1. Bubuka
The Wainlux JL3 40W Laser Engraver is a versatile and powerful tool designed for DIY enthusiasts and professionals alike. It offers high-precision engraving and cutting capabilities on a wide range of materials, making it ideal for creating personalized products, gifts, and intricate designs. Featuring a 40W laser head with a 0.05mm compressed light spot, a 32-bit motherboard, and broad software compatibility, the JL3 provides an efficient and user-friendly experience.
2. Émbaran Kasalametan
Operating a laser engraver requires strict adherence to safety guidelines to prevent injury. Please read and understand all safety instructions before operating the device.
- Perlindungan panon: Always wear the provided protective goggles when the laser is active. The laser beam can cause permanent eye damage. The JL3 features a new eye protection design with panoramic filter coated glass, but additional protection is always recommended.
- Ventilasi: Ensure adequate ventilation in your workspace. Engraving and cutting materials can produce fumes and particles that may be harmful if inhaled.
- Bahan anu gampang kaduruk: Ulah ngukir atanapi motong bahan anu gampang kaduruk tanpa tindakan pencegahan anu leres. Salawasna awaskeun mesin nalika dioperasikeun.
- Barudak jeung Pets: Jauhkeun barudak jeung piaraan ti wewengkon operasi.
- Stopan Darurat: Familiarize yourself with the location and function of the On/Off switch to immediately terminate operation in an emergency.
- Sasayogian tanaga: Use only the provided power adapter and cable. Ensure the power supply is stable and correctly connected.
3. Eusi Paket
Before assembly, verify that all components listed below are present in your package:
- Y-sumbu kénca slide rail
- rel sumbu X
- kotak kontrol
- sirah laser
- User Manual (The instructions)
- Kacamata pelindung
- Adaptor
- kabel
- Kabel kakuatan
- Support beam (2x)
- Y-axis rel geser katuhu
- Accessories (various small parts)
- Tools (Toll)
- Ikatan kawat
- Screws
4. Setup jeung Majelis
The Wainlux JL3 is designed for easy installation, typically taking around 5 minutes. Follow these general steps for assembly:
- Majelis pigura: Connect the X-axis rail to the Y-axis slide rails and support beams using the provided screws and tools. Ensure all connections are secure for a solid structure.
- Pamasangan modul laser: Attach the laser module to the X-axis rail. The design allows for easy replacement and full viewing of the engraving process.
- Wiring: Connect the laser module and motors to the control box. Ensure all cables are properly routed and secured.
- Daya sareng Sambungan Data: Connect the power cable to the power port on the control box and plug it into an appropriate power outlet. Use the USB data interface to connect to a computer if needed.
5. Parentah Operasi
5.1 adjustment fokus
The JL3 features a sliding focus design with a fixed focus height of 5mm. To adjust the focus, place the material under the laser head and use the sliding mechanism to set the laser head to the appropriate 5mm height. Tighten the screws to fix the height.
5.2 Bahan kasaluyuan
The Wainlux JL3 can engrave and cut a wide variety of materials. The engraving area is 410x370mm.
- Ukiran: Wood, Leather, Lacquered metal, Plastic, Acrylic, Stainless steel, Grass, Ceramics, Card, Kraft paper.
- motong: Wood (up to 9mm thick), Bamboo, Card, Kraft paper, Acrylic (thin).
5.3 Engraving Modes
The JL3 offers four distinct engraving modes to suit different project requirements:
- Modeu Hideung Bodas: Picture default engraving mode.
- Discrete Mode: Ideal for engraving grayscale photos.
- Contour Mode: Used for contour engraving or cutting.
- Modeu Sketsa: For engraving grayscale photos with a sketch-like effect.
5.4 Software & Connectivity
The JL3 offers flexible connectivity and software options:
- Aplikasi Mobile: Use the self-developed free APP to connect via WiFi for editing photos and completing creations directly from your Android or iPhone.
- Parangkat Lunak PC: Connect to a Windows or Mac OS computer via a USB data cable. Compatible with popular laser engraving software like GRBL and LightBurn.
- Offline Working: The 32-bit motherboard supports offline engraving, allowing you to save files locally and operate without a continuous computer connection.
- Dirojong File Bentuk: BMP, PLT, DXF, JPEG, JPG, PNG, GCODE, SVG, NC.
5.5 Video Demonstrasi Produk
6. Pangropéa
Pangropéa rutin ngajamin umur panjang sareng kinerja optimal tina engraver laser anjeun.
- Ngabersihan Lensa Laser: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain engraving quality.
- Puing jelas: Remove any dust, debris, or material residue from the machine's rails and moving parts.
- Pariksa sambungan: Ensure all electrical and data connections are secure and free from damage.
- Lubricate Bagian Pindah: Apply a small amount of lubricant to the guide rails and lead screws as needed to ensure smooth movement.
- Kipas beberesih: Clean the powerful exhaust fan on the laser head to prevent overheating.
7. Cara ngungkulan
If you encounter issues with your Wainlux JL3, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Laser not firing or weak | Loose connection, dirty lens, incorrect power settings, laser module failure. | Check all connections. Clean the laser lens. Verify power settings in software. Contact support if module is faulty. |
| Kualitas ukiran/potongan anu goréng | Incorrect focus, wrong speed/power settings, material not suitable, dirty lens. | Adjust focus to 5mm. Optimize speed and power settings for the material. Ensure material is flat. Clean the laser lens. |
| Mesin teu nyambung ka komputer/aplikasi | USB cable issue, WiFi connection problem, driver not installed, software conflict. | Try a different USB cable/port. Reconnect to WiFi. Install necessary drivers. Restart software/device. |
| Noise normal nalika operasi | Loose parts, debris on rails, motor issue. | Inspect for loose screws. Clean rails and lubricate. Contact support if motor is faulty. |
8. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | WAINLUX |
| Nomer modél | JL3 |
| Daya laser | 40W (Compressed Light Laser Head) |
| Panjang gelombang laser | 450nm / 455nm |
| Laju ukiran | 10-80mm / s |
| Ukuran Spot Laser | 0.05mm (Ipis pisan) |
| Area Ukiran | 410 mm x 370 mm |
| Max. Ketebalan motong | 9mm (Wood board) |
| Motherboard | 32-bit (with Bluetooth 5.0 technology) |
| Konektipitas | WiFi, USB Data Interface, Offline Working |
| Sistem Operasi anu Dirojong | Windows, Mac OS, Android, iOS (via APP) |
| Software Dirojong | Self-developed APP, GRBL, LightBurn |
| Dirojong File Formulir | BMP, PLT, DXF, JPEG, JPG, PNG, GCODE, SVG, NC |
| Panjagaan panon | New Eye Protection Design with Panoramic Filter Coated Glass |
| Sertifikasi | CE |
| Umur Modul Laser | 20000H |
9. Tips pamaké
Based on user experiences and common questions, here are some tips to enhance your use of the Wainlux JL3:
- Uji Bahan: Always perform small test engravings on new materials or when using new settings to find the optimal power and speed.
- Software Learning Curve: While the machine is easy to assemble, mastering the engraving software (like LightBurn) may take some practice. Utilize online tutorials and communities for guidance.
- Rotary Attachment: If you plan to engrave cylindrical objects, consider using the optional rotary attachment for precise results.
- Modeu Offline: For repetitive tasks or when a computer connection is inconvenient, leverage the offline engraving feature by saving your designs directly to the machine.
- Kabersihan: Keep your workspace and the machine clean. Dust and debris can affect laser performance and machine longevity.
10. Garansi jeung Rojongan
The Wainlux JL3 Laser Engraver comes with a 1-year warranty, ensuring quality assurance. For any technical issues, operational questions, or support needs, please contact the official Wainlux customer service. They aim to provide quick responses within 12 hours.
