1. Bubuka
The Ashly EcoTour™ 500.2 is a high-efficiency touring power amplifier designed for professional audio applications. It delivers 2 x 500W at 2/4 Ohms, 250W at 8 Ohms, and 1000W bridged at 70V. This amplifier is engineered for optimal performance, minimizing electricity usage, and reducing energy costs. This manual provides essential information for the safe and efficient operation of your EcoTour™ 500.2 amppangagung.
2. Émbaran Kasalametan
Mangga baca sareng pahami sadaya pitunjuk kaamanan sateuacan ngoperasikeun alat ieu. Simpen manual ieu kanggo rujukan ka hareup.
- WARNING: RISK OF HAZARDOUS ENERGY. Refer to the operating manual for detailed safety procedures.
- PERHATOSAN: Pikeun ngurangan résiko seuneu atawa shock listrik, ulah ngalaan alat ieu ka hujan atawa Uap.
- Alat ieu saluyu sareng Bagian 15 Aturan FCC. Operasi tunduk kana dua kaayaan di handap ieu: (1) Alat ieu teu tiasa nyababkeun gangguan anu ngabahayakeun, sareng (2) alat ieu kedah nampi gangguan anu ditampi, kalebet gangguan anu tiasa nyababkeun operasi anu teu dipikahoyong.
- Pastikeun ventilasi ditangtoskeun pikeun nyegah overheating. Ulah meungpeuk bukaan ventilasi.
- Always disconnect the power cord before performing any maintenance or making connections.
3. Produk Langkungview
The Ashly EcoTour™ 500.2 is a robust and efficient power amplifier designed for professional touring and fixed installations. It features a durable 19-inch rack-mountable chassis.
3.1 Fitur Panel hareup
Gambar 1: Front panel of the Ashly EcoTour™ 500.2 amplifier, showing the power switch on the left and individual channel gain controls with LED indicators on the right.
- Saklar kakuatan: Located on the left side of the front panel, used to turn the ampLifier ON / OFF.
- Kontrol Gain Saluran: Individual rotary knobs for adjusting the volume/gain of each channel (CH-A, CH-B, CH-C, CH-D).
- Indikator LED: Each channel features LIMIT and SIG LEDs to indicate signal presence and clipping.
3.2 Fitur Panel Rear
Gambar 2: Rear panel of the Ashly EcoTour™ 500.2 amplifier, detailing input/output connections, DIP switches, and power input.
- Input Connectors (CH1/CH2): Dual XLR and 1/4-inch (TRS/TS) input jacks for each channel.
- Speaker Outputs (CH1/2, CH2): SpeakON connectors for speaker connections. Supports CH1 1+/-, CH2 2+/-, and Bridge 1+/2+.
- Bridge/Normal Switch: Selects between normal stereo operation and bridged mono operation for increased power output.
- Setélan Pindah DIP: Configurable switches for Front Panel Disable, High-Pass Filter (HPF), Limiter, and Gain settings (26dB, 32dB, 38dB, 1.4V).
- Input AC: Standard IEC power inlet for the detachable AC power cord.
- Voltage Pamilih: A switch to select between 115V and 230V operation for international use.
- Kipas pendingin: Two cooling fans provide front-to-rear airflow for thermal management.
4. Setélan
Follow these steps to properly set up your Ashly EcoTour™ 500.2 amppangagung.
- Ngabongkar bungkusan: Ati-ati ngaleupaskeun amplifier from its packaging. Inspect for any signs of damage.
- Pamasangan rak: The amplifier is designed for 19-inch rack mounting. Secure it using appropriate rack screws. Ensure adequate space for airflow around the unit.
- Voltage Pilihan: Before connecting to power, verify the voltage pamilih switch dina panel pungkur disetel ka vol benertage pikeun wilayah anjeun (115V atanapi 230V). salah voltagPilihan e tiasa ngaruksak unit.
- Sambungan Input: Sambungkeun sumber audio anjeun (mixer, preamplifier, etc.) to the CH1 and CH2 INPUTs on the rear panel using XLR or 1/4-inch cables.
Gambar 3: Detail of input connector wiring (XLR and 1/4-inch) on the rear panel.
- Konéksi Kaluaran: Connect your speakers to the SPEAKER OUTPUTS using SpeakON cables. Ensure correct polarity.
Gambar 4: Detail of SpeakON connector wiring on the rear panel.
- Konfigurasi Pindah DIP: Adjust the DIP switches on the rear panel according to your system requirements.
meja 1: Setélan Pindah DIP Setélan Posisi ON Posisi OFF Panel hareup Nonaktipkeun Diaktipkeun ditumpurkeun HPF (High Pass Filter) Diaktipkeun ditumpurkeun Wates Diaktipkeun ditumpurkeun Keuntungan 26dB, 32dB, 38dB, 1.4V (per channel, specific switch combinations) Default/Other Gain Setting Refer to the detailed diagram on the rear panel for specific gain switch combinations.
- Sambungan Daya: Connect the supplied AC power cord to the AC Input on the rear panel and then to a suitable power outlet.
5. Parentah Operasi
Sakali dina amplifier is properly set up, follow these steps for operation.
- Daya Hurung: Ensure all gain controls are set to minimum. Press the Power Switch on the front panel to turn on the amplifier. The power indicator LED will illuminate.
- Saluyukeun Keuntungan: Slowly increase the individual Channel Gain Controls (CH-A, CH-B, CH-C, CH-D) to achieve the desired output level.
- Monitor LEDs:
- LED SIG: Illuminates when an audio signal is present on the channel.
- LIMIT LED: Illuminates nalika amplifier is approaching or reaching its maximum output. Reduce the gain if this LED is constantly lit to prevent clipping and distortion.
- Bridge Mode (Optional): If higher power output is required for a single speaker, set the Bridge/Normal switch to BRIDGE. Ensure your speaker is rated for bridged operation and connected to the designated bridged output.
- Pareum listrik: Before powering off, reduce all gain controls to minimum. Then, press the Power Switch to turn off the amppangagung.
6. Pangropéa
Pangropéa rutin mastikeun umur panjang sareng kinerja anu optimal pikeun anjeun amppangagung.
- beberesih: Paké lemes, lawon garing pikeun ngabersihan exterior nu amppangleyur. Ulah nganggo pembersih cair atanapi pangleyur.
- Ventilasi: Ensure the cooling fans and ventilation grilles are free from dust and obstructions. Periodically clean the grilles with a soft brush or vacuum cleaner.
- Sambungan kabel: Periodically check all input and output cable connections for secure fit and signs of wear.
- Panyimpenan: Lamun nyimpen éta amplifier for an extended period, ensure it is in a dry, dust-free environment and protected from extreme temperatures.
7. Cara ngungkulan
This section addresses common issues you might encounter with your amppangagung.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya kakuatan | Power cord disconnected, outlet fault, voltagpamilih e salah. | Check power cord connection, try a different outlet, verify voltagsetélan pamilih e. |
| Taya kaluaran sora | Input/output cables disconnected, gain set to minimum, source device off, speaker fault. | Check all cable connections, increase gain, ensure audio source is active, test speakers. |
| Distorted sound / LIMIT LED constantly on | Sinyal input teuing luhur, amplifier overloaded, speaker impedance mismatch. | Reduce input signal level, lower channel gain, ensure speaker impedance matches ampperingkat lifier. |
| Overheating | Ventilasi tersumbat, beban anu kaleuleuwihi. | Ensure clear airflow around the unit, reduce load, check fan operation. |
8. Spésifikasi
- model: ECOTOUR500.2-120V-U
- Kaluaran kakuatan: 2 x 500W @ 2/4 Ohms, 250W @ 8 Ohms, 1000W bridged @ 70V
- Saluran: 2
- Panyambung Input: XLR, 1/4-inch (TRS/TS)
- Panyambung kaluaran: SpeakON
- Voltage: 100-240VAC, 50/60Hz (selectable)
- ukuran: 16 x 19 x 3.5 inci (40.64 x 48.26 x 8.89 cm)
- Beurat barang: 18.5 pon (8.39 kg)
- Fitur: Ultra High-Efficiency Amplification, Eco-friendly design, Stable down to 0.2 Ohms.
9. Garansi jeung Rojongan
For warranty information or technical support, please contact Ashly customer service or visit the official Ashly websitus.
Ashly Store: Visit the Ashly Store on Amazon
10. Related Videos (Not Applicable)
No official product videos directly relevant to the Ashly EcoTour™ 500.2 amplifier were found in the provided data. Videos found were for a different product (MUSYSIC MU-D9600) and therefore not included.