TOMZN Three Phase 3P+N WiFi Smart Circuit Breaker

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your TOMZN TOB1S-63 Three Phase 3P+N WiFi Smart Circuit Breaker. This device is designed to provide advanced electrical protection and smart control capabilities for various applications, including solar installations. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Émbaran Kasalametan

PERHATOSAN: Electrical shock hazard. Installation and servicing must be performed by qualified personnel only. Always disconnect power before working on the circuit breaker or associated wiring.

• Ensure the main power supply is OFF before installation or maintenance.
• Verify correct wiring connections to prevent damage to the device and connected equipment.
• Ulah ngoperasikeun pemutus sirkuit upami katingalina ruksak.
• This device is designed for indoor use or in appropriate enclosures that protect it from direct weather exposure.

3. Produk Langkungview

The TOMZN TOB1S-63 is a smart circuit breaker offering protection against over-voltage (OVP), handapeun-voltage (UVP), over-current (OCP), and short-circuit conditions. It features WiFi connectivity for remote control via the TUYA Smartlife app and supports RS485 Modbus communication.

Gambar 3.1: Hareupeun view of the TOB1S-63 Smart Circuit Breaker, showing the main switches, power and load terminals, WiFi antenna, and indicator lights.

Gambar 3.2: Angled view highlighting the input (Power) and output (Load) terminals, along with the WiFi antenna connection point.

Komponén konci:

• Saklar utama: Manual ON/OFF control for each phase.
• Terminal Kakuatan: Input connections for the three-phase and neutral lines.
• Load Terminals: Output connections to the protected circuit.
• Antenna WiFi: For wireless communication with the Smartlife app.
• Signal/Light Indicators: Provide status feedback (e.g., power, WiFi connection).
• Klip Pemasangan Rel DIN: For secure installation on a standard DIN rail.

Gambar 3.3: Sisi view illustrating the DIN rail mounting clips for easy installation.

4. Setélan

4.1 Pamasangan mékanis

1. Ensure all power is disconnected at the main breaker.
2. Mount the TOB1S-63 circuit breaker onto a standard 35mm DIN rail by engaging the clips on the back of the device.

4.2 Kabel Listrik

The TOB1S-63 is a 3P+N device. Connect the incoming power supply to the 'Power' terminals and the load to the 'Load' terminals as indicated on the device.

• Connect the three phase lines (L1, L2, L3) and the neutral line (N) to the respective 'Power' input terminals.
• Connect the corresponding load lines (L1, L2, L3, N) to the 'Load' output terminals.
• Ensure all screw-type terminals are tightened securely to prevent loose connections and arcing.

Gambar 4.1: Top view with a simplified wiring diagram indicating Power (input) and Load (output) connections.

4.3 WiFi Network Connection (TUYA Smartlife App)

1. Download the 'TUYA Smartlife' app from your smartphone's app store.
2. Register or log in to your Smartlife account.
3. Ensure the circuit breaker is powered ON. The 'Signal' indicator light should be blinking. If not, press and hold the 'Press 10s network' button until it blinks rapidly.
4. In the Smartlife app, tap '+' to add a device. Select 'Electrical' > 'Circuit Breaker (Wi-Fi)'.
5. Follow the on-screen instructions to connect the device to your 2.4GHz WiFi network.
6. Once connected, the 'Signal' indicator will become solid.

4.4 RS485 Modbus Connection (Optional)

For RS485 Modbus communication, connect the A and B terminals of the circuit breaker to your Modbus network. Refer to the Modbus protocol documentation for specific register addresses and communication parameters.

5. Parentah Operasi

5.1 Operasi Manual

To manually turn the circuit breaker ON or OFF, use the red toggle switches on the front panel. Push up for ON, push down for OFF.

5.2 Smartlife App Operation

Once connected to the Smartlife app, you can:

• Remotely turn the circuit breaker ON/OFF.
• Set schedules or timers for automatic operation.
• Monitor real-time current, voltage, sarta konsumsi kakuatan.
• Adjust protection parameters (OVP, UVP, OCP).

5.3 Fitur panyalindungan

The TOB1S-63 provides the following adjustable protection features:

• Langkung Voltage Perlindungan (OVP): Adjustable range 250-300V. The breaker will trip if the voltage exceeds this set limit.
• Dina Voltage Perlindungan (UVP): Adjustable range 150-200V. The breaker will trip if the voltage drops below this set limit.
• Over Current Protection (OCP): Adjustable range 1-63A. The breaker will trip if the current exceeds this set limit.
• Perlindungan Sirkuit pondok: Non-adjustable, inherent protection against short circuits.

Adjust these settings via the Smartlife app interface for the device. After a trip event, investigate the cause before manually resetting the breaker.

6. Pangropéa

The TOMZN TOB1S-63 circuit breaker requires minimal maintenance.

• Periodically inspect the wiring connections to ensure they remain tight and free from corrosion.
• Jaga alat tetep bersih sareng bébas tina lebu sareng kokotor. Anggo lawon anu garing sareng lemes pikeun ngabersihkeun.
• Ulah make cleaners cair atawa pangleyur.
• Pastikeun ventilasi ditangtoskeun sabudeureun alat pikeun nyegah overheating.

7. Cara ngungkulan

• Alat teu hurung:
  • Pariksa catu daya utama.
  • Pastikeun sadaya sambungan kabel input aman.
• Circuit breaker trips frequently:
  • Check for over-current conditions on the load.
  • Verifikasi voltage levels are within the set OVP/UVP ranges.
  • Inspect for short circuits in the connected load.
  • Adjust OVP/UVP/OCP settings if necessary, ensuring they are appropriate for your application.
• Masalah sambungan WiFi:
  • Ensure your router is 2.4GHz compatible.
  • Check WiFi signal strength at the device location.
  • Restart the circuit breaker and your WiFi router.
  • Re-attempt the pairing process in the Smartlife app.
• RS485 Modbus communication failure:
  • Verify A and B terminal connections.
  • Check Modbus network configuration and device address.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your purchase receipt as proof of purchase.