HmmtyRack HR0017
HmmtyRack Roof Rack Cross Bars Instruction Manual
Model: HR0017 | Compatible with Hyundai Tucson 2016-2026
1. Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your HmmtyRack Roof Rack Cross Bars. Designed for durability and security, these cross bars enhance your vehicle's cargo carrying capabilities. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image 1.1: HmmtyRack Roof Rack Cross Bars with included installation tools and keys.
2. Kasaluyuan Kandaraan
These roof rack cross bars are specifically designed for:
- Hyundai Tucson: Model years 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
- Tingkat motong: SE, SEL, N Line, Limited
- sarat: Vehicle must be equipped with existing flush side rails.
Important: Please verify your vehicle's year, make, model, and the presence of flush side rails before attempting installation. These cross bars are not compatible with vehicles lacking flush side rails.

Image 2.1: Visual guide for compatible Hyundai Tucson models with flush side rails (top) and incompatible models without side rails (bottom).
3. Eusi Paket
Before beginning installation, ensure all components listed below are present in your package. If any parts are missing or damaged, please contact customer support.
- Front Cross Bar: 1 unit
- Rear Cross Bar: 1 unit
- Base Feet: 4 units
- Keys: 2 units
- Allen Wrench: 2 units
- Installation Instruction Manual: 1 unit

Image 3.1: All components included in the package, showing the front and rear bars, bases, keys, and wrenches.
4. Setup jeung Instalasi
Installation is designed to be straightforward. Please follow these steps carefully. A screwdriver is the primary tool required for assembly.
- Identipikasi Palang Hareup jeung Palang Tukang: Note that the front cross bar is typically longer than the rear cross bar to accommodate the vehicle's roof curvature. Refer to the included installation manual for specific measurements and identification.
- Attach Base Feet: Securely attach the four base feet to the cross bars. Ensure the directional labels on the cross bars and bases are correctly aligned for proper orientation.
- Position Cross Bars: Place the assembled cross bars onto your vehicle's flush side rails. The bases are designed for easy snap-on attachment.
- Fasteners Aman: Using the provided Allen wrench, tighten all fasteners to secure the cross bars firmly to the side rails. Do not overtighten.
- Engage Anti-Theft Lock: Once the cross bars are securely installed, use the provided keys to engage the anti-theft locking mechanism on each base. This prevents unauthorized removal and secures the installation.
Reminder: Double-check the package box for the instruction manual and keys, as they may be located at the bottom of the box.

Image 4.1: Detail of the anti-theft lock system, showing the key insertion point for securing the cross bars.
5. Operating Instructions and Safety
5.1 Kapasitas beban
The HmmtyRack Roof Rack Cross Bars have a maximum load capacity of 300 lbs (136 kg). This capacity is for the cross bars themselves. Always refer to your vehicle's owner's manual for the maximum permissible roof load capacity, and never exceed the lower of the two limits.
5.2 Recommended Cargo
These cross bars are suitable for transporting various items that do not fit inside your vehicle, including:
- Roof bags and cargo boxes
- Bicycles (with appropriate bike carriers)
- Surfboards, kayaks, and canoes (with appropriate watercraft carriers)
- Skis and snowboards (with appropriate ski/snowboard carriers)
- Ladders and other sporting goods

Gambar 5.1: Examples of gear that can be carried on the roof rack, including bikes, ski frames, cargo boxes, and kayaks.
5.3 Pancegahan Kasalametan
- Kargo Aman: Always ensure all cargo is properly secured to the cross bars using appropriate tie-downs or carriers. Loose cargo can shift during transit, posing a safety hazard.
- Cék biasa: Periodically check the tightness of all fasteners and the security of your cargo, especially during long trips or after driving on rough terrain.
- Kabiasaan nyetir: Adjust your driving speed and habits when carrying cargo on the roof. Increased wind resistance and a higher center of gravity can affect vehicle handling.
- Clearance: Be mindful of increased vehicle height when entering garages, car washes, or areas with low overhead clearance.
- Operasi Sunroof: The design of these cross bars allows for normal operation of your vehicle's sunroof. Non-slip rubber pads are integrated to protect against scratches.

Image 5.2: The design ensures sufficient clearance for sunroof operation, with anti-slip/scuff rubber pads for protection.
5.4 Aerodynamic Design
The cross bars feature an aerodynamic profile designed to minimize wind noise during travel. While some noise may be present at certain speeds, the design aims to reduce its impact.

Image 5.3: Illustration of the aerodynamic profile dirancang pikeun ngurangan bising angin.
6. Pangropéa
Proper maintenance will ensure the longevity and continued safe operation of your roof rack cross bars.
- Inspeksi rutin: Periodically inspect all components for signs of wear, damage, or corrosion. Check that all bolts and fasteners are tight.
- beberesih: Clean the cross bars with mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish or plastic components. Rinse thoroughly and dry.
- Lubrication: Upami mékanisme konci janten kaku, oleskeun sakedik pelumas grafit kana liang konci.
- Panyimpenan: If the cross bars are not in use for an extended period, consider removing them and storing them in a dry, protected area to prolong their lifespan.
7. Cara ngungkulan
Ieu mangrupikeun solusi pikeun masalah umum anu anjeun tingali:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Angin Noise kaleuleuwihan | Improper installation, loose components, or specific vehicle aerodynamics. | Ensure cross bars are installed correctly and all fasteners are tight. Verify the aerodynamic profile is facing forward. Consider adjusting the position slightly if possible. |
| Difficulty Locking/Unlocking | Dust/debris in lock, stiff mechanism. | Clean the keyhole and apply a small amount of graphite lubricant. Ensure the key is fully inserted and turned correctly. |
| Cross Bars Feel Loose | Pangiketna teu cukup kenceng. | Re-tighten all fasteners using the provided Allen wrench. Ensure the bases are properly seated on the flush side rails. |
| Pindahan Kargo | Improperly secured cargo. | Always use appropriate tie-downs, straps, or specialized carriers to secure cargo firmly to the cross bars. Check cargo security before and during travel. |
8. Spésifikasi produk
| Fitur | Rincian |
|---|---|
| merek | HmmtyRack |
| Nomer modél | HR0017 |
| Bahan | High-grade Aluminum Alloy (bars), High-quality Plastic (base feet) |
| Kapasitas beban | 300 Pon (136 kg) |
| Item Beurat | 9.5 pon |
| Ukuran produk (L x W x H) | 40.2 x 5.9 x 3.7 inci |
| Tipe Pamasangan | Easy Snap |
| Automotive Fit Tipe | Pas Spésifik Kandaraan |
9. Garansi jeung Rojongan
9.1 Émbaran jaminan
HmmtyRack products are manufactured to high-quality standards and are covered by a manufacturer's warranty against defects in materials and workmanship. Specific warranty terms and duration may vary. Please retain your proof of purchase for warranty claims.
9.2 Rojongan Palanggan
For any questions, concerns, or assistance with installation, operation, or troubleshooting that is not covered in this manual, please contact HmmtyRack customer support. Refer to your purchase documentation or the HmmtyRack official websitus pikeun detil kontak.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.