Buku Panduan Pangguna Earbud Nirkabel Mpow Flame Solo

Produk Leuwihview

The Mpow Flame Solo Wireless Earbuds are designed for active lifestyles, featuring IPX7 waterproofing, Environmental Noise Cancellation (ENC) for calls, and a secure ear hook design. This manual provides instructions for setup, operation, maintenance, and troubleshooting.

Eusi pakét

• 1 x Mpow Flame Solo Wireless Earbuds
• 1 x Kasus Ngecas
• 1 x Kabel Ngecas USB-C
• 3 Pair x Soft Eartips (XS/S/L, size M is preinstalled on earbuds)

Image: Mpow Flame Solo Earbuds and Charging Case

Parentah Setup

1. Ngecas Awal

• Before first use, remove the insulating film from the charging pins on both earbuds.
• Place the earbuds into the charging case and connect the USB-C charging cable to fully charge the device.
• Ensure the earbuds and charging case are fully charged before initial use for optimal battery performance.

Image: Charging case with earbuds and USB-C cable, illustrating fast charging capabilities.

2. Nyapasangkeun sareng Alat Anjeun

1. Take both headsets out of the charging case. The lights on both headsets will flash red and blue.
2. After 3-5 seconds, the red and blue lights on the right earbud will continue to flash, while the light on the left earbud will go out. This indicates that the two earbuds are successfully paired with each other.
3. On your phone or Bluetooth-enabled device, search for the Bluetooth name "Flame Solo".
4. Select "Flame Solo" to connect. Once connected, the lights on both earbuds will go out.

Image: Earbuds being taken out of charging case, ready for connection.

3. Ngagem Earbuds

The Mpow Flame Solo earbuds feature moldable ear hooks for a secure and comfortable fit, especially during strenuous activities. Adjust the ear hooks to fit snugly around your ears, then insert the earbuds into your ear canals and rotate them to a comfortable, stable position.

Image: Illustration of how to properly wear the ear hook earbuds for maximum comfort and stability.

Parentah Operasi

1. Tombol Kadali

The earbuds are equipped with multifunctional physical buttons for easy control of music playback and calls.

Image: Visual guide to the earbud button functions for calls and music playback.

• Answer/Reject/Hang up Calls: Use the designated button for call management.
• Puter/Reureuh Musik: Press the button to play or pause audio.
• Langkung Lacak: Use the buttons to navigate to the next or previous track.
• Saluyukeun Volume: Control the volume directly from the earbuds.
• Ngajempékeun/Nganonaktipkeun: Mute or unmute the microphone during calls.
• Aktipkeun Siri/Asisten Sora: Access your device's voice assistant.

2. Modeu mono

Both earbuds can be used independently in mono mode. This means either the left or right earbud can function as the primary earbud and connect directly to your device, allowing you to use one earbud while the other is charging or stored.

Pangropéa

1. Waterproofing

The Mpow Flame Solo earbuds feature an IPX7 waterproof rating and a sweat-proof nano-coating. This makes them suitable for sports and workouts, protecting against sweat, accidental splashes, and light rain. Do not submerge the earbuds in water for extended periods or expose them to high-pressure water jets.

Image: Earbuds submerged in water, demonstrating IPX7 waterproof capability.

2. beberesih

Regularly clean your earbuds and charging case to ensure optimal performance and hygiene. Use a soft, dry, lint-free cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure all components are completely dry before placing them back in the charging case or using them.

Pamérésan masalah

1. Earbuds Fail to Reconnect

If your earbuds fail to reconnect to your device, try the following reset procedure:

1. Turn off Bluetooth on your device (phone, tablet, etc.).
2. Candak duanana earbuds tina kotak ngeusi.
3. Simultaneously press and hold both the volume up and volume down buttons on boh earbud for 3 seconds. This should reset the earbuds.
4. Place the earbuds back in the case, then take them out again and attempt to pair them with your device as per the "Pairing with Your Device" instructions.

2. General Connectivity Issues

Ensure your device's Bluetooth is enabled and within range. The Mpow Flame Solo is compatible with all Bluetooth-enabled devices, including Android/iOS cellphones, tablets, computers, and TVs. If issues persist, try restarting both your device and the earbuds.

spésifikasi

Tip pamaké

• Kasus ngecas: The charging case for the Mpow Flame Solo earbuds does not support wireless charging; it charges via the provided USB-C cable.
• Sambungan Multi-Alat: While both earbuds can function independently as primary earbuds, the Mpow Flame Solo is designed to connect to one Bluetooth device at a time. Simultaneous connection to two different devices (e.g., phone and laptop) is not supported.
• Aman Fit: Candak advantage of the moldable ear hooks to achieve a secure and comfortable fit, especially during high-intensity activities. Experiment with the different eartip sizes to find the best seal for sound quality and stability.

Garansi & Rojongan

For warranty information, technical support, or any product-related inquiries, please contact the seller or MPOW customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.