ED-MONITOR-116C
Manual pamaké
by EDA Technology Co., Ltd
built: 2025-08-01
1 Buku Panduan Hardware
Bab ieu ngawanohkeun produk leuwihview, daptar bungkusan, penampilan, tombol, indikator, sareng antarmuka.
1.1 Leuwihview
The ED-MONITOR-116C is an 11.6-inch industrial touch monitor featuring a screen resolution of 1920×1080, a high brightness of 450 cd/m², and a multi-touch capacitive touch screen. It includes one standard HDMI interface, one Type-C USB port, one DC Jack power interface, and one 3.5mm audio jack, making it compatible with various general-purpose PC hosts. The backlight and volume can be adjusted via buttons and software, and it is primarily used in industrial control applications.
- Antarbeungeut HDMI ngamungkinkeun sambungan langsung ka kaluaran HDMI tina host PC.
- Port USB Type-C ngirimkeun sinyal layar rampa.
- Jack audio 3.5mm ngarojong konektipitas headphone.
- Antarbeungeut kakuatan DC Jack ngadukung input 12V ~ 24V DC.
1.2 Daptar bungkusan
- 1 x ED-MONITOR-116C Monitor
- 1 x Mounting Kit (kaasup 4 x buckles, 4xM4 * 10 screws jeung 4xM4 * 16 screws)
1.3 Penampilan
Bagian ieu ngenalkeun pungsi sareng definisi antarmuka dina unggal panel.
1.3.1 Panel payun
Ngenalkeun jinis sareng definisi antarmuka dina panel hareup.
| NO. | Katerangan |
| 1 | 1 × layar LCD, layar rampa 11.6 inci kalawan resolusi 1920 × 1080, multi-rampa layar rampa kapasitif. |
1.3.2 Panel tukang
Ngenalkeun jinis sareng definisi antarmuka dina panel pungkur.
| NO. | Katerangan |
| 1 | 4 x liang instalasi tina snap, nu dipaké pikeun ngalereskeun snaps kana alat pikeun instalasi. |
| 2 | 4 x VESA liang ningkatna, ditangtayungan pikeun pamasangan bracket VESA. |
1.3.3 Panel Samping
Ngenalkeun jinis sareng definisi antarmuka dina panel samping.
| NO. | Katerangan |
| 1 | 1 x indikator kakuatan beureum, ngagunakeun pikeun view status kakuatan-on sareng mareuman alat. |
| 2 | 1 x input DC, konektor Jack DC, nu ngarojong input 12V ~ 24V DC. |
| 3 | 1 x 3.5mm jack kaluaran audio stereo, ngarojong konektipitas headphone. |
| 4 | 1 x input HDMI, konektor Tipe-A, anu nyambung ka kaluaran HDMI tina host PC. |
| 5 | 1 x port layar toél USB, konektor USB Type-C, anu nyambung ka port USB host PC pikeun ngirimkeun sinyal layar rampa. |
| 6 | liang dissipation panas, nu mantuan ngaronjatkeun kinerja cooling. |
| 7 | 1 x Karét colokan (pre-dibor 7mm diaméterna kabel routing liang), dirancang pikeun nampung kaperluan manajemén kabel tambahan. |
| 8 | 1 x “Brightness -” button, press the button to decrease the backlight brightness of the LCD screen. |
| 9 | 1 x tombol "Caangan +", pencét tombol pikeun ningkatkeun kacaangan lampu tukang layar LCD. |
| 10 | 1 x tombol "Volume -", pencét tombol pikeun ngurangan volume kaluaran. |
| 11 | 1 x tombol "Volume +", pencét tombol pikeun ningkatkeun volume kaluaran. |
| 12 | 1 x tombol "Jempé", pencét tombol pikeun ngajempékeun audio kaluaran. |
| 13 | liang dissipation panas, nu mantuan ngaronjatkeun kinerja cooling. |
Alat ED-MONITOR-116C kalebet dua tombol adjustment kacaangan lampu tukang sareng tilu tombol adjustment volume. Tombolna warna hideung sareng ditandaan ku labél anu dicitak layar 
, 
, 
, 
jeung 
dina perumahan.
| Tombol | Katerangan |
|
Pencét tombol pikeun ningkatkeun kacaangan lampu tukang layar LCD. |
|
Pencét tombol pikeun ngirangan kacaangan lampu tukang layar LCD. |
|
Press the button to increase the output volume. |
|
Press the button to decrease the output volume. |
|
Press the button to mute the output audio. |
1.5 Indikator
Alat ED-MONITOR-116C kalebet indikator kakuatan beureum, ditandaan ku labél anu dicitak layar "PWR" dina perumahan.
| Indikator | Status | Katerangan |
| PWR | On | Alat parantos diaktipkeun. |
| Kedip-kedip | Catu daya alatna henteu normal, punten ngeureunkeun catu daya langsung. | |
| Pareum | Alat teu hurung. |
1.6 Panganteur
Ngawanohkeun definisi jeung pungsi unggal panganteur dina ED-MONITOR-116C.
1.6.1 Panganteur kakuatan
Alat ED-MONITOR-116C kalebet 1 port input kakuatan sareng konektor DC Jack, dilabélan "24V DC" dina perumahan. Ieu ngarojong 12V ~ 24V DC input.
TIP
A adaptor kakuatan 12V 4A disarankeun.
1.6.2 panganteur HDMI
Alat ED-MONITOR-116C kalebet 1 antarmuka input HDMI sareng konektor Type-A, dilabélan "HDMI INPUT" dina perumahan, dianggo pikeun nyambungkeun kana kaluaran HDMI tina host PC.
1.6.3 Tipe-C USB Interface
Alat ED-MONITOR-116C ngawengku 1 panganteur USB Tipe-C, dilabélan "USB TOUCH" dina perumahan. Antarbeungeut ieu nyambung ka port USB tina host PC pikeun ngirimkeun sinyal layar rampa.
1.6.4 Panganteur Audio
Alat ED-MONITOR-116C kalebet 1 antarmuka audio (jack headphone 4-kutub 3.5mm), dilabélan "
” dina perumahan, ngadukung kaluaran audio stereo.
2 Masang alat
Alat ED-MONITOR-116C ngadukung pamasangan dipasang di hareup. Bungkusan standar kalebet kit Pemasangan dipasang (ED-ACCHMI-Front).
Persiapan:
- Kit ED-ACCHMI-Front Mounting parantos dicandak (kalebet 4 × M4 * 10 screws, 4 × M4 * 16 screws, sareng 4 snaps).
- A obeng cross geus disiapkeun.
Léngkah-léngkah:
1. Determine the cutout dimensions on the cabinet based on the ED-MONITOR-116C’s size, as shown in the figure below.
Unit: mm
2. Drill holes on the cabinet according to the aperture size defined in Step 1.
3. Embed the ED-MONITOR-116C into the cabinet from the exterior side.
4. Align liang screw (non-threaded) tina snaps jeung snap liang ningkatna di sisi alat.
5. Secure the snaps to the device.
- Use 4 × M4*10 screws to fasten the snaps to the device by threading them through the nonthreaded holes and tightening them clockwise.
- Lajeng, make 4 × M4 * 16 screws pikeun ngamankeun snaps kana kabinet: Selapkeun eta ngaliwatan liang threaded tina snaps, pencét ngalawan sisi interior kabinet, sarta thread aranjeunna jarum jam nepi ka pinuh tightened.
3 Ngagunakeun alat
ED-MONITOR-116C merlukeun host PC pikeun operasi sarta teu merlukeun instalasi supir. Sambungkeun ka kaluaran HDMI tina host PC heula, teras hurungkeun alat pikeun ngaktipkeun tampilan normal. Éta ngadukung lampu tukang sareng panyesuaian volume liwat tombol khusus sareng parangkat lunak.
3.1 Nyambungkeun Kabel
Bagian ieu ngajelaskeun kumaha nyambungkeun kabel.
Persiapan:
- A adaptor kakuatan fungsional geus kaala.
- A host PC fungsional geus kaala.
- Kabel HDMI sareng USB fungsional (Tipe-A ka kabel USB Tipe-C) parantos dicandak.
Diagram skéma tina sambungan kabel:
Mangga tingal 1.6 Panganteur to obtain the pin definitions and wiring methods of each interface.
TIP
The HDMI INPUT interface of the ED-MONITOR-116C is compatible with various PC hosts. The figure below illustrates cable connection using a Raspberry Pi as an example.
- Sasayogian tanaga
- Headphone
- Buah prambus Pi
3.2 Booting alat
ED-MONITOR-116C henteu kalebet saklar kakuatan fisik. Saatos nyambungkeun ka sumber listrik, alat bakal otomatis hurung. Sakali pinuh booted, éta bakal mintonkeun desktop tina host PC disambungkeun.
3.3 Nyaluyukeun kacaangan sareng Volume
ED-MONITOR-116C ngadukung kacaangan sareng adjustment volume liwat tombol fisik sareng parangkat lunak.
Sakali ED-MONITOR-116C beroperasi, kacaangan lampu tukang layar sareng polumeu tiasa disaluyukeun nganggo lima tombol khusus anu aya dina panel samping.
| Tombol | Katerangan |
|
Pencét tombol pikeun ningkatkeun kacaangan lampu tukang layar LCD. |
|
Pencét tombol pikeun ngirangan kacaangan lampu tukang layar LCD. |
|
Press the button to increase the output volume. |
|
Press the button to decrease the output volume. |
|
Press the button to mute the output audio. |
3.3.2 Saluyukeun Caang jeung Volume via Software
Sakali ED-MONITOR-116C disambungkeun ka host PC tur mintonkeun leres, lampu tukang layar tur volume kaluaran bisa disaluyukeun via software. Métode operasi béda-béda pikeun versi Desktop sareng Lite OS.
3.3.2.1 Raspberry Pi OS (Desktop)
Ngenalkeun kumaha carana nyaluyukeun kacaangan lampu tukang via UI dina Raspberry Pi OS (Desktop).
Persiapan:
- ED-MONITOR-116C dihubungkeun leres ka host Raspberry Pi kalayan kaluaran tampilan normal.
- Host Raspberry Pi gaduh konektipitas jaringan anu stabil.
Léngkah-léngkah:
1. Tambahkeun EDATEC apt Repository ku executing paréntah di handap sequentially dina terminal.
2. Pasang parangkat lunak parangkat lunak.
3. Pencét éta 
ikon di pojok desktop kénca luhur. Teras pilih "System Tools" → "EDATEC Monitor".
4. Saluyukeun kacaangan jeung polumeu ngagunakeun slaider dina panel "EDATEC Backlight".
TIP
Support executing the 
command in the terminal window to open the “EDATEC Backlight” panel.
3.3.2.2 Raspberry Pi OS (Lite)
Nyaluyukeun kacaangan sareng volume via CLI dina Raspberry Pi OS (Lite).
Persiapan:
- ED-MONITOR-116C dihubungkeun leres ka host Raspberry Pi kalayan kaluaran tampilan normal.
- Host Raspberry Pi gaduh konektipitas jaringan anu stabil.
Léngkah-léngkah:
1. Tambahkeun EDATEC apt Repository ku executing paréntah di handap sequentially dina terminal.
2. Pasang parangkat lunak parangkat lunak.
3. Laksanakeun paréntah di handap ieu pikeun naroskeun tingkat kacaangan ayeuna sareng setélan tingkat volume sacara misah.
- Parios tingkat kacaangan ayeuna:
- Parios tingkat volume ayeuna:
4. Execute the following commands to set brightness level and volume level as required.
- Setel tingkat kacaangan:
dimana 
represents the brightness level with a range of 0~100.
- Setel tingkat volume:
dimana 
represents the volume level with a range of 0~100.
Surélék: sales@edatec.cn / support@edatec.cn
Web: www.edatec.cn
Telepon: +86-15921483028(China) | +86-18217351262(Pancanagara)
Dokumén / Sumberdaya
 |
EDA Technology ED-MONITOR-116C Industrial Monitor and Display [pdf] Manual pamaké ED-MONITOR-116C Industrial Monitor and Display, ED-MONITOR-116C, Industrial Monitor and Display, Monitor and Display, Display |