the retailer for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.

Ngarojong

For technical assistance, troubleshooting, or any questions regarding your Briidea RV Fresh Water Tank Level Sensor Panel, please contact Briidea customer support through their official website or the retailer where the product was purchased. Have your model number (HRWL-01US) and purchase details ready when contacting support.

Briidea HRWL-01US