PGST PB-68 Door and Window Sensor User Manual

Bubuka

The PGST PB-68 Door and Window Sensor is a crucial component of your PGST Home Security System, designed to detect unauthorized entry through doors and windows. This sensor operates by detecting the separation of its two main parts, triggering an alarm signal to your connected PGST alarm host and sending notifications to your smartphone. It provides real-time monitoring and enhances the security of your home or property.

penting: This sensor requires a PGST alarm host to function correctly and is compatible only with the PGST home security system.

Eusi pakét

1 x PGST PB-68 Door and Window Sensor (main unit and magnetic contact)
1 x Batré Litium Ion (tos dipasang)
1 x Double-sided Adhesive Tape for installation

Disetél

Syarat Instalasi

A functional PGST alarm host (required for operation).
A clean, dry surface for mounting the sensor.

Léngkah-léngkah Instalasi

Nyiapkeun permukaan: Clean the desired mounting area on your door or window frame and the corresponding moving part (door/window) to ensure proper adhesion.
Pasang pita perekat: Apply the provided double-sided adhesive tape to the back of both the main sensor unit and the magnetic contact.
Pasang Unit Utama: Mount the larger sensor unit onto the fixed frame of the door or window.
Pasang Kontak Magnét: Mount the smaller magnetic contact onto the moving part of the door or window (the door itself or the window sash).
Ngajajarkeun Komponen: Ensure that the main sensor unit and the magnetic contact are aligned horizontally and are less than 10 mm (approximately 0.4 inches) apart when the door or window is closed. Proper alignment is critical for correct operation.
Pamasangan tés: Open and close the door or window several times to verify that the sensor triggers and resets correctly. Confirm that your PGST alarm host registers the sensor's status changes.

PGST PB-68 Door and Window Sensor components, showing the main sensor unit and the magnetic contact. — This image displays the two main components of the PGST PB-68 Door and Window Sensor: the larger sensor unit and the smaller magnetic contact. These two parts are designed to be mounted adjacent to each other on a door or window frame, with a small gap between them when the door/window is closed.

Parentah Operasi

Fungsionalitas

Deteksi: When the door or window to which the sensor is attached is opened, the main sensor unit and the magnetic contact separate. This separation triggers the sensor.
Alarm pemicu: Upon being triggered, the sensor sends a signal to your connected PGST alarm host. The alarm host will then activate its siren (if armed) and initiate any programmed actions, such as sending notifications.
Pangimeutan sacara real-time: Through the PGST application on your smartphone, you can monitor the real-time status of your doors and windows (open or closed) 24 hours a day, 7 days a week. You will receive alarm signals on your mobile phone within seconds of a trigger event.

Pairing with PGST Alarm System

Refer to your PGST alarm host's user manual for specific instructions on how to add new sensors to the system. Generally, this involves putting the alarm host into pairing mode and then triggering the sensor (e.g., by separating its two parts) to register it with the system. The process is typically managed through the PGST mobile application.

Pangropéa

Ngagantian batré

The PGST PB-68 sensor comes with a pre-installed Lithium Ion battery. When the battery level is low, your PGST alarm host or mobile application will typically notify you. To replace the battery:

Carefully detach the main sensor unit from its mounting surface.
Open the battery compartment (refer to the sensor's casing for specific opening mechanism, usually a small latch or screw).
Remove the old Lithium Ion battery.
Insert a new 3.7V Lithium Ion battery, ensuring correct polarity.
Close the battery compartment and re-mount the sensor.
Test the sensor to ensure it is functioning correctly with the alarm system.

beberesih

Ngusap bagian luar sénsor ku kaén anu lembut sareng garing. Ulah make cleaners cair atawa bahan abrasive, sabab ieu bisa ngaruksak alat.

Pamérésan masalah

Masalah	Mungkin Cukang lantaranana	Solusi
Sensor teu ngaktifkeun alarm.	Incorrect alignment of sensor and magnet. Sensor not paired with alarm host. batré lemah atawa maot. Alarm system not armed.	Ensure the gap between the sensor and magnet is less than 10 mm when closed. Refer to your alarm host manual to pair the sensor. Ganti batréna. Arm your PGST alarm system.
Teu aya bewara dina smartphone.	Sensor not triggering. Smartphone app not configured for notifications. Internet connection issues with alarm host or smartphone.	Troubleshoot sensor triggering (see above). Check app settings for notification permissions and preferences. Verify internet connectivity for both your alarm host and smartphone.
Sensor frequently triggers falsely.	Sensor and magnet too far apart or loose. Vibrations or movement causing slight separation.	Re-align and re-secure the sensor and magnet, ensuring a firm attachment. Consider a more stable mounting location if possible.

spésifikasi

Nomer modél	PB-68
Téknologi Sénsor	Sénsor kontak
Sumber Daya	Batré Powered
Jenis Batré	1 x Litium Ion (kaasup)
Voltage	3.7 Volt (DC)
Bahan	palastik
Métode Pamasangan	Self-Napel
Tipe Pamasangan	Tonjolan
Dimensi produk	2.95 x 1.96 x 2.16 inci
Item Beurat	1.44 ons
Alat nu cocog	PGST Home Security System, Smartphone (via app)

Garansi sareng Rojongan

For warranty information, technical support, or further assistance with your PGST PB-68 Door and Window Sensor, please refer to the documentation provided with your PGST alarm host or visit the official PGST website. PGST is committed to customer experience and continuously improving its products and services.

Anjeun ogé tiasa mendakan langkung seueur inpormasi sareng ngahubungi dukungan ngalangkungan Toko PGST di Amazon.

PGST PB-68