Janome Artstyle 4057 Overlock Machine

1. Bubuka

The Janome Artstyle 4057 is a versatile 4/3 thread overlock machine designed to complement your sewing projects with professional finishes. This reliable machine features a fabric foot pressure regulator and a fabric supply differential, allowing it to handle a wide range of modern materials with ease. Its user-friendly design includes a color-coded threading diagram on the front panel to simplify the threading process.

2. Parentah Kasalametan penting

Please read all instructions before using this overlock machine. Keep this manual in a safe place for future reference.

• Always unplug the machine from the electrical outlet immediately after using and before cleaning, servicing, or making any adjustments.
• Ulah ngajalankeun mesin ku ari ruksak atawa colokan.
• Keep fingers away from all moving parts, especially the needle, loopers, and cutting knife.
• Use the correct type of needle for your fabric.
• Ulah leupaskeun atanapi nyelapkeun obyék naon waé kana bukaan naon waé.
• Ulah make di luar.
• Ulah beroperasi dimana produk aerosol (semprot) dipaké atawa dimana oksigén keur dikaluarkeun.
• Always use the proper power supply as indicated on the machine's rating plate.

3. Eusi Paket

Upon unpacking, ensure all items are present. The standard package for the Janome Artstyle 4057 typically includes:

• Janome Artstyle 4057 Overlock Machine
• Suku controller
• Standard accessories (e.g., tweezers, screwdrivers, spare needles, oiler, brush)
• Buku pituduh
• Panutup lebu

4. Produk Langkungview

Familiarize yourself with the main components of your Janome Artstyle 4057 overlock machine.

5. Parentah Setup

5.1 Panempatan awal sareng Sambungan Daya

1. Place the overlock machine on a stable, flat surface.
2. Ensure the power switch (located at the rear, see Figure 3) is in the 'OFF' position.
3. Sambungkeun kontroler suku kana mesin.
4. Colokkeun kabel listrik kana stop kontak listrik anu cocog.

5.2 Threading Mesin

The Janome Artstyle 4057 features a color-coded threading diagram on its front panel (visible when covers are open, Figure 4) to guide you. Follow the numerical and color sequence carefully for proper threading.

1. Angkat suku presser.
2. Lift the thread guides and open the front and side covers to access the loopers.
3. Follow the color-coded path for each thread, starting with the lower looper, then the upper looper, and finally the needles.
4. Use tweezers to guide threads through small openings and looper eyes.
5. Ensure all threads are seated correctly in the tension discs.
6. Tutup sadaya panutup kalayan pageuh.

5.3 Pamasangan jarum

1. Turn the handwheel towards you to raise the needles to their highest position.
2. Ngaleupaskeun jarum clamp screw(s) with a screwdriver.
3. Insert the new needle(s) with the flat side facing the back of the machine, pushing it up as far as it will go.
4. Kencangkeun jarum clamp screw(s) securely.

6. Parentah Operasi

The Janome Artstyle 4057 offers 8 kinds of seams, allowing for a variety of professional finishes.

6.1 Available Seam Types

• Fixed 4-Strand: Pikeun jahitan anu kuat sareng awét dina lawon anyaman sareng rajutan.
• Knitted Stretch: Ideal for highly elastic fabrics, providing flexibility without breaking stitches.
• Assembly 4-Strand: A strong seam for joining fabric pieces.
• 3-Thread Wide: A wide overlock stitch for general seaming and finishing.
• 3-Thread Narrow: A narrower overlock stitch, suitable for delicate fabrics or less bulky seams.
• 3-Thread Undercutting: For fine rolled hems or decorative edges.
• 3-Strand Roller: Creates a tight, decorative rolled hem.
• Flat Seam 3-Strand (Flatlock): A decorative flat seam, often used for activewear or joining two pieces of fabric with a flat finish.

6.2 Nyaluyukeun Setélan

The machine features several adjustable settings to optimize performance for different fabrics and desired stitch types:

• Cloth Foot Pressure Adjustment: Located on top of the machine, this dial allows you to increase or decrease the pressure on the fabric, crucial for handling very thick or very thin materials.
• Trimming Width Adjustment: Adjusts the distance between the needle and the cutting knife, with a maximum trimming width of up to 5mm. This controls how much fabric is trimmed off the edge.
• Pangaluyuan Panjang Jahitan: Controls the length of each stitch, up to 4mm. Use shorter stitches for finer fabrics or more durable seams, longer stitches for decorative effects or thicker materials.
• Rasio Feed diferensial: This feature, with a ratio range of 0.5-2.5, helps prevent stretching or puckering of fabrics. Adjust it to match the fabric's elasticity: use a higher ratio (above 1.0) for stretching knits to prevent wavy seams, and a lower ratio (below 1.0) for fine fabrics to prevent puckering.
• Cutting Off Knife: The machine is equipped with a cutting knife that trims the fabric edge before stitching. It can be engaged or disengaged as needed.

6.3 Ngamimitian ngaput

1. Hurungkeun switch kakuatan.
2. Teundeun lawon anjeun handapeun suku presser.
3. Turunkeun suku presser.
4. Gently press the foot controller to start sewing. The maximum sewing speed is 1300 stitches per minute.
5. Guide the fabric smoothly, allowing the machine to feed it.

7. Pangropéa

Regular maintenance ensures the longevity and optimal performance of your overlock machine.

7.1 beberesih

• Salawasna cabut colokan mesin saméméh beberesih.
• Open the front and side covers.
• Use the provided brush to remove lint and dust from the looper area, feed dogs, and knife area.
• Use a soft, dry cloth to wipe the exterior of the machine.
• Do not use liquid cleaners or harsh chemicals.

7.2 Minyakan

• Refer to your full manual for specific oiling points. Generally, a few drops of sewing machine oil should be applied to moving metal parts, especially the loopers and needle bar mechanism, after every 8-10 hours of use.
• Use only high-quality sewing machine oil.

7.3 Ngagantian jarum

Replace needles regularly (after 8-10 hours of sewing or when they become dull/bent) to prevent skipped stitches and fabric damage. Follow the instructions in Section 5.3.

8. Cara ngungkulan

Ieu sababaraha masalah umum sareng solusi poténsialna:

9. Spésifikasi

10. Tips pamaké

• Latihan dina Scraps: Before sewing on your main project, always test your stitch settings (tension, differential feed, stitch length) on a scrap piece of the same fabric.
• Kualitas Utas: Using good quality overlock thread can significantly reduce thread breakage and improve stitch quality.
• Needle Choice: Match your needle type and size to your fabric. Ballpoint needles are excellent for knits, while universal needles work well for wovens.
• Bersih sacara teratur: Lint buildup is common in overlockers. Regular cleaning, especially around the loopers and knives, prevents issues and extends machine life.

11. Garansi jeung Rojongan

The Janome Artstyle 4057 overlock machine typically comes with a garansi 2 taun. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or contact your authorized Janome dealer or service center.

Simpen resi pameseran anjeun salaku bukti pameseran pikeun tujuan garansi.