ErGear Electric Standing Desk (Model EGESD71V-US) - User Manual

Bubuka

Thank you for choosing the ErGear Electric Standing Desk. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your new height-adjustable desk. Please read this manual carefully before assembly and use to ensure safe and efficient operation.

Image: The ErGear Electric Standing Desk, 44x24 inches, in vintage brown, set up with a laptop, monitor, and other office items. It features a control panel for height adjustment.

Émbaran Kasalametan penting

• Do not exceed the recommended maximum weight limit of 176 pounds to ensure stability and longevity of the desk.
• Ensure all cables are properly managed and have sufficient slack to avoid damage or disconnection during height adjustments.
• Jauhkeun barudak sareng piaraan tina méja nalika dianggo pikeun nyegah cilaka.
• Hindarkeun nempatkeun cairan langsung dina panel kontrol atanapi caket komponén listrik.
• Anggo ngan ukur adaptor daya sareng komponén anu disayogikeun.
• Pariksa sadaya sekrup sareng sambungan sacara rutin pikeun mastikeun éta tetep pageuh.

Eusi pakét

Before beginning assembly, please verify that all components are present and undamaged. Refer to the assembly video for a visual guide to the parts.

• Desktop (Two-piece)
• Suku Meja (2)
• Side Plates (2)
• Rod transmisi
• Panél kontrol
• Adaptor kakuatan
• Klip Manajemén Kabel
• Pangait Headphone (2)
• All necessary screws and tools (Allen wrench, etc.)

Gambar: Hiji ngabeledug view of the ErGear Electric Standing Desk components, including the two-piece desktop, leg frames, control panel, and various hardware, laid out on a white background.

Setup sareng Majelis

Follow these steps to assemble your ErGear Electric Standing Desk. An average assembly time is approximately 30 minutes.

Step 1: Assemble the Desk Legs

1. Attach the foot pads to the bottom of each leg.
2. Connect the leg frames using the provided crossbar and screws. Ensure all screws are tightened securely.

Gambar: A close-up view of the desk leg assembly, showing screws being inserted to secure the leg components.

Step 2: Attach Side Plates and Transmission Rod

1. Secure the side plates to the top of the assembled leg frames using the designated screws.
2. Insert the transmission rod into the appropriate slots on the leg frames and motor assembly. Ensure it is fully engaged. If the desk legs are not the same height, insert the rod into the left leg and turn to adjust until they are level.

Image: The desk frame with the transmission rod correctly installed, connecting the two leg mechanisms.

Step 3: Assemble the Desktop and Other Parts

1. Place the two-piece desktop upside down on a soft, clean surface.
2. Align the desktop pieces and secure them together using the provided connectors and screws.
3. Carefully place the assembled leg frame onto the desktop, aligning the screw holes.
4. Attach the leg frame to the desktop using the provided screws.
5. Install the control panel and headphone hooks to the underside of the desktop as indicated in the instructions.

Image: The underside of the desk, showing the control panel and cable management clips attached to the desktop.

Lengkah 4: Sambungkeun Kabel

1. Connect the motor cable to the control box.
2. Connect the control panel cable to the control box.
3. Connect the power adapter to the control box and then to a power outlet.
4. Use the provided cable management clips to organize all cables neatly.

For a visual step-by-step guide, please watch the official assembly video:

Parentah Operasi

Your ErGear Electric Standing Desk features an intuitive control panel for easy height adjustment and memory presets.

adjustment jangkungna

• Angkat Meja: Pencét jeung tahan tombol Panah ka luhur (▲) tombol pikeun ngangkat méja ka jangkungna anu dipikahoyong.
• Meja Handap: Pencét jeung tahan tombol Panah ka handap (▼) tombol pikeun nurunkeun méja ka jangkungna anu dipikahoyong.
• The desk height can be adjusted smoothly from 28.35 inches to 46.46 inches.

Image: A close-up of the ErGear desk control panel, showing the digital height display and the up/down arrow buttons for manual adjustment.

Mémori prasetél

The control panel allows you to save up to three preferred height settings for quick transitions.

1. Pikeun nyimpen prasetél: Atur méja kana jangkungna anu dipikahoyong nganggo panah ka luhur/ka handap. Pencét "S" button, then immediately press one of the number buttons ("1", "2", atawa "3") pikeun nyimpen jangkungna ayeuna kana prasetél éta.
2. Pikeun Nganggo Preset: Kantun pencét tombol angka anu saluyu ("1", "2", atawa "3"). Méja bakal otomatis pindah ka jangkungna anu disimpen.

Observe the smooth operation of the desk's height adjustment:

Pangropéa

• beberesih: Ngusap beungeut desktop ku lemes, damp lawon. Hindarkeun bahan kimia anu kasar atanapi pembersih abrasive anu tiasa ngaruksak finish.
• Pamariksaan: Pariksa sadaya sekrup sareng sambungan sacara berkala pikeun mastikeun éta pageuh. Kencengkeun deui upami diperyogikeun.
• Manajemén Kabel: Ensure cables remain organized and free from entanglement to prevent damage during height adjustments.
• Perawatan Motor: The motor is designed for long-term operation. Avoid overloading the desk beyond its maximum weight capacity.

Pamérésan masalah

spésifikasi

• merek: ErGear
• Jumlah modél: EGESD71V-US
• Desain méja: Méja nangtung listrik
• Bahan Desktop: Kayu Rekayasa (Laminasi)
• Bahan dasar: Alloy Steel
• warna: Vintage Coklat
• ukuran: 44 x 24 Cm
• Jangkungna minimum: 28.35 inci
• Jangkungna maksimum: 46.46 inci
• Ketebalan Tabletop: 0.75 inci
• Maksimum Beurat rekomendasi: 176 pon
• Majelis Diperlukeun: Leres (Disarankeun 1 jalma)
• Didaptarkeun UL: Sumuhun

Émbaran jaminan

ErGear products come with a limited warranty. For specific details regarding your product's warranty coverage, please refer to the documentation included with your purchase or visit the official ErGear websitus.

• Desktop and Desk Frame: perlindungan 5 taun
• Motors and Electrical Components: perlindungan 2 taun

Rojongan Palanggan

If you encounter any issues or have questions regarding your ErGear Electric Standing Desk, please contact our customer support team for assistance.

• Dukungan Online: Visit the official ErGear websitus pikeun FAQs jeung sumber rojongan.
• Surélék: Refer to your product packaging or the ErGear websitus pikeun alamat surélék layanan palanggan.
• Telepon: Refer to your product packaging or the ErGear websitus pikeun nomer telepon layanan palanggan.