TOMZN TOQ7e WiFi Smart ATS Dual Power Switch Instruction Manual

1. Bubuka

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your TOMZN TOQ7e WiFi Smart Automatic Transfer Switch (ATS). Please read this manual thoroughly before installation and keep it for future reference.

The TOMZN TOQ7e is designed to automatically switch between two power sources, typically city power (Source A) and a generator or secondary power source (Source B), ensuring a continuous power supply to your electrical load. It features WiFi connectivity for smart control and monitoring via the EWelink application.

2. Émbaran Kasalametan

Improper installation or operation can lead to serious injury or damage to the device. Always adhere to the following safety guidelines:

• Pamasangan profésional disarankeun: Pamasangan ngan kedah dilakukeun ku tukang listrik anu mumpuni saluyu sareng sadaya kode listrik lokal sareng nasional.
• Pegatkeun Daya: Always ensure that all power sources are disconnected before performing any installation, wiring, or maintenance.
• Voltage sareng Peunteun Ayeuna: Verify that the device's voltage and current ratings match your electrical system requirements.
• Grounding anu leres: Ensure the device is properly grounded to prevent electrical shock.
• Kaayaan Lingkungan: Ulah kakeunaan alat ieu ka kalembaban anu kaleuleuwihi, lebu, atanapi suhu anu ekstrim di luar rentang operasi anu ditangtukeun.
• Sambungan Aman: Ensure all wire connections are tight and secure to prevent overheating and arcing.

3. Produk Langkungview

The TOMZN TOQ7e ATS is a compact and intelligent device designed for reliable power transfer. It integrates automatic switching capabilities with smart home features.

Gambar 1: Hareupeun view of the TOMZN TOQ7e ATS, showing the manual/auto selector, indicator lights, and terminal connections.

Figure 2: Multiple TOMZN TOQ7e ATS units, illustrating various pole configurations and current ratings.

Komponén konci:

• Power Source A (City Power) Terminals: Connections for the primary power supply.
• Power Source B (Generator) Terminals: Connections for the secondary power supply.
• Load Terminals: Output connections to the electrical load.
• Manual/Auto Selector Switch: Allows selection between manual operation and automatic transfer mode.
• Lampu Indikator: Display the status of Source A, Source B, and the current power supply.
• Modul WiFi: Enables smart control and monitoring via the EWelink app.

4. Spésifikasi

5. Pamasangan

Awas: Ensure all power is disconnected before proceeding with installation. Installation must be performed by a qualified electrician.

5.1 Pamasangan

The TOMZN TOQ7e ATS is designed for DIN rail mounting.

1. Select a suitable location within your electrical panel or enclosure that provides adequate ventilation and protection from environmental factors.
2. Attach the ATS securely to a standard DIN rail by engaging the mounting clip at the bottom of the device.

Gambar 3: Handap view of the TOMZN TOQ7e ATS, showing the DIN rail mounting clip for secure installation.

5.2 Kabel

Follow the wiring diagram provided with your specific product variant or consult a qualified electrician. The general wiring principle involves connecting Source A (City Power), Source B (Generator), and the Load to their respective terminals.

• Source A (City Power): Connect the main utility power lines to the 'Source A' input terminals.
• Source B (Generator/Secondary Power): Connect the generator or secondary power lines to the 'Source B' input terminals.
• Beban: Connect the electrical circuits or appliances you wish to power to the 'Load' output terminals.
• Ensure correct phase and neutral connections.
• Tighten all screw terminals firmly to prevent loose connections and potential hazards.

6. Parentah Operasi

6.1 Operasi Manual

The ATS can be manually switched between power sources using the selector switch on the front panel.

1. Ensure the selector switch is in the 'Manual' position.
2. Rotate the switch to select either 'Source A' or 'Source B' to supply power to the load.
3. Observe the indicator lights to confirm the active power source.

6.2 Operasi otomatis

For automatic power transfer, set the selector switch to the 'Auto' position.

• When 'Source A' (City Power) is available, the ATS will automatically connect the load to Source A.
• If 'Source A' fails, the ATS will detect the outage and, after a pre-set delay, automatically switch the load to 'Source B' (Generator), provided Source B is available and stable.
• When 'Source A' is restored, the ATS will automatically switch the load back to Source A after a pre-set delay.
• Indicator lights will show the status of each source and which source is currently supplying power.

6.3 WiFi Connectivity and EWelink App

The TOMZN TOQ7e integrates with the EWelink app for remote monitoring and control.

1. Download EWelink App: Download the EWelink app from your smartphone's app store (iOS or Android).
2. Ngadaptar/Log: Create an account or log in to your existing EWelink account.
3. Tambahkeun Alat: Follow the in-app instructions to add a new device. This typically involves putting the ATS into pairing mode (refer to the device's specific pairing instructions, usually by pressing and holding a button) and connecting to your home WiFi network.
4. Kadali Jarak Jauh & Pemantauan: Once connected, you can monitor the status of both power sources, view current power usage (if supported by the specific model), and remotely switch between manual and auto modes, or even trigger a manual transfer.
5. Fungsi Timer: Utilize the app's timer features to schedule power transfers or monitor events.

7. Pangropéa

Regular maintenance ensures the longevity and reliable operation of your ATS.

• Inspeksi périodik: Annually inspect the device for any signs of physical damage, loose connections, or discoloration.
• Kabersihan: Keep the device free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
• Kakuatan Terminal: Periodically check and re-tighten all screw terminals to ensure secure electrical connections.
• Uji fungsionalitas: Uji fungsi transfer otomatis sacara périodik ku cara simulasi kaluaran dayatage (e.g., by temporarily disconnecting Source A, if safe to do so and with proper precautions).

8. Cara ngungkulan

If you encounter issues with your TOMZN TOQ7e ATS, refer to the following troubleshooting guide:

Upami masalahna teras-terasan saatos nyobian solusi ieu, hubungi dukungan palanggan atanapi tukang listrik anu mumpuni.

9. Garansi jeung Rojongan

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the point of purchase or contact your seller directly. Ensure you have your product model number and purchase date available when contacting support.