Bosch Professional Detector GMS 120-27 Instruction Manual

1. Bubuka

The Bosch Professional Detector GMS 120-27 is designed for quick and accurate location of various materials within walls, ceilings, and floors. This device assists in identifying metal (magnetic and non-magnetic), live electrical cables, and wooden substructures, ensuring safer drilling and construction activities. Its user-friendly interface and robust design make it suitable for professional use on construction sites.

2. Émbaran Kasalametan

Always read and understand all safety warnings and instructions before operating the device.

• Ensure the device is used within its specified operating conditions.
• Entong nyobian ngarobih alat.
• Jauhkeun alat ieu tina kalembaban sareng suhu anu ekstrim.
• Always verify detection results with other information sources if possible, especially before drilling.

3. Eusi Paket

Pastikeun yén sadaya item aya dina bungkusan:

• Bosch Professional Detector GMS 120-27
• Kasus pelindung
• 2 x Batré Alkali AA
• Marker Pen

4. Produk Langkungview

The GMS 120-27 detector features a robust design with a shock-absorbing rubber housing, providing durability and an IP54 rating for protection against dust and splashing water. Key components include a simplified mode selection interface, a central display, and an LED ring for clear object indication.

Image showing the Bosch Professional Detector GMS 120-27, highlighting its compact design and display.

Fitur konci:

• Tri-colour LED Ring: Indicates detection status (red for object detected, yellow for approaching object, green for no object).
• Material Identification: Distinguishes between magnetic metal, non-magnetic metal, live lines, and non-metallic materials.
• Simplified Mode Selection: Easy switching between detection modes.
• Perumahan anu kuat: Shock-absorbing rubber housing with IP54 protection.

5. Setélan

5.1 Pamasangan batré

1. Tangtukeun lokasi kompartemen batré dina tonggong alat.
2. Buka panutup kompartemen batré.
3. Insert the two AA alkaline batteries, ensuring correct polarity (+/-).
4. Tutup panutup kompartemen batré aman.

5.2 Powering on / Pareum

• Pencét tombol daya pikeun ngahurungkeun alat.
• Pencét jeung tahan tombol daya pikeun mareuman alat.

6. Parentah Operasi

6.1 Pamilihan Mode

The GMS 120-27 offers simplified mode selection for different detection tasks. Refer to the device's display for current mode indication.

6.2 Detection Process

1. Select the appropriate detection mode for the material you are searching for.
2. Tempatkeun detektor sacara rata ngalawan permukaan anu bade di-scan.
3. Pindahkeun alat lalaunan jeung steadily sakuliah beungeut cai.
4. Observe the LED ring and central display for indications.
5. When an object is detected, the LED ring will glow yellow as you approach it, and red when directly over it. The display will also provide information on the type of material detected.
6. Use the included marker pen to mark the detected location if necessary.

6.3 Jero Deteksi

The maximum detection depths are as follows:

• Non-magnetic Metal: 120 mm
• Magnetic Metal: 100 mm
• Voltage-conducting Wires: 50 mm
• Kai: 30 mm

7. Pangropéa

7.1 beberesih

• Rapihkan alat dengan lembut, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Ensure the detection surface is free from dirt and debris for accurate readings.

7.2 Panyimpenan

• Simpen alat dina wadah pelindungna nalika henteu dianggo.
• Cabut batré upami alat moal dianggo kanggo waktos anu panjang pikeun nyegah bocor.
• Simpen di lingkungan anu garing sareng bébas lebu, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.

8. Cara ngungkulan

Upami alatna henteu jalan sapertos anu dipiharep, pertimbangkeun hal-hal ieu:

9. Spésifikasi

10. Garansi jeung Rojongan

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Bosch Professional websitus.