1. Bubuka
The ATTEN ST-862D is a high-performance 1000W hot air rework station designed for professional electronic repair and desoldering tasks, particularly for BGA components. It features a digital display for precise control, automatic sleep functionality, and a robust brushless fan for strong, consistent airflow. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting of your device.
2. Parentah Kasalametan
- Always operate the device in a well-ventilated area to avoid inhaling fumes.
- The hot air gun produces high temperatures. Avoid direct contact with the nozzle or heated components to prevent burns.
- Pastikeun catu daya cocog sareng voltase alattage requirements (110V or 220V).
- Ulah make alat deukeut bahan kaduruk atawa gas.
- Always place the hot air gun in its holder when not in use or during standby to activate the automatic cooling and sleep function.
- Cabut colokan alat tina stop kontak samemeh meresihan atawa ngalakukeun pangropéa nanaon.
- Jauhkeun tina jangkauan barudak.
3. Produk Langkungview
3.1. komponén
- Main Control Unit with Digital Display
- Panas Air Gun cecekelan
- Tempat Pistol Udara Panas
- Various Nozzles (straight air and spiral air)
- Nozzle Converter (for 850/858 series nozzles)
3.2. Fitur konci
- LCD display screen for clear visualization of working status.
- Temperature unit switching function (Celsius/Fahrenheit).
- Temperature locking and timed work function.
- MCU controlled temperature calibration and compensation for stable working.
- Strong air volume provided by a built-in brushless fan.
- Easy to replace pluggable heater.
- Convertible between straight air and spiral air nozzles.
- Automatic sleep function for energy saving and safety.
Figure 1: ATTEN ST-862D Hot Air Rework Station with included nozzles.
Figure 2: Different types of nozzles (straight and spiral air) for the ST-862D.
Figure 3: A2600 nozzle converter and additional nozzles suitable for 850 series.
4. Spésifikasi
Gambar 4: Parameter Produk.
Gambar 5: Spésifikasi Lengkep.
| Parameter | Nilai |
|---|---|
| Modél | ST-862D |
| Voltage | AC230V±10% 50Hz (110V±10% 60Hz Pilihan) |
| Kakuatan | 1000W (Maks) |
| Jenis sekering | T6.3A (230VAC) T10A (110V AC) |
| Rentang suhu | 100 ℃ ~ 480 ℃ / 212 ℉ ~ 896 ℉ |
| Akurasi suhu | ± 35 ℃ |
| Nyetel rentang volume hawa | 10%~99% |
| Unit suhu | ℃/℉ (default ℃) |
| Tiupan hawa | 120L/Min (Max) 30L/Min (Min) |
| Fungsi cooling pamanas sayaga | Ngarojong |
| Deteksi abnormal tina unsur pemanasan | Élmu panas ngaleupaskeun deteksi; deteksi sirkuit kabuka elemen pemanasan; elemen pemanasan deteksi overheating |
| deteksi abnormal tina sensor suhu | Sensor suhu deteksi sirkuit kabuka |
| Fungsi alarm bip | sadia |
| fungsi gancang | 3 set suhu potong kompas |
| Santunan suhu | ± 50 ℃ / ± 90 ℉ |
| tampilan status pemanasan | 5 bar simulate dinamis |
| adjustment hawa | 10 digit (Kasar)/1 digit (Fine-tuning) |
| adjustment aliran hawa | 2 digit (Kasar)/1 digit (Fine-tuning) |
| Shortcut temperature/air flow | 3 set suhu potong kompas / aliran hawa pikeun pilihan gancang |
| Kaayaan gawé | Temperature 0-40℃, relative humidity <80% |
| Kaayaan neundeun | Temperature -20-80℃, relative humidity <80% |
| Diménsi | 208(L)x175(W)x150(H)mm |
| Beurat | Ngeunaan 3340g |
5. Setélan
- Bongkar sadaya komponén sareng pastikeun sadayana masih utuh.
- Place the main control unit on a stable, heat-resistant surface.
- Connect the hot air gun handle to the main unit.
- Place the hot air gun in its designated holder.
- Connect the power cord to the main unit and then to a grounded power outlet matching the device's voltage (110V atawa 220V).
- Select the appropriate nozzle for your task and attach it securely to the hot air gun.
6. Parentah Operasi
Video 1: ATTEN ST-862D Hot Air Station demonstration, including operation and features.
6.1. Power On/Off and Handle Switch
- Press the power switch on the main unit to turn on the device.
- Handle Switch: A short press on the handle button will turn the hot air gun ON or OFF. A long press will change to cool air mode.
6.2. Adjusting Temperature and Airflow
- Use the 'AIR' up/down arrow buttons to adjust the airflow percentage (10% nepi ka 99%).
- Use the 'TEMP' up/down arrow buttons to adjust the temperature (100℃ ~ 480℃ / 212℉ ~ 896℉). Adjustments can be coarse (10 digits) or fine-tuned (1 digit).
6.3. Quick Setting Buttons (1, 2, 3)
- Buttons 1, 2, and 3 are memory settings for frequently used temperature and airflow combinations.
- Ngelingan: Short press button 1, 2, or 3 to load the stored settings.
- Pikeun nyimpen: Adjust the temperature and airflow to your desired values. Then, long press one of the buttons (1, 2, or 3) until the display confirms the value is stored.
6.4. Setélan Menu
- To Enter Menu: Long press buttons 1 and 3 simultaneously.
- To Navigate Menu: Press buttons 1 and 3 to cycle through menu items.
- To Exit and Save: Pencét tombol 2.
- Item Menu:
- LOC (Locking): Locks the current temperature and air flow settings to prevent accidental changes.
- Unit Suhu: Allows changing between Celsius (℃) and Fahrenheit (℉).
- FAC (Factory Reset): Mulangkeun alat ka setelan pabrik aslina.
- CAL (Temperature Compensation): Allows for temperature calibration (±50℃/±90℉) if needed, especially after replacing the handle or heating element.
- HTO (Timing Work): Sets a timed operation for the hot air gun (10S-900S).
6.5. Stand-by Function (Auto-Sleep)
- Mode 1 (STBY function is OFF): When the hot air gun is picked up, press the handle button to turn it ON or OFF. When placed back on the holder, the air gun automatically turns OFF.
- Mode 2 (STBY function is ON, time between 1-10 minutes): When the hot air gun is picked up, it automatically turns ON. If left on the holder for the set standby time, it will automatically turn OFF. To resume operation after standby, press the handle button again. The air gun automatically turns OFF when placed on the holder under working status.
6.6. Nozzle Changing
The ST-862D features an easy-to-change nozzle system. Simply pull off the current nozzle and push on the desired one. Ensure it is securely fitted before operation.
Figure 6: Easy nozzle changing process.
6.7. Aplikasi Example
The hot air rework station is ideal for desoldering and soldering various electronic components, including surface-mount devices (SMD) and BGA chips. Adjust the temperature and airflow according to the component and PCB requirements for optimal results.
Gambar 7: Kelample of desoldering a component using the hot air gun.
7. Pangropéa
- beberesih: Regularly clean the hot air gun nozzle and the main unit with a soft, dry cloth. Ensure the device is unplugged and cooled down before cleaning.
- Heater Replacement: The pluggable heater is designed for easy replacement. If the heater malfunctions, refer to the detailed instructions for safe replacement. It is recommended to perform temperature calibration (CAL) after replacing the heating element.
- Filter hawa: Check and clean the air filter periodically to ensure optimal airflow and prevent dust buildup.
8. Cara ngungkulan
- No heat or inconsistent temperature: Check the heating element for damage or loose connections. Perform temperature calibration (CAL) if necessary.
- Teu aya aliran hawa atanapi aliran hawa lemah: Check the brushless fan for obstructions or damage. Ensure the air filter is clean.
- Alat teu hurung: Verify the power cord is securely connected and the power outlet is functional. Check the fuse type (T6.3A for 230VAC, T10A for 110V AC) and replace if blown.
- Temperature unit display issue: Access the menu settings to switch between Celsius and Fahrenheit.
9. Tips pamaké
- The ST-862D is highly versatile and can be used for various applications including sleep repair, digital display adjustments, and automatic desoldering tasks.
- For users needing 110V operation, ensure you select the correct voltage option when purchasing or verify your unit's compatibility. The device is available in both 110V and 220V versions.
- Utilize the quick setting buttons (1, 2, 3) to save your most frequently used temperature and airflow settings for efficient workflow.
- If you notice any discrepancies in temperature, the temperature compensation (CAL) feature in the menu settings can be used to fine-tune the accuracy.
10. Garansi jeung Rojongan
The main unit of the ATTEN ST-862D comes with a two-year repair warranty and lifetime maintenance. Please note that the hot air gun handle is typically not covered under the warranty. For support or warranty claims, please contact your retailer or the manufacturer directly.
