accucold DL2B Suhu Data Logger

Fitur

• Data logger sakaligus mintonkeun suhu minimum, maksimum sarta ayeuna
• Unit bakal nyadiakeun ngageter visual jeung audio lamun hawa naék luhur atawa ragrag handap titik set luhur jeung low.
• Fitur min/max dirancang pikeun ngawas sareng nyimpen bacaan anu pangluhurna sareng panghandapna dugi ka mémori dibersihkeun, atanapi ngaleupaskeun batré.
• Sénsor suhu ditutup dina botol anu dieusi glikol, ngajagi tina parobahan suhu anu gancang nalika panto kulkas/freezer dibuka.
• Pungsi waspada batré lemah (simbol batré kedip-kedip)
• Pamaké tiasa milih oC atanapi tampilan suhu
• Ukur rentang suhu -45 ~ 120 oC (atawa -49 ~ 248 oF)
• Kaayaan operasi: -10 ~ 60 oC (atawa -50 ~ 140 oF) jeung 20% ​​nepi ka 90% non-condensing (kalembaban relatif)
• Akurasi: ± 0.5 oC (-10 ~ 10 oC atawa 14 ~ 50 oF), dina rentang séjén ± 1 oC (atawa ± 2 oF)
• Interval logging anu didefinisikeun ku pangguna
• 6.5 ft (2 méter) kabel panyambung usik NTC
• Batré Li-ion anu tiasa dicas deui pikeun ngarékam data dugi ka 8 jam salami acara pareum listrik
• Powered by adaptor kakuatan 12VDC
• Cocog sareng USB 3.0 Extension Cable pikeun durability sarta mindahkeun data gampang
• Layar LCD cahayana LED ageung
• ukuran:137mm(L)×76mm(W)×40mm(D)
• Dimensi liang pamasangan: 71.5mm(W) x 133mm(L)

Eusi pakét

• logger data
• Sensor suhu (NTC) dina botol anu dieusi glikol
• Parentah manual
• Batré x2 AA anu tiasa dicas deui (1.5Volts)
• 4 GB Mémori iteuk [FAT 32]
• adaptor kakuatan
• Kantong antistatik
• sertipikat kalibrasi NIST-traceable

Masang logger Data

1. Pasang batré cadangan
   Buka tutup kompartemen batré anu aya di tukangeun unit sareng pasang batréna. Turutan polaritasna (+/-) diagram di handap ieu. Ganti panutup batré. Unit bakal bip sareng sadaya bagéan LCD bakal diaktipkeun.
2. Sambungkeun sénsor suhu sareng colokan adaptor kakuatan
   Ulah make gaya pikeun nyambungkeun usik atawa colokan adaptor kakuatan. Colokan adaptor kakuatan béda ti colokan usik.

Pikeun Paké
CATETAN: Sateuacan dianggo, piceun sareng piceun pilem pelindung plastik anu jelas tina layar (LCD).

• Teundeun sénsor suhu (dina botol glikol) dina lokasi anu bakal diawaskeun, sapertos di jero kulkas atanapi freezer. Pencatat data tiasa disimpen dina luhureun unit kalayan tampilan LCD anu gampang katingali sareng alarmna tiasa karungu. Data Logger nampilkeun suhu internal unit anu diawaskeun, ogé suhu maksimum sareng minimum anu dicapai. Pembacaan maksimum sareng minimum Data Logger ngagambarkeun suhu anu paling luhur sareng panghandapna ti saprak unit diaktipkeun atanapi ti saprak sajarah MIN/MAX diberesihan.
• Upami pangukuran suhu naék di luhur atanapi turun di handap kisaran suhu anu disetél, alarm bakal disada. Pikeun ngajempékeun alarm, pencét kenop naon waé.
• Hapus riwayat MIN/MAX saatos unit stabil.

Bagian jeung kadali / Fitur

LCD Paparan Pedaran

Kancing Pedaran

REC / STOP	Pencét REC/STOP pikeun STOP atawa RECORD data.
MAX/MIN	Pencét 3 detik pikeun mupus sajarah suhu MIN sareng MAX.
DL	Nyalin data anu dirékam (CSV file) kana USB
SET	Tahan tombol SET pikeun siklus ngaliwatan setélan konfigurasi.
	Tombol luhur/handap pikeun ngarobah setelan. Pencet jeung tahan salah sahiji kenop pikeun muka niléy gancang.

Setélan Logger Data Default

Kodeu	Fungsi	Rentang	Setélan standar
*Please enter the correct temperature units oF / oC
C1	Suhu luhur. alarem	C2    ~    100oC /212 oF	8.0 oC
C2	Suhu rendah. alarem	-45oC /-49 oF ~ C1	2.0 oC
C3	Histeresis alarem	0.1～20.0oC 0.2～36 oF	1.0 oC /2.0 oF
C4	Alarm reureuh	00 ～ 90 mnt	0 mnt
C5	Mimitian reureuh	00 ～ 90 mnt	0 mnt
CF	Unit Suhu	oC =Celsius oF =Fahrenheit	oC
E5	Suhu offset	-20～20oC -36～36 oF	0.0 oC/ oF
L1	Interval logging	00 ～ 240 mnt	05 mnt
PAS	Sandi	00 ~ 99	50

Programming Data Logger

Input Sandi

Tina layar tampilan utama: Hold the SET key for 3 seconds. Use the up and down arrows to adjust the password to the correct password. By default the correct password is 50. Pencét konci SET SAKALI pikeun mastikeun setélan.

Setélan Suhu Alarm Tinggi

By default, the high and low alarm settings are 8 oC jeung 2 oC respectively. To reset high alarm and low alarm temperature settings, follow instructions below. Tina layar tampilan utama: Hold the SET key for 3 seconds. Enter the correct password then press the SET key ONCE to enter the HI Temp Alarm setting mode. Use the up and down arrows to adjust the temperature accordingly.   Press SET key ONCE to confirm the settings.

Pemrograman Data Logger (Lanjutan)

Lemah Alarem                      Tina layar tampilan utama: Setélan Suhu  Hold the SET key for 3 seconds. Enter the correct password then press the SET key 2x pikeun ngasupkeun LO Temp Alarm setting mode. Use the up and down arrows to adjust the temperature accordingly. Press SET key ONCE to confirm the settings. Alarm Histeresis Hysteresis is the tolerance band to prevent alarm chattering. For instance, if the high alarm temperature is set at 8 oC with a hysteresis of 1 oC, once the alarm is activated, it will not return to normal until the temperature goes below 7 oC. By default, the alarm hysteresis is set at 1 oC. To reset, follow instructions below. Lamun hawa leuwih luhur ti (Setelan Suhu Alarm Low + Alarm Hysteresis) eta bakal kaluar alarem suhu low. When the temperature is lower than (High Alarm Temperature setting – Alarm Hysteresis), it will exit high temperature alarm. When an alarm condition occurs, HI-ALARM jeung LO-ALARM icons will appear on the display along with a beeping sound to alert user. The beeping sound will stay ON until the unit gets back in range. Press any key ONCE to stop the beeping sound. The high and low indicators will remain on display even when the unit gets back in range. Pencét for 3 seconds to clear the HI and LO alarm icons. *Catetan- The HI and LO alarm icons will only clear when the unit is back in range.* Tina layar tampilan utama: Hold the SET key for 3 seconds. Enter the correct password then press the SET key 3x pikeun ngasupkeun Alarm Histeresis setting mode. Use the up and down arrows to adjust the temperature accordingly.   Press SET key ONCE to confirm the settings.

Alarm reureuh Tunda alarm dianggo pikeun ngahindarkeun alarm anu teu dipikabutuh nalika hawa ngaleuwihan wates alarm luhur sareng handap anu disetel. Fitur ieu bakal ngalambatkeun aktivasina alarm ku jumlah waktos anu dilebetkeun. Sacara standar, reureuh alarm disetel dina 0 menit. Pikeun ngareset, turutan parentah di handap. Tina layar tampilan utama: Hold the SET key for 3 seconds. Enter the correct password then press the SET key 4x pikeun ngasupkeun Alarm reureuh setting mode. Use the up and down arrows to adjust the time accordingly. Press SET key ONCE to confirm the settings. Mimitian reureuh    Tina layar tampilan utama: Hold the SET key for 3 seconds. Enter the correct password then press the SET key 5x pikeun ngasupkeun Mimitian reureuh setting mode. Use the up and down arrows to adjust the time accordingly. Press SET key ONCE to confirm the settings. Suhu Unit            Tina layar tampilan utama: Hold the SET key for 3 seconds. Enter the correct password then press the SET key 6x pikeun ngasupkeun Unit suhu setting mode. Use the up and down arrows to adjust the temperature units accordingly. Press SET key ONCE to confirm the settings.

Pemrograman Data Logger (Lanjutan)
Suhu offset	The offset temperature feature is useful for customers who require a positive or negative temperature offset to be applied to the temperature sensor reading. By default, the offset temperature is preset to 0 oC. To change the setting, follow instructions below: Tina layar tampilan utama: Hold the SET key for 3 seconds. Enter the correct password then press the SET key 7x pikeun ngasupkeun Suhu offset setting mode. Use the up and down arrows to adjust the temperature accordingly.   Press SET key ONCE to confirm the settings.
Logging / Rékam Interval	This setting tells the logger how frequently to take and store readings. The unit has a logging interval of 10 s to 240 minutes. By default, the logging interval is preset to 5 minutes. To change the setting, follow instructions below: Tina layar tampilan utama: Hold the SET key for 3 seconds. Enter the correct password then press the SET key 8x pikeun ngasupkeun Interval Rékam setting mode. Use the up and down arrows to adjust the time accordingly.   Press SET key ONCE to confirm the settings.

Setélan Tanggal sareng Waktos
Pencét MIN/MAX jeung kenop SET sakaligus jeung tahan salila 3 detik pikeun asup ka modeu setelan tanggal jeung waktu. Paké panah luhur jeung ka handap pikeun nyaluyukeun taun sasuai. Pencét SET pikeun mastikeun sareng pindah ka modeu setelan bulan. Malikan deui léngkah anu sami pikeun nyetél BULAN/POÉ/Jam/MENIT & DETIK

Fungsi séjén

CLEAR the high and low alarm temperature indicators.	Pencét  salila 3 detik pikeun mupus alarm visual (Lo-Alarm jeung Hi-Alarm) indikator tina tampilan.
Pupus sadaya catetan sajarah data	Press REC/STOP and DL keys simultaneously for 3 seconds to delete all data history. DLT will display on the screen when the data is deleted successfully, and MEM capacity display will be empty.
Hapus sajarah suhu max sareng mnt	Press MIN/MAX key for 3 seconds to clear max and min temperature history. Jelas will display on the screen if the data is deleted successfully.
Nyalin data anu dirékam dina CSV ka USB	Lengkah kahiji: Insert the USB Flash Drive. USB will display on the screen when the logger detects the flash drive. Lengkah kadua: Press DL button for 3 seconds to download the data. CPL will display on the screen when the data is successfully transferred to the flash drive. Lengkah katilu: When CPL displays on the screen, the flash drive can be removed. Always clear the MEM/Data logger’s internal memory before taking new readings. Otherwise, it will take a long time to transfer large sets of data. *
Ngagunakeun USB 3.0 Extension Cable	Sambungkeun tungtung jalu kabel ka port USB teras sambungkeun flash drive ka tungtung bikang tina kabel.

Punten Catet:

• Nalika MEM pinuh, Unit overwrites data heubeul
• Lamun sensor hawa geus leupas atawa teu diselapkeun, "NP" bakal dipintonkeun sarta alarm NP bakal diaktipkeun.
• Nalika PAS 0 euweuh sandi. Pamaké bisa langsung ngasupkeun setelan parameter.
• Nalika interval logging (LI) = 0, interval catetan nyaéta 10 detik.
• To modify the factory settings: Press the SET key for 3 seconds to enter parameter setup state. After adjusting parameters, press SET key button again for 3 seconds. “COP” will be displayed. The modified and stored set temperature and parameters will be new default settings.
• Pikeun neruskeun setelan pabrik aslina, pencét DL jeung SET kenop sakaligus pikeun 3 detik, "888" bakal dipintonkeun nalika parameter direset ka setelan pabrik.
• To resume customer’s default settings, press ▲ and ▼ keys simultaneously for 3 seconds, “888” will display when the parameters are reset to customer’s default settings.

CSV File

• Pikeun ngundeur data, drive USB dikaluarkeun sacara aman sareng disambungkeun ka komputer. Buka file(s) dina Microsoft Excel atawa program .CSV cocog.
• Hasil data bakal dipidangkeun dina bentuk tabular sapertos anu dipidangkeun di handap ieu:-

titimangsa	Waktos	Temp	Hai Alarm	Lo Alarm	Hai Setélan Alarm	Lo Setélan Alarm
6/12/2018	16:33:27	24.9C	0	0	30.0C	-10.0C
6/12/2018	16:32:27	24.9C	0	0	30.0C	-10.0C
6/12/2018	16:31:27	24.9C	0	0	30.0C	-10.0C
6/12/2018	16:30:27	24.9C	0	0	30.0C	-10.0C
6/12/2018	16:29:27	24.9C	0	0	30.0C	-10.0C
6/12/2018	16:28:27	24.9C	0	0	30.0C	-10.0C
6/12/2018	16:27:19	24.9C	0	0	30.0C	-10.0C

titimangsa

Waktos(Jam 24 jam)

Suhu (oC)

Alarm Tinggi & Status suhu Alarm Rendah0 = No alarm event1= Alarm event

Alarm Lemah sareng Suhu Alarm Tinggi dina Derajat Celsius

Pamérésan masalah

Nembongkeun „NP‟	The temperature sensor is not installed correctly.
Layar tampilan teu jalan	Make sure the AC adapter and batteries are installed correctly.
Indikator "Batre lemah" kedip-kedip	Batré panginten kedah dicas deui.
Logger henteu logging	Pencét éta  konci sareng pastikeun simbol REC muncul dina tampilan. The logger will stop logging if AC power is removed and rechargeable battery is not connected or not charged.
Logger butuh lila teuing pikeun nyalin data ka flash drive	Mémori internal logger kedah diberesihan
The date sequence of the logged data is NOT accurate	Reset tanggal sareng waktos dina logger
Data anu dirékam rusak	Pastikeun unit teu dipasang di wewengkon kalawan gangguan éléktromagnétik kuat.
Logger henteu ngarékam data nalika kakuatan AC pareum	Dupi batré rechargeable diselapkeun leres? Punten perhatikeun kutub négatip sareng positip batré nalika ngagentos batré énggal. The rechargeable battery has not been charged prior to the power failure. The battery needs to be charged for a minimum of 2 days.

• Entong ngabongkar produk, sabab tiasa nyababkeun karusakan produk.
• Simpen produk di tempat anu henteu kakeunaan sinar panonpoé langsung, lebu atanapi kalembaban anu luhur.
• Ulah ngumbah atawa ngalaan produk ka cai atawa cairan séjén.
• Ngabersihan produk ku ngusap ku kaén anu lembut sareng garing.
• Ulah make cairan volatile atawa abrasive atawa cleaners pikeun ngabersihan produk.
• Ulah leupaskeun produk atawa tunduk kana shock dadakan atawa dampak.
• Kabel sénsor kedah dijauhkeun tina vol utamatage kawat guna nyingkahan noise frékuénsi luhur. Misahkeun catu daya tina beban tina catu daya Logger.
• Nalika masang sénsor, nempatkeun éta kalayan sirah ka luhur sareng kawat ka handap.
• Logger henteu kedah dipasang di daérah dimana aya tetesan cai.
• The logger must not be installed in an area where corrosive materials or a strong electromagnetic interference may be present.

Nanganan batré jeung pamakéan

PERHATOSAN
Pikeun ngurangan résiko tatu pribadi serius:

• Jauhkeun accu ti barudak. Ngan sawawa kedah nanganan batré.
• Turutan parentah kaamanan sareng pamakean produsén batré.
• Ulah ngalungkeun batré kana seuneu.
• Buang atanapi ngadaur ulang batré anu béak/discharged saluyu sareng sadaya hukum anu berlaku.

PERHATOSAN
Pikeun ngurangan résiko tatu pribadi:

• Salawasna nganggo ukuran sareng jinis batréna anu dituduhkeun.
• Selapkeun batré merhatikeun polaritasna ditangtoskeun (+/−) sakumaha dituduhkeun.

Rojongan Palanggan

• Pikeun rojongan teknis, mangga nelepon 800-932-4267 (AS sareng Kanada) atanapi email info@summitappliance.com
• For calibration services, please email calibration@summitappliance.com

Garansi kawates

ACCUCOLD products have a limited warranty period of 1 year against defects in materials and workmanship from the date of purchase. Accessory items and sensors have a limited warranty of 3 months. Repair services have a limited warranty period of 3 months against defects in materials and workmanship. ACCUCOLD shall, at its option either repair or replace hardware products that prove to be defective, if a notice to that effect is received within the warranty period. ACCUCOLD makes no other warranties or representations of any kind whatsoever, expressed or implied, except that of title, and all implied warranties including any warranty of merchantability and fitness for a particular purpose are hereby disclaimed.

• PERHATOSAN: Produk ieu tiasa ngalaan anjeun ka bahan kimia kalebet Nikel (Metallic) anu dipikanyaho ku Nagara California nyababkeun kanker.
  Kanggo inpo nu leuwih lengkep buka www.P65Warnings.ca.gov
• Catetan: Nikel mangrupakeun komponén dina sakabéh stainless steel sarta sababaraha komponén logam lianna.

FAQ

• Q: Sabaraha lami batréna?
  • A: The rechargeable Li-ion battery can record data for up to 8 hours during a power failure event.
• Q: Naon rentang suhu alat?
  • A: The device can measure temperatures ranging from -45 to 120 degrees Celsius or -49 to 248 degrees Fahrenheit.

Dokumén / Sumberdaya

accucold DL2B Suhu Data Logger [pdf] Buku Panduan Pamilik DL2B, DL2B Logger Data Suhu, Logger Data Suhu, Logger Data, Logger

Rujukan

• Manual pamaké