Gunting Rambut HTC pikeun Lalaki: Manual Pitunjuk pikeun Pisau Cukur Listrik sareng Panggunting Janggot Sadayana

1. Produk Langkungview

The HTC Hair Clippers for Men is an all-in-one grooming solution designed for precision beard trimming and hair cutting. This cordless device features durable, rust-resistant stainless steel blades and is engineered for user-friendly operation with low-frequency vibrations, making it suitable for various users. Its lightweight and ergonomic design ensures comfortable handling during extended use.

Image 1.1: The HTC Hair Clippers shown with its included guide combs (1mm, 3mm, 5mm, 7mm).

2. Émbaran Kasalametan

Please read all safety instructions carefully before using the device. Failure to follow these instructions may result in injury or damage to the product.

• Hindarkeun kontak sareng panon, kulit, sareng cai.
• Entong dianggo dina murangkalih murangkalih.
• Follow proper cleaning and maintenance procedures as outlined in this manual.
• Keep the device away from heat sources and open flames.
• Unplug the trimmer when not in use or during cleaning.
• Always supervise children when the trimmer is in use or accessible.
• Ulah nyobian ngalereskeun atawa ngaropéa alat sorangan. Kontak rojongan customer pikeun pitulung.

3. Eusi Paket

Pastikeun yén sadaya item aya dina bungkusan:

• HTC Hair Clippers Unit
• 4 Sisir Pituduh (1mm, 3mm, 5mm, 7mm)
• Kabel Ngecas USB
• Sikat beberesih
• Minyak Pelumas
• Manual Pitunjuk (dokumén ieu)

4. Setup jeung Pamakéan Awal

4.1 Ngecas Alat

Before first use, fully charge the hair clippers. The device features a powerful rechargeable lithium battery.

1. Connect the provided USB charging cable to the charging port on the clippers.
2. Plug the other end of the USB cable into a DC adapter, power bank, or laptop USB port.
3. Allow the device to charge for approximately 2 hours for a full charge. The charging indicator will typically show charging status and full charge.
4. A muatan pinuh nyadiakeun nepi ka 110 menit pamakean tanpa kabel.

Image 4.1: The hair clippers being charged via a USB cable.

4.2 Ngalampirkeun jeung Cabut Combs Guide

The clippers come with 4 guide combs (1mm, 3mm, 5mm, 7mm) for various hair lengths.

1. Ngagantelkeun: Align the guide comb with the blade and slide it onto the blade teeth until it clicks securely into place. Ensure it is firmly attached before use.
2. Pikeun ngahapus: Gently push the guide comb upwards from the back, away from the blade, until it detaches.

Image 4.2: Visual guide for attaching and removing the trimmer head and guide combs.

5. Parentah Operasi

5.1 Powering on / Pareum

The clippers feature a simple one-button design for ease of use.

• To turn on the device, press the power button located on the handle.
• Pikeun mareuman alat, pencét deui tombol daya.

5.2 Hair Cutting and Trimming

Ensure hair is clean and dry before trimming for best results.

1. Select the desired guide comb length (1mm, 3mm, 5mm, or 7mm) and attach it securely. For very short trims or detailing, the clippers can be used without a comb.
2. Hold the clippers with the blade flat against the skin or at a slight angle, moving against the direction of hair growth.
3. Use slow, even strokes for a consistent cut.
4. For beard trimming, start with a longer comb length and gradually reduce it until the desired length is achieved.
5. The ergonomic design allows for comfortable handling and precise control.

Image 5.1: Using the clippers for hair cutting.

Image 5.2: Using the clippers for beard trimming.

5.3 Cordless and Corded Use

The clippers can be used cordlessly for up to 110 minutes on a full charge. If the battery is low or depleted, you can plug in the charging cable and continue to use the device while it charges.

6. Pangropéa jeung beberesih

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your clippers.

6.1 Ngabersihan wilah

1. Turn off the clippers and unplug it if connected to power.
2. Cabut sisir pituduh.
3. Carefully detach the trimmer head by pushing it upwards from the backside (refer to Image 4.2).
4. Use the provided cleaning brush to remove any trapped hair from the blades and inside the trimmer head.
5. Reattach the trimmer head by inserting the lug into the guiding slot and pushing it towards the device until it clicks.

6.2 Ngaminyakan Wilah

To maintain blade sharpness and smooth operation, oil the blades regularly (after every few uses or as needed).

1. Pastikeun bilahna bersih sareng garing.
2. Apply one or two drops of the provided lubricating oil evenly across the top of the blades.
3. Turn on the clippers for a few seconds to allow the oil to distribute.
4. Ngusap kaluar sagala kaleuwihan minyak ku lawon lemes.

7. Cara ngungkulan

If you encounter issues with your HTC Hair Clippers, refer to the following common problems and solutions:

Lamun masalah persists sanggeus nyobian solusi ieu, mangga ngahubungan rojongan customer.

8. Spésifikasi produk

• model: B0D873DY45
• merek: HTC
• Sumber Daya: Batré Powered (1 batré Litium Ion kaasup)
• Kahirupan batré: Nepi ka 110 menit pamakéan tanpa kabel
• Waktu Ngecas: Kurang leuwih 2 jam
• Ukuran produk: 1.54 x 1.38 x 6.3 inci
• Beurat barang: 0.21 Kilogram (7.37 ons)
• Bahan sabeulah: Beusi sténless
• Included Guide Combs: 1mm, 3mm, 5mm, 7mm
• Pamakéan anu disarankeun: Head, Beard

9. Garansi sarta Rojongan Palanggan

HTC offers a 365-day replacement service from the date of purchase for this product. This warranty covers manufacturing defects and issues arising from normal use.

For any product-related questions, technical assistance, or to claim warranty service, please contact HTC customer support through the retailer's platform or the official HTC website. Please have your purchase receipt and product model number (B0D873DY45) ready when contacting support.