PARKSIDE PHET 15 C2 Electric Stapler Instruction Manual

Bubuka

Thank you for choosing the PARKSIDE PHET 15 C2 Electric Stapler. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.

Parentah Kasalametan

Salawasna perhatikeun pancegahan kaamanan di handap ieu pikeun ngirangan résiko kejutan listrik, seuneu, sareng tatu anu parah.

• Kasalametan Area Gawé: Tetep wewengkon gawé beresih jeung well-cahayana. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
• Kasalametan listrik: Colokan alat listrik kedah cocog sareng stop kontak. Pernah ngarobah colokan dina sagala cara. Ulah nyiksa ari. Ulah make ari keur mawa, narik, atawa cabut colokan alat kakuatan. Jauhkeun ari tina panas, minyak, ujung seukeut, atawa bagian pindah.
• Kasalametan Pribadi: Salawasna nganggo pelindung panon. Anggo pelindung dédéngéan nalika beroperasi kanggo waktos anu lami. Paké baju anu pantes; hindari pakean atanapi perhiasan anu leupas. Jauhkeun rambut, pakean, sareng sarung tangan tina bagian anu obah.
• Pamakéan sareng Perawatan Alat: Ulah maksakeun alat kakuatan. Anggo alat kakuatan anu leres pikeun aplikasi anjeun. Pegatkeun sambungan colokan ti sumber listrik samemeh nyieun sagala panyesuaian, ngaganti asesoris, atawa nyimpen parabot kakuatan.
• Specific Stapler Safety: Always assume the tool contains fasteners. Do not point the tool at yourself or others. Keep hands and body parts away from the discharge area. Ensure the workpiece is stable before fastening.

Produk Leuwihview

The PARKSIDE PHET 15 C2 is a lightweight and compact electric stapler designed for quick and comfortable fastening tasks. It features a non-slip soft grip for comfortable one-handed operation.

Gambar 1: Sisi view of the PARKSIDE PHET 15 C2 Electric Stapler, highlighting its compact design and ergonomic grip. The power cord is visible at the rear.

Figure 2: The PARKSIDE PHET 15 C2 Electric Stapler displayed with a selection of compatible staples and nails, ready for use.

Komponén konci:

• pemicu: Aktipkeun mékanisme stapling.
• Majalah: Holds staples or nails. Features a level indicator.
• Nose/Discharge Area: Where fasteners exit the tool.
• Lembut Pakem cecekelan: Nyayogikeun kanyamanan sareng kontrol salami operasi.
• Kabel listrik: Nyambungkeun alat ka outlet listrik.

Disetél

1. Loading Fasteners

Ensure the tool is unplugged from the power source before loading fasteners.

1. Tangtukeun lokasi mékanisme release majalah, ilaharna di handap atawa pungkur alat.
2. Slide open the magazine.
3. Insert the appropriate staples (6-14 mm) or nails (14-15 mm) into the magazine. Ensure they are oriented correctly, with the points facing forward.
4. Close the magazine securely until it clicks into place. The level indicator on both sides of the magazine will show the remaining fastener quantity.

Gambar 3: Tukangeun view of the stapler with the magazine open, illustrating how to load staples or nails. The red tab indicates the magazine release.

2. Nyambungkeun Power

Once fasteners are loaded, plug the power cord into a suitable electrical outlet (230V AC, 50Hz).

Parentah Operasi

The PARKSIDE PHET 15 C2 is designed for comfortable one-handed operation with its soft grip.

1. Nyiapkeun workpiece: Ensure the material you are fastening is clean, dry, and free from obstructions.
2. Alat Posisi: Place the nose of the stapler firmly against the workpiece at the desired fastening point. Ensure the tool is held perpendicular to the surface for optimal penetration.
3. Aktipkeun: Press the trigger to drive a fastener into the material. Release the trigger to stop.
4. Check Fastening: Inspect the driven fastener to ensure it is properly seated. Adjust pressure or position if necessary for subsequent fastenings.

Figure 4: The electric stapler in action, securing fabric to a canvas frame. This illustrates the tool's ease of use for upholstery and crafting projects.

Figure 5: The stapler being used to attach a board, showcasing its application in general DIY and construction tasks.

Aplikasi:

This electric stapler is suitable for various tasks including:

• Decoration projects
• DIY crafts
• Upholsteri lampu
• Home repairs and fastening tasks

Figure 6: Detail of fabric securely fastened to a wooden chair frame using staples, demonstrating a typical upholstery application.

Pangropéa

Regular maintenance ensures the longevity and safe operation of your electric stapler.

• beberesih: Disconnect the tool from the power supply. Use a dry cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners. Periodically clear any dust or debris from the magazine and discharge area.
• Panyimpenan: Store the tool in a dry, secure location out of reach of children. Ensure the power cord is neatly coiled and not kinked.
• Pamariksaan: Before each use, inspect the power cord for damage. Check the tool for any loose parts or signs of wear. Do not use a damaged tool.

Pamérésan masalah

Tingali tabel di handap pikeun masalah umum sareng solusina.

Upami masalah tetep saatos nyobian solusi ieu, mangga ngahubungi dukungan palanggan.

spésifikasi

• model: PHET 15 C2
• kakuatan: 70 W
• Masukan Voltage: 230V AC, 50Hz
• Compatible Staples: Type 53, 6-14 mm
• Compatible Nails: Type 47, 14-15 mm
• Modeu operasi: Otomatis
• Fitur: Lightweight, compact, soft grip, double-sided level indicator.
• Asesoris kaasup: 400 x 10 mm staples, 100 x 14 mm nails.

Garansi sareng Rojongan

Kanggo inpormasi garansi atanapi dukungan téknis, mangga tingali dokuméntasi anu disayogikeun sareng pameseran anjeun atanapi hubungi produsén sacara langsung. Simpen bukti pameseran anjeun pikeun klaim garansi naon waé.