1. Bubuka sarta Produk Leuwihview
Thank you for choosing the BE COOL BC50LEF2301 50L Dehumidifier. This appliance is designed to efficiently remove excess moisture from the air in your home or commercial space, improving air quality and preventing issues like mold and mildew. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your dehumidifier.
Key features of your BE COOL BC50LEF2301 dehumidifier include:
- Powerful dehumidification: Removes up to 50 liters of moisture per day.
- Suitable for large areas: Effective in rooms up to 125 m³ (50 m²).
- User-friendly touch panel with LED display.
- Adjustable humidity levels from 30% to 80%.
- Refrigerant R290 anu ramah lingkungan.
- fungsi timer 24-jam.
- fungsi defrost otomatis.
- Full water tank alarm and automatic shut-off.
- tank cai removable 7 liter.
- Integrated dust filter.
- Kakuatan anjeuntage memory function.
- Equipped with wheels for easy mobility.
2. Parentah Kasalametan
Mangga baca sakabeh parentah kaamanan taliti saméméh ngagunakeun alat pikeun nyegah tatu atawa karuksakan. Simpen manual ieu pikeun rujukan ka hareup.
- Kasalametan listrik: Pastikeun catu daya cocog sareng voltage specified on the rating label. Do not operate the unit with a damaged power cord or plug. Do not share the power outlet with other appliances.
- panempatan: Place the dehumidifier on a flat, stable surface. Maintain at least 20 cm (8 inches) clearance around the unit for proper airflow. Do not block air inlets or outlets.
- Kulkas: This appliance uses R290 refrigerant. Do not puncture the refrigerant circuit. Servicing should only be performed by qualified personnel.
- Tangki cai: Always empty the water tank before moving the unit. Do not drink the collected water.
- Barudak jeung Pets: Jauhkeun barudak sareng piaraan tina alat salami operasi.
- beberesih: Salawasna cabut colokan unit sateuacan beberesih atanapi ngalakukeun perawatan naon waé.
- Kaayaan Operasi: Do not operate the unit in extremely high temperatures or in direct sunlight. The recommended operating temperature range is 5-32°C.
3. Komponén produk
Biasakeun diri anjeun sareng bagian utama dehumidifier anjeun:
- Panél kontrol: Located on the top, with touch buttons and an LED display.
- Outlet hawa: Top front, where dry air is expelled.
- Inlet Udara: Rear, where humid air is drawn in.
- Saringan lebu: Located behind the air inlet, removable for cleaning.
- Tangki cai: Removable tank at the bottom front for collecting condensed water.
- Outlet drainase kontinyu: (If applicable) Located at the rear for connecting a drain hose.
- Roda: Pikeun gampang gerak unit.
- cecekelan: cecekelan terpadu pikeun portability.
4. Setélan
- Ngabongkar bungkusan: Cabut dehumidifier tina bungkusna kalayan ati-ati. Simpen bahan bungkusna kanggo panyimpenan atanapi transportasi ka hareup.
- panempatan:
- Teundeun unit tegak dina permukaan anu rata.
- Ensure there is at least 20 cm (8 inches) of free space around the unit to allow for adequate air circulation.
- Avoid placing the unit near heat sources, in direct sunlight, or in areas prone to splashing water.
- For optimal performance, operate the unit within the recommended temperature range of 5-32°C.
- Sambungan Daya: Plug the power cord into a grounded electrical outlet. Ensure the outlet meets the power requirements of the unit.
- Pamakéan awal: After transport, allow the unit to stand upright for at least 2 hours before plugging it in and turning it on. This allows the refrigerant to settle.
5. Parentah Operasi
The BE COOL BC50LEF2301 features an intuitive touch control panel and LED display for easy operation.
5.1 Fungsi Panel Control
- Tombol Daya (⏻): Pencét pikeun ngahurungkeun atanapi mareuman unit.
- Tombol Mode (M): Cycles through different operating modes (e.g., Auto, Continuous, Drying).
- Humidity Setting (%): Adjusts the desired humidity level from 30% to 80% in 5% increments.
- Tombol Laju Kipas (☰): Milih antara dua kecepatan kipas (Luhur/Handap).
- Tombol Timer (⏱): Sets the 24-hour timer for automatic power ON or OFF.
- Témbong LED: Nembongkeun kalembaban ayeuna, nyetel kalembaban, atawa setelan timer.
5.2 Nyetel kalembaban anu dipikahoyong
Press the Humidity Setting button (%) repeatedly to cycle through desired humidity levels. The display will show the selected percentage. The unit will operate until the room humidity reaches the set level, then pause. It will resume operation if the humidity rises above the set level.
5.3 Fungsi Timer
The 24-hour timer allows you to set a specific time for the unit to turn ON or OFF automatically.
- To set Auto-OFF: While the unit is ON, press the Timer button. Use the humidity setting buttons (or dedicated timer adjustment buttons if present) to set the desired number of hours (1-24) after which the unit will turn off.
- To set Auto-ON: While the unit is OFF, press the Timer button. Set the desired number of hours (1-24) after which the unit will turn on.
5.4 Water Tank Full Alarm and Auto Shut-off
When the 7-liter water tank is full, the unit will automatically stop operating, and an alarm will sound (beep). The LED display may also indicate a full tank. Empty the water tank and reinsert it correctly to resume operation.
5.5 Drainase kontinyu
For extended operation without needing to empty the water tank, you can connect a drain hose to the continuous drainage outlet at the rear of the unit. Ensure the hose is sloped downwards to allow gravity drainage into a suitable receptacle or floor drain.
5.6 Fungsi Defrost
The unit is equipped with an automatic defrost function. If frost builds up on the evaporator coils, the unit will temporarily stop dehumidifying and run the fan to melt the frost. Dehumidification will resume automatically once the defrost cycle is complete.
6. Pangropéa
Pangropéa rutin ngajamin kinerja optimal sareng manjangkeun umur dehumidifier anjeun.
6.1 Ngabersihkeun Saringan Lebu
- Pareuman unit sareng cabut colokan tina stop kontak listrik.
- Locate the air inlet grille at the rear of the unit.
- Cabut saringan lebu.
- Clean the filter with a vacuum cleaner or wash it with warm, soapy water. Rinse thoroughly and allow it to air dry completely before reinserting.
- Reinsert the dry filter and close the grille.
Recommendation: Clean the dust filter every two weeks or more frequently depending on usage and air quality.
6.2 Ngosongkeun Tangki Cai
- When the water tank is full, the unit will stop operating and alert you.
- Taliti tarik kaluar tank cai ti hareup unit.
- Ngosongkeun cai anu dikumpulkeun.
- Clean the tank periodically with mild detergent and water to prevent mold growth. Rinse thoroughly.
- Reinsert the empty tank firmly into the unit. Ensure it is correctly seated to allow the unit to resume operation.
6.3 Ngabersihan Unit Exterior
Ngusap bagian luar unit kalayan lemes, damp lawon. Ulah make bahan kimia kasar, cleaners abrasive, atawa pangleyur, sabab ieu bisa ngaruksak beungeut cai.
6.4 Panyimpenan
Upami nyimpen unit kanggo waktos anu panjang:
- Cabut unit sareng kosongkeun tangki cai.
- Clean the dust filter and the exterior.
- Allow the unit to dry completely for at least 24 hours in a well-ventilated area.
- Simpen unit dina tempat anu tiis sareng garing, langkung saé dina bungkus aslina.
7. Cara ngungkulan
Sateuacan ngahubungi dukungan palanggan, mangga tingal pituduh ngungkulan ieu pikeun masalah umum:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Unit teu hurung. | Taya catu daya. Kabel listrik teu nyambung leres. Water tank full or not correctly inserted. | Pariksa stop kontak kakuatan sarta circuit breaker. Pastikeun kabel listrik dicolokkeun sacara aman. Empty water tank and reinsert it correctly. |
| Unit ngajalankeun tapi teu dehumidifying. | Suhu kamar handap teuing (di handap 5°C). Saringan hawa mampet. Humidity setting is higher than current room humidity. Panto/jandéla dibuka. | Operate unit within recommended temperature range. Ngabersihan saringan hawa. Set desired humidity lower than current room humidity. Close doors and windows to isolate the room. |
| Indikator pinuh bak cai hurung, tapi bak teu pinuh. | Tangki cai henteu leres diselapkeun. Ngambang switch gangguan. | Cabut sareng selapkeun deui bak cai pageuh. Kontak rojongan customer lamun masalah persists. |
| Unit ribut. | Unit henteu dina permukaan anu rata. Saringan hawa mampet. Masalah komponén internal. | Tempatkeun unit dina permukaan anu rata sareng stabil. Ngabersihan saringan hawa. Kontak rojongan customer. |
| Ibun dina coils. | Suhu kamar rendah teuing. | The unit's automatic defrost function should activate. If not, turn off the unit and allow it to defrost naturally. Ensure operating temperature is above 5°C. |
If the problem persists after trying these solutions, please contact BE COOL customer support.
8. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| merek | Janten Cool |
| Nomer modél | BC50LEF2301 |
| Kapasitas Dehumidification | Approx. 50 Liters/24h |
| Kapasitas Tangki Cai | 7 liter |
| Kakuatan | 680 Watt |
| Disarankeun Ukuran Kamar | Nepi ka 125 m³ (50 m²) |
| Ukuran produk (L x W x H) | 26.6 x 37.8 x 61.5 cm |
| Item Beurat | 19 kg |
| Bahan | palastik |
| Refrigerant | R290 (ramah lingkungan) |
| Laju kipas | 2 |
| Fitur husus | Two fan levels, Dust filter, Full water tank alarm, Defrost function, Power outage memory, 24-hour timer, Touch panel, Removable tank, Wheels. |
9. Garansi jeung Rojongan
This BE COOL dehumidifier comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact BE COOL customer support. Contact information can typically be found on the product packaging, the official BE COOL websitus, atawa resi pameseran Anjeun.
When contacting support, please have your model number (BC50LEF2301) and purchase date ready.
