DUKWIN R4891B Watch Winder Instruction Manual

Produk Leuwihview

The DUKWIN R4891B Watch Winder is an elegant and functional device designed to keep your automatic watches wound and ready to wear. It features a high-gloss piano finish, a quiet Mabuchi motor, and provides both winding and static storage for your valuable timepieces. This manual will guide you through the setup, operation, and maintenance of your watch winder.

spésifikasi

Eusi pakét

Mangga parios pakét kanggo barang-barang ieu:

• 1 x DUKWIN Watch Winder (with key lock)
• 1 x 110-240V AC Power Adapter (appropriate plug for your region: AU/EU/US/UK)
• 1 x Kain Beresih
• 1 x Manual Pamaké (dokumén ieu)
• 1 x konci
• 2 x PU Leather pillows (per winder case, to accommodate different watch sizes)

Disetél

1. Ngabongkar bungkusan

Carefully remove the watch winder and all accessories from the packaging. Inspect for any damage. Keep the packaging for future transport or storage.

2. Panempatan

Place the watch winder on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity. Ensure there is adequate space around the unit for ventilation.

3. Sambungan Daya

1. Locate the AC input port on the back of the winder.
2. Plug the provided AC power adapter into the AC input port.
3. Plug the other end of the adapter into a suitable wall outlet (110V-240V).

Parentah Operasi

1. Loading Watches

1. Open the lid of the watch winder using the provided key.
2. Gently place your automatic watches onto the PU leather pillows in the winding slots. Ensure the watch is securely fitted on the pillow. The winder includes two sizes of PU leather pillows to accommodate different watch sizes.
3. For static storage, place watches in the additional storage compartments.
4. Close and lock the lid for security and dust protection.

2. Setting Rotation Modes

The watch winder features a control switch knob on the back to select one of four rotation modes. Turn the knob to the desired mode:

• Modeu 0: OFF (Winder is inactive)
• Modeu 1: Rotates clockwise for 2 minutes, then rests for 6 minutes. (Cycle repeats)
• Modeu 2: Rotates counter-clockwise for 2 minutes, then rests for 6 minutes. (Cycle repeats)
• Modeu 3: Rotates counter-clockwise for 2 minutes, rests for 6 minutes, then rotates clockwise for 2 minutes, rests for 6 minutes. (Cycle repeats)
• Modeu 4: Rotates bi-directionally for 10 minutes, then rests for 180 minutes. (Cycle repeats until power off)

For all active winding modes, the rotator will turn at approximately 6.5-8.0 turns per minute.

Pangropéa

1. beberesih

To maintain the high-gloss finish and overall appearance of your watch winder:

• Ensure the winder is unplugged before cleaning.
• Use the provided clean cloth to gently wipe the exterior surfaces (MDF, Acrylic).
• Pikeun tanda nekad, rada dampen the cloth with water and wipe, then immediately dry with a clean, soft cloth.
• Ulah make cleaners abrasive, pangleyur, atawa bahan kimia kasar, sabab ieu bisa ngaruksak finish.
• Clean the PU leather interior with a soft, dry cloth.

2. Panyimpenan

When not in use for extended periods, unplug the winder and store it in its original packaging in a cool, dry place, away from direct sunlight and extreme temperatures.

3. Watch Pillow Adjustment

The winder includes two sizes of PU leather pillows per winding slot. If your watch is too loose or too tight on one pillow, try switching to the alternative pillow size to ensure a snug and secure fit without overstretching the watch band.

Pamérésan masalah

• Winder is not rotating:
  - Ensure the AC power adapter is securely plugged into both the winder and a working wall outlet.
  - Check that the control switch knob is not set to Mode 0 (OFF). Select an appropriate winding mode (Mode 1-4).
• Noise kaleuleuwihan:
  - The DUKWIN R4891B is equipped with a super quiet Mabuchi motor, designed to operate below 5dB. If you notice unusual or excessive noise, ensure the winder is on a stable, flat surface and that no objects are obstructing the rotation of the watch pillows.
  - If the noise persists, contact customer support.
• Watches are not winding:
  - Verify that the watches are automatic and not quartz. Watch winders are only for automatic mechanical watches.
  - Ensure the watches are correctly placed on the pillows and are not slipping.
  - Confirm the selected rotation mode is suitable for your watch's winding requirements. Some watches require specific rotation directions (clockwise, counter-clockwise, or bi-directional).

Tip pamaké

Automatic watches rely on motion to generate power. If an automatic watch is not worn for an extended period (typically 24-40 hours), its power reserve will deplete, and the watch will stop. This can be particularly inconvenient for watches with complex features like moon phases, which require tedious resetting.

A watch winder mimics the natural motions of your hand, keeping your automatic watches wound and accurate even when not being worn. This ensures your watches are always ready, prolongs their lifespan by keeping internal lubricants distributed, and saves you the hassle of repeatedly setting the time and date.

Garansi sareng Rojongan

Garansi

The motors and circuit boards of this watch winder are covered by a garansi 1 taun from the date of purchase. During this period, if any product breaks or is damaged under normal usage as per the instruction sheet, spare parts will be provided for replacement free of charge.

Rojongan Palanggan

For any problems or inquiries regarding your DUKWIN R4891B Watch Winder, please do not hesitate to contact our customer support team. We aim to respond within 24 hours.

• Telepon: +86-13500014957
• Surélék: Please refer to your purchase documentation or seller's contact information.

Catetan penting

• Due to variations in lighting and display factors, the actual color of the item may differ slightly from the images shown.
• Please allow for a 1-3cm measuring deviation due to manual measurement.