Shutao 4-Channel 18650 Battery Capacity Tester User Manual

1. Produk Langkungview

The Shutao 4-Channel 18650 Battery Capacity Tester is designed for comprehensive analysis of 18650 lithium batteries. It features four independent channels, allowing simultaneous charging, discharging, and capacity testing. This device also includes internal resistance measurement and automatic cycling functions to optimize battery performance and assess health.

Gambar 1: Leuwihview of the Shutao 4-Channel 18650 Battery Capacity Tester. This image shows the device from an angled perspective, highlighting the four battery slots, the central cooling fan, and the display screen.

2. Eusi Paket

Pastikeun yén sadaya item aya dina pakét anjeun:

• 1 x 18650 Lithium Battery Capacity Tester Module

3. Idéntifikasi komponén

Familiarize yourself with the various components and interfaces of the tester.

Gambar 2: Labeled diagram of the tester's components. This image provides a top-down view of the device with numbered labels pointing to specific parts for easy identification.

1. Type-C 5V Power Supply Interface (Input 1)
2. Type-C 5V Power Supply Interface (Input 2)
3. Channel 1 Battery Holder
4. Channel 2 Battery Holder
5. Channel 3 Battery Holder
6. Channel 4 Battery Holder
7. Channel 1 External Terminal
8. Channel 2 External Terminal
9. Channel 3 External Terminal
10. Channel 4 External Terminal
11. Kipas Radiator
12. Tampilan Monitor
13. Menu /M Key
14. Adjust /S Key
15. Start/Stop /R/S Button
16. Channel /CHN Key
17. CHN1/1 Channel Status Indicator
18. CHN2/2 Channel Status Indicator
19. CHN3/3 Channel Status Indicator
20. CHN4/4 Channel Status Indicator

The display provides real-time information during operation:

Gambar 3: Display interface explanation. This image shows a close-up of the tester's screen, with numbered labels indicating what each displayed value represents.

1. Real-waktos Voltage
2. Nyata-waktos Ayeuna
3. Cumulative Capacity (mAh)
4. Accumulated Energy (mWh)
5. Battery Internal Resistance (mR)
6. Cumulative Running Time
7. Indikasi Saluran
8. Status Indicator (e.g., STA:STOP)
9. Mode Menu (e.g., MODE:AUTO)
10. Stop Discharge Voltage
11. Cycles (LOOP)

4. Setélan

1. Sambungan Daya: Connect the tester to a 5V DC power source using one of the two Type-C interfaces. An adapter and cable are typically included.
2. Nyelapkeun batré: Insert flat-top 18650 batteries into the designated battery holders (3, 4, 5, 6). Ensure correct polarity (+ and -). The tester supports flat-top 18650 batteries.
3. Stabilisasi: After installing a battery, allow a few seconds for the voltage and internal resistance readings on the display to stabilize before proceeding with tests.

5. Parentah Operasi

The tester allows for independent operation of its four channels.

Gambar 4: Display and control buttons. This image provides a detailed view of the tester's screen and the four control buttons located below it, used for navigation and operation.

5.1. Basic Navigation and Channel Selection

• Ngagunakeun éta Channel /CHN Key (16) to switch between the four independent channels (CHN 1 to CHN 4).
• The Menu /M Key (13) is used to enter or exit menu settings.
• The Adjust /S Key (14) is used to change values or select options within a menu.
• The Start/Stop /R/S Button (15) initiates or terminates a test cycle.

5.2. Automatic Charge and Discharge Cycles

The tester supports fully automatic charging and discharging cycles (1-9 cycles adjustable in auto mode).

1. Select the desired channel using the Channel /CHN Key.
2. Pencét éta Menu /M Key pikeun ngasupkeun pilihan mode.
3. Ngagunakeun éta Adjust /S Key to select 'AUTO' mode.
4. Adjust the number of cycles (LOOP: 1-9) using the Adjust /S Key lamun diperlukeun.
5. Pencét éta Start/Stop /R/S Button to begin the automatic cycle. The charging process automatically stops when the battery is full.

5.3. Internal Resistance Measurement

The device utilizes the DC two-wire method to provide reference internal resistance values.

• For the most accurate reading, measure internal resistance when the battery is fully charged.
• The internal resistance value is displayed as 'mR' on the screen (5).

5.4. Setting Stop Discharge Voltage

You can choose from 11 stop-discharge voltage levels (2.5V to 3.5V).

1. Pilih saluran anu dipikahoyong.
2. Enter the menu using the Menu /M Key.
3. Navigate to the 'STOP' voltagé setting.
4. Ngagunakeun éta Adjust /S Key to select the desired stop discharge voltage (2.5V, 2.6V, ..., 3.5V).
5. Konfirmasi setelan tur kaluar tina menu.

5.5. Catetan Panggunaan Penting

• Discharge current is fixed at a maximum of approximately 1A (non-adjustable, non-constant current).
• Ngecas voltage is fixed at 4.2V.
• This tester is teu cocog with LiFePO4 batteries.

6. Émbaran Kasalametan

The device incorporates several safety features to ensure safe operation:

• Perlindungan overheating: The integrated radiator fan (11) and internal sensors help prevent the device from overheating during operation.
• Otomatis Pareum: Settings are automatically saved in case of power loss.
• Charge Cutoff: Automatic charge cutoff prevents overcharging of batteries.
• Leumpang eureun: Configurable stop discharge voltage prevents over-discharging.

Always ensure correct battery polarity when inserting batteries to prevent damage to the device or batteries.

7. Pangropéa

• Jaga alat tetep beresih sareng leupas tina lebu. Anggo kaén anu lemes sareng garing pikeun beberesih.
• Avoid exposing the tester to moisture or extreme temperatures.
• Ensure the cooling fan (11) is not obstructed to maintain proper airflow.
• Simpen alat dina tempat anu garing sareng tiis upami henteu dianggo.

8. Cara ngungkulan

• Internal Resistance Readings Appear High at Low Voltages: If internal resistance readings seem unusually high, reinstall the battery. This can often provide a more accurate measurement.
• Alat Teu Dihurungkeun: Ensure the Type-C power cable is securely connected to a functional 5V DC power source. Try a different cable or adapter if necessary.
• Batré Teu Kadétéksi: Verify that the battery is correctly inserted with the correct polarity and that it is a compatible 18650 flat-top lithium battery.

9. Spésifikasi

Gambar 5: Device dimensions. This image shows the length and width of the tester, indicating measurements of 147mm (5.78 inches) and 102mm (4.00 inches).

10. Garansi jeung Rojongan

For warranty information and technical support, please refer to the seller's policies or contact the manufacturer directly. Specific warranty details are not provided in this manual.