Joomer 32FT White Christmas Icicle String Lights Instruction Manual

1. Émbaran Kasalametan

Mangga baca sareng pahami sadaya pitunjuk kaamanan sateuacan dipasang sareng dianggo. Upami henteu nuturkeun pitunjuk ieu tiasa nyababkeun sengatan listrik, kahuruan, atanapi tatu parah.

• Ngan pamakéan outdoor: These icicle lights are designed for outdoor use. Ensure all connections are secure and protected from direct water exposure.
• Rating waterproof: The icicle string lights are waterproof and snow resistant. However, the power adapter is henteu waterproof. Keep the power adapter away from any source of water to prevent electrical hazards.
• Sumber Daya: Use only with the provided ETL certified adapter. Do not exceed the maximum wattage atawa voltage.
• wates sambungan: Do not connect more than 3 sets of these icicle lights end-to-end. Exceeding this limit may overload the circuit and pose a fire risk.
• Pamasangan: Do not secure wiring with staples or nails. Do not hang the string lights in a way that could cut or damage wire insulation.
• Panyimpenan: When not in use, store the lights in a cool, dry place, away from direct sunlight.

2. Eusi Paket

• 1 x Joomer 32FT White Christmas Icicle String Lights (50 drops)
• 1 x ETL Certified Power Adapter

3. Spésifikasi

4. Setup jeung Instalasi

4.1 Ngabongkar jeung Persiapan

1. Carefully remove the icicle lights from the packaging.
2. Untangle the string lights gently. It is recommended to hold the bundle in one hand and let one end drop to the floor, then walk away to allow the lights to untangle naturally.
3. Inspect the lights and power adapter for any signs of damage. Do not use if damaged.

4.2 Léngkah-léngkah Instalasi

1. Pilih Lokasi: Select a suitable outdoor location for installation, such as eaves, roofs, or along fences. Ensure the power adapter can be placed in a dry, protected area, away from water.
2. Pamasangan: Secure the main string of the icicle lights using appropriate outdoor clips or ties. Avoid using staples or nails that could damage the wiring. Ensure the drops hang freely.
3. Sambungkeun Kakuatan: Plug the icicle lights into the ETL certified power adapter.
4. Sambungkeun sababaraha set (opsional): If connecting multiple sets, ensure the power is disconnected from all sets. Align the male and female connectors at the end of each string and push them together firmly. Twist the waterproof caps to secure the connection. Remember, you can connect up to a maximum of 3 sets.

Image: Joomer 32FT White Christmas Icicle String Lights installed on a house, illuminating the eaves and porch area. The lights feature a bright white glow, creating a festive atmosphere.

Image: A diagram illustrating the dimensions of the Joomer Icicle Lights, including the 32FT lighted length, 9.8FT lead cable, 7.8-inch spacing between drops, and alternating drop lengths of 15.7 and 23.6 inches. It also highlights the end-to-end connectability for up to 3 sets.

Gambar: A close-up view of the end-to-end connectors for the Joomer Icicle Lights, showing how multiple strands can be linked together. The image also displays the UL Listed plug, indicating safety compliance.

5. Parentah Operasi

5.1 Powering on / Pareum

Once properly installed and connected to a power source, the lights will turn on. To turn off, simply unplug the power adapter.

5.2 Changing Lighting Modes

The icicle lights feature 8 different lighting modes. These modes are controlled by a button located on the power adapter.

1. Press the button on the power adapter repeatedly to cycle through the 8 available modes.
2. The built-in memory chip will save your last selected mode setting, so you do not need to reset it each day.

Modeu sadia:

• 1. Kombinasi
• 2. In Wave
• 3. Runtuyan
• 4. Slo-Glo
• 5. Babasing / Lampu kilat
• 6. Lalaunan Diudar
• 7. Kiceupan / Flash
• 8. Ajeg Dina

Image: A close-up of the Joomer Icicle Lights power adapter, showing the button used to cycle through the 8 lighting modes and activate the timer function. The image also depicts various lighting modes in a decorative outdoor setting.

5.3 Fungsi Timer

The lights include a convenient timer function:

1. To activate the timer, pencét lila the button on the power adapter for 3 seconds.
2. The timer indicator light on the adapter will illuminate, confirming activation.
3. Once activated, the lights will stay on for 6 hours and then automatically turn off for 18 hours, repeating this cycle daily.
4. To deactivate the timer, long press the button again for 3 seconds until the timer indicator light turns off.

6. Pangropéa

6.1 beberesih

• Before cleaning, ensure the lights are unplugged from the power source.
• Wipe the lights gently with a soft, damp lawon. Ulah make bahan kimia kasar atawa cleaners abrasive.

6.2 Panyimpenan

• Before storing, ensure the lights are completely dry.
• Carefully coil the string lights to prevent tangling.
• Store the lights and adapter in their original packaging or a suitable container in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Cara ngungkulan

8. Garansi jeung Rojongan

8.1 Émbaran jaminan

This Joomer product comes with a garansi 1 taun from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.

8.2 Rojongan Palanggan

For any questions, concerns, or warranty claims, please contact Joomer customer support through the retailer where the product was purchased or visit the official Joomer store online.

Joomer Store: Visit the Joomer Store on Amazon