Bellemave Triple Bunk Bed with Slide (Full Over Full Over Full) Instruction Manual

1. Émbaran Kasalametan penting

Please read and understand all instructions before assembling and using this bunk bed. Keep this manual for future reference.

• Kapasitas beurat maksimum: Each bed is designed to support a specific weight. Do not exceed the recommended weight limits.
• Top Bunk Age Limit: Bangku ranjang luhur henteu cocog pikeun murangkalih di handapeun umur 6 taun.
• pager: Always use the guardrails on the upper and middle bunks. Ensure they are properly installed and secured.
• Ketebalan kasur: The mattress used on the upper and middle bunks must not exceed 6 inches in thickness to ensure proper guardrail height.
• Henteu Luncat: Ulah ngantep jalma luncat kana ranjang.
• Majelis: Assembly should be performed by at least two adults. Ensure all hardware is tightened securely before use. Periodically check and re-tighten hardware.
• Slide Safety: Use the slide feet first. Ensure the area around the slide is clear before use.
• Ventilasi: Pastikeun ventilasi nyukupan sabudeureun ranjang.

2. Produk Langkungview sareng Diménsi

The Bellemave Triple Bunk Bed with Slide offers a versatile sleeping solution, featuring three full-sized beds in a space-saving design. It can be configured as a triple bunk bed, a full-over-full bunk bed with a separate full bed, or three individual full beds. The integrated slide and ladders provide access and entertainment.

Figure 2.1: Detailed dimensions of the Bellemave Triple Bunk Bed. Overall dimensions are approximately 78.7" L x 87.3" W x 76.5" H.

Figure 2.2: Bellemave Triple Bunk Bed in its full over full over full configuration.

3. Eusi Paket

Your Bellemave Triple Bunk Bed will arrive in three separate packages. Please ensure all packages have been received before beginning assembly. Carefully unpack all components and verify against the parts list (typically included in one of the packages). If any parts are missing or damaged, please contact customer service immediately.

4. Setup jeung Parentah Majelis

Assembly requires two adults. Clear a spacious area for assembly. Do not fully tighten bolts until all components are loosely assembled. Follow the step-by-step instructions provided in the separate assembly guide included with your product.

4.1 Convertible Configurations

This bunk bed offers flexible configurations:

• Ranjang Susun Tilu: The standard full over full over full setup.
• Bunk Bed with Separate Bed: Can be split into a full over full bunk bed and an independent full bed.
• Three Individual Beds: Can be separated into three distinct full-sized beds.

Gambar 4.1: Kelample configuration: Full over Full bunk bed with a separate full bed.

Gambar 4.2: Kelample configuration: Three individual full beds.

4.2 Ladder and Slide Placement

The short ladder and the slide are convertible and can be installed on either the left or right side of the bed frame, depending on your room layout and preference. Refer to the assembly guide for specific installation steps.

Figure 4.3: The detachable slide component.

Figure 4.4: The ladder for accessing upper bunks.

5. Parentah Operasi

5.1 Using the Ladders

Two built-in ladders provide access to the middle and upper bunks. Always use the ladders to climb up and down. Do not climb on the bed frame directly.

5.2 Using the Slide

The slide is designed for recreational use. Ensure the area at the bottom of the slide is clear before use. Always slide down feet first and one person at a time. Supervise children during slide use.

6. Pangropéa

• beberesih: Ngusap permukaan kalayan lemes, damp lawon. Ulah make bahan kimia kasar atawa cleaners abrasive, sabab ieu bisa ngaruksak finish.
• Pariksa Hardware: Pariksa sadaya baut sareng sekrup sacara berkala pikeun mastikeun éta tetep pageuh. Kencengkeun deui upami diperyogikeun pikeun ngajaga stabilitas sareng kaamanan.
• Kaayaan Lingkungan: Avoid placing the bed in direct sunlight or near heat sources, which can cause wood to dry out or warp. Maintain a stable room temperature and humidity.

7. Cara ngungkulan

7.1 Bagian Leungit atawa Rusak

If you discover any missing or damaged parts upon unpacking, do not proceed with assembly. Contact customer service immediately for assistance. Our professional customer service team will offer help within 24 hours.

7.2 Wobbly or Unstable Bed

If the bed feels wobbly after assembly, ensure all bolts and screws are fully tightened. Double-check that all components are correctly aligned according to the assembly instructions. Disassemble and reassemble if necessary, paying close attention to each step.

7.3 Difficulty with Assembly

If you encounter difficulties during assembly, review the instruction manual carefully. Ensure you have all necessary tools and that parts are oriented correctly. Sometimes, having a second person assist can resolve assembly challenges.

8. Spésifikasi produk

9. Garansi jeung Rojongan

Bellemave is committed to providing quality products and customer satisfaction. If you have any issues, problems, or questions regarding your triple bunk bed, please do not hesitate to contact our professional customer service team. We aim to offer assistance within 24 hours.

For specific warranty details, please refer to the documentation included with your purchase or contact Bellemave customer support directly.