QUARK-ELEC JS01, J1939 Engine Data gateway
Émbaran produk
spésifikasi
- Modél: JS01
- Tipe: J1939 Engine Data Gateway
- Konversi Protokol: J1939 ka NMEA 2000
- kasaluyuan: Alat Android
- Sumber Daya: jaringan NMEA 2000
Parentah Pamakéan Produk
Konfigurasi sareng Setup:
The JS01 is a plug-and-play device for connecting to an NMEA 2000 network. If you need to view engine data or configure multiple engines, you can use the JS01 Config App on an Android tablet or mobile device.
Ngaronjatkeun firmware:
To benefit from new features and enhanced compatibility, periodically check for firmware updates on the Quark-elec webpage. Use the JS01 Config App for easy firmware upgrades.
LEUWIHVIEW
Ieu hiji leuwihview ngan. Punten biasakeun diri sareng manual sareng manual tina alat anu nyambungkeun sateuacan dipasang. Sok disarankeun yén alat éléktronik dipasang ku pamasang anu berpengalaman.
INSTALASI
- Pamasangan: Consider the location…
- Dry, sturdy location.
- Pastikeun anjeun gaduh panjangna kabel anu diperyogikeun. Lamun pangeboran liang pikeun cabling Anjeun, segel sabudeureun sagala liang sanggeus instalasi pikeun nyegah asupna cai jeung karuksakan kana wadah atawa alat Anjeun.
- Sambungkeun Kakuatan
The JS01 is powered by the NMEA 2000 network. - NMEA 2000 is a plug-and-play communications standard, the JS01’s NMEA2000 input does not require additional setup before connecting it to an NMEA 2000 network. To protect the device, please don’t power up NMEA 2000 bus during the installation process.
- J1939: J1939 is a set of standards defined by the Society of Automotive Engineers (SAE). J1939 builds on the CAN bus by providing a higher-layer protocol that defines message formats, addressing, and error handling.
Different equipment may use various types of CAN bus connectors. The JS01 uses Deutsch DT04 -6P and DT06-6S connectors, which are known for their reliability and are widely used in marine inboard engines. These connectors were chosen to ensure secure, robust connections in demanding marine environments. If your engine uses a different connector type, an appropriate adapter will be required.
Panyambungna DT04-6P sareng DT06-6S mangrupikeun pin-to-pin disambungkeun. Desain ieu ngamungkinkeun JS01 ngahijikeun kana sistem beus CAN anu tos aya tanpa ngaganggu atanapi mangaruhan sambungan anu ayeuna.
Unit JS01 nyambungkeun ngaliwatan tilu kawat:- Pin 1: BISA Lemah
- pin 3: CAN High
- Pin 4: taneuh
Punten parios deui kabel anjeun pikeun mastikeun henteu aya sambungan anu salah. JS01 nyokot kakuatan tina beus NMEA 2000, jadi euweuh 12V perlu disambungkeun.
| DT04-6P | DT06-6S | |
| pin 1 | BISA RENDAH | BISA RENDAH |
| pin 2 | N/A | N/A |
| pin 3 | BISA TINGGI | BISA TINGGI |
| pin 4 | TANAH | TANAH |
| pin 5 | N/A | N/A |
| pin 6 | N/A | N/A |
lampu LED:
The LED status indicator will display a solid light when the device is powered on. It will flash to
CONVERSION LISTS
J1939 TO NMEA 2000 Daptar konvérsi
- The JS01 operates in a read-only mode on the J1939 interface, ensuring it does not interfere with existing engine control or status systems. It only reads data from the J1939 network and transmits it to the NMEA 2000 bus. This design guarantees there are no security or safety risks to the existing J1939 system.
- The following table lists the supported NMEA 2000 PGN’s and the related J1939 SPN/PGNs.
| Sumber:
J1939 SPN / PGN |
Katerangan | Converted:
NMEA2000 PGN |
| 92/61443(EEC2) | Beban Persen Mesin dina Laju Ayeuna | 127489 |
| 190/61444(EEC1) | Laju Mesin | 127488 |
| 513/61444(EEC1) | Saleresna Engine-Persen torsi | 127489 |
| 523/61445(ETC2) | Transmisi Gear Ayeuna | 127493 |
| 247/65253(JAM) | Mesin Total Jam Operasi | 127489 |
| 110/65262(ET1) | Suhu Mesin Coolant | 127489 |
| 175/65262(ET1) | Suhu Oli Mesin | 127489 |
| 109/65263(ET1) | Tekanan Mesin Coolant | 127489 |
| 100/65263(EFL_P1) | Tekanan Oli Mesin | 127489 |
| 94/65263(EFL_P1) | Tekanan Pangiriman Bahan Bakar Mesin | 127489/130314 |
| 183/65266(LFE) | Laju Suluh Mesin | 127489 |
| 184/65266(LFE) | Mesin Ékonomi Suluh Sakedapan | 127497 |
| 173/65270(IC1) | Mesin Hapus Gas Temp | 130316 |
| 102/65270(IC1) | Mesin Turbocharger naekeun Tekanan | 127488 |
| 115/65271(VEP1) | Alternator (Batre) Ayeuna | 127508 |
| 167/65271(VEP1) | Poténsial Alternator (Voltage) | 127489 |
| 168/65271(VEP1) | Poténsi Batré (Voltage) | 127508 |
| 127/65272(TRF1) | Tekanan Minyak Transmisi | 127493 |
| 177/65272(TRF1) | Suhu minyak transmisi | 127493 |
| 96/65276(DD) | Tingkat suluh | 127505 |
APLIKASI
- JS01 mangrupikeun alat plug-and-play anu henteu peryogi konfigurasi awal sateuacan nyambung ka jaringan NMEA 2000. Nanging, upami anjeun hoyong view data mesin atawa saluyukeun jumlah conto pikeun ngarojong sababaraha mesin, anjeun bakal kudu make JS01 Config App dina tablet Android atawa alat mobile. Alat konfigurasi ogé ngamungkinkeun anjeun pikeun nyaring kasalahan mesin sareng pesen peringatan anu dikirimkeun ka jaringan NMEA 2000.
- The latest App can be download from Quark-elec webkaca halaman: https://www.quark-elec.com/downloads/configuration-tools/
Ningkatkeun firmware
- Quark-elec périodik ngaleupaskeun apdet firmware pikeun ngawanohkeun fitur anyar jeung ningkatkeun kasaluyuan jeung rentang lega tina tipe mesin. JS01 Config App ogé bisa dipaké pikeun gampang ningkatkeun firmware alat. Firmware panganyarna tiasa diunduh tina Quark-elec webkaca: https://www.quark-elec.com/downloads/firmware/
- Full documentation on how to update the firmware can be found in the JS01 manual: https://www.quark-elec.com/doc/JS01_manual.pdf
Bantahan: Produk ieu dirarancang pikeun ngabantosan navigasi sareng kedah dianggo pikeun ningkatkeun prosedur sareng prakték navigasi normal. Tanggung jawab pangguna pikeun ngagunakeun produk ieu sacara bijaksana. Sanes Quark-elec, atanapi distributor atanapi dealer na henteu nampi tanggung jawab atanapi tanggung jawab ka pangguna produk atanapi hartana pikeun kacilakaan, karugian, tatu atanapi karusakan naon waé anu timbul tina panggunaan atanapi tanggung jawab pikeun ngagunakeun produk ieu.
Nyeken di dieu pikeun Manual Pamaké Alat ieu.
- Punten daur ulang bungkusan anjeun
- Sadaya produk anu CE, RoHS Certified
- Inpo leuwih lengkep di www.quark-elec.com
Patarosan anu sering ditaroskeun
Can the JS01 be used with multiple engines?
Yes, the JS01 supports multiple engines, and you can adjust the instance number using the JS01 Config App.
How can I update the firmware of the JS01?
Firmware updates can be easily done using the JS01 Config App. Check the Quark-elec webpage for the latest firmware download.
Is it necessary to connect a 12V power source to the JS01?
No, the JS01 draws power from the NMEA 2000 bus, so there is no need to connect a separate 12V power source.
Dokumén / Sumberdaya
 |
QUARK-ELEC JS01, J1939 Engine Data gateway [pdf] Pituduh pamaké JS01, JS01 J1939 Engine Data Gateway, JS01 J1939, Engine Data Gateway, Data Gateway, Gateway |