1. Bubuka
The Jonsbo TG-240 is an all-in-one (AIO) liquid CPU cooler designed to provide efficient cooling for a wide range of Intel and AMD processors. Featuring a 240mm radiator, addressable RGB (ARGB) lighting, and a rotatable pump head logo, it combines high performance with aesthetic customization. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your cooler.
2. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Modél | TG-240 ARGB (Black/White) |
| Jenis produk | Integrated Water Cooling (CPU All In One) |
| Ukuran Radiator | 277mm (L) x 120mm (W) x 27mm (H) |
| Ukuran Fan | 120mm x 120mm x 25mm |
| Volume Udara Kipas | 29.22-66.19 CFM (each) |
| Bantalan kipas | Hydraulic Hybrid Bearing |
| Laju kipas | 900-1800 RPM (±10%) |
| Fan Interface | 4-PIN PWM |
| Noise kipas | 22.9-35.4 dB(A) (max) |
| Ukuran Pompa | 74mm x 89.2mm x 51.8mm |
| Power Power | 3.6W |
| Pompa Noise | ＜30 dB(A) |
| Pompa Voltage | 12V DC |
| Pompa Speed | 2500 RPM (± 10%) |
| Pump Lift | 1.5M max |
| Aliran Pompa | ≥1300 ml / mnt |
| Bahan Plat Tiis | Copper (0.5mm thin copper bottom) |
| Bahan Radiator | Tambaga & Aluminium |
| Water Pipe Material | EPDM+IIR high-density |
| Rojongan RGB | A-RGB (5V-3pin) |
| Soket CPU anu Dirojong | Intel: LGA 1150, LGA 1155, LGA 1151, LGA1200, LGA 1156, LGA 1700, LGA 2011 AMD: AM4, Socket AM5 |
| Thermal Design Power (D-TDP) | 260W (Note: D-TDP is an open environment with a constant temperature of 20°C. Actual performance may vary.) |
| Sertifikasi | CE, RoHS |
Note: If the standard parameters of the product differ from the real object due to product upgrading or other reasons, please take the real object as the standard.
3. Eusi Paket
Mangga parios bungkusan pikeun mastikeun yén sadaya komponén aya:
- Jonsbo TG-240 Liquid Cooler (Radiator, Pump, and Fans pre-assembled)
- Mounting Brackets for Intel Sockets (LGA 115X/1200/1700/2011)
- Mounting Brackets for AMD Sockets (AM4/AM5)
- Pelat tukang (pikeun soket anu cocog)
- Pemasangan Screws sareng Standoffs
- Témpél termal
- Manual pangguna (dokumén ieu)
4. Setup jeung Instalasi
Before installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket and fan header locations.
4.1. Siapkeun CPU sareng Motherboard
- Install the appropriate backplate for your CPU socket (if required) on the rear of the motherboard.
- Secure the correct standoffs onto the motherboard's CPU socket mounting holes.
- Tempelkeun saeutik pasta termal kana tengah panyebar panas terpadu (IHS) CPU anjeun.
4.2. Pasang Radiator sareng Kipas
- Mount the radiator to an available fan mounting location in your PC case (e.g., top, front, or rear). Ensure proper airflow direction.
- Secure the fans to the radiator using the provided screws. The fans are designed with a simplified wiring system, connecting to the motherboard with a single cable for easier cable management.
4.3. Pasang Hulu Pompa
- Attach the correct mounting brackets for your CPU socket to the pump head.
- Carefully place the pump head onto the CPU, aligning the mounting holes with the standoffs.
- Secure the pump head with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.
- The pump head features a damping rotation nameplate, allowing you to adjust the Jonsbo logo direction after installation to match your preferred orientation.
4.4. Sambungkeun Kabel
- Connect the pump's 3-pin power cable to an available 3-pin or 4-pin fan header on your motherboard (usually labeled 'AIO_PUMP' or 'CPU_FAN').
- Connect the fan's 4-pin PWM cable to an available 4-pin fan header on your motherboard (e.g., 'CPU_FAN' or 'SYS_FAN').
- For ARGB lighting, connect the 5V-3pin ARGB cable from the pump and fans to a compatible 5V-3pin ARGB header on your motherboard. Ensure you connect to a 5V-3pin header, not a 12V-4pin RGB header, to prevent damage. The 5V ARGB plug features male and female headers, allowing for daisy-chaining with other ARGB devices.
5. Parentah Operasi
5.1. Power On and Initial Check
After completing the installation, power on your computer. Verify that the pump and fans are spinning, and the ARGB lighting is active. Check your motherboard's BIOS/UEFI or monitoring software to confirm the pump and fan speeds are detected.
5.2. Kontrol Lampu ARGB
The Jonsbo TG-240 supports 5V-3pin ARGB synchronization. To control the lighting effects, use your motherboard's dedicated ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync). This allows for customizable lighting effects across more than 16 million colors.
6. Pangropéa
Pangropéa rutin ngabantosan mastikeun umur panjang sareng kinerja optimal tina cooler cair anjeun.
- beberesih lebu: Périodik ngabersihan lebu tina sirip radiator sareng bilah kipas nganggo hawa anu dikomprés atanapi sikat lemes. Lebu kaleuleuwihan tiasa ngahalangan aliran hawa sareng ngirangan efisiensi pendinginan.
- Pariksa bocor: While the EPDM+IIR high-density water pipes are designed for durability and leak prevention, it's good practice to visually inspect the tubing and connections for any signs of leakage during routine system checks.
- Pamariksaan kipas: Ensure fans are spinning freely and quietly. If a fan becomes noisy or stops spinning, it may need replacement.
- Témpél termal: Reapplying thermal paste is generally not necessary unless you remove the pump head from the CPU. If you do, clean off old paste and apply new thermal paste before reinstallation.
7. Cara ngungkulan
If you encounter issues with your Jonsbo TG-240 cooler, try the following steps:
- No Power/No Spin:
- Check all power connections to the pump and fans. Ensure they are securely plugged into the correct motherboard headers.
- Verify that the fan headers are enabled in your motherboard's BIOS/UEFI settings.
- Teu aya Lampu ARGB:
- Ensure the 5V-3pin ARGB cable is correctly connected to a compatible 5V-3pin ARGB header on your motherboard. Do NOT connect to a 12V-4pin RGB header.
- Check your motherboard's ARGB software to ensure lighting effects are enabled and configured correctly.
- If daisy-chaining, ensure all connections are secure.
- Suhu CPU anu luhur:
- Verify that the pump is running (you might feel a slight vibration or hear a faint hum).
- Ensure fans are spinning at appropriate speeds. Check fan curves in BIOS/UEFI or software.
- Confirm the pump head is securely mounted to the CPU and thermal paste was applied correctly.
- Check for any obstructions to airflow through the radiator.
- Noise anu teu biasa:
- Identify if the noise is coming from the fans or the pump.
- Fan noise can sometimes be reduced by adjusting fan speeds in software.
- Pump noise (e.g., gurgling) can sometimes occur if air is trapped in the loop. Gently tilt your PC case in different directions while the system is running to help dislodge air bubbles.
8. Tips pamaké
- Manajemén Kabel: Candak advantage of the simplified fan wiring and the compact design to achieve a clean build. Plan your cable routes before securing components.
- Kustomisasi ARGB: Experiment with different lighting effects and colors using your motherboard's software to match your system's theme.
- Optimal Radiator Placement: For best cooling performance, consider mounting the radiator in a position that allows for fresh air intake or efficient exhaust, depending on your case's airflow design.
- Orientasi pompa: While the logo is rotatable, ensure the pump is mounted in a way that minimizes air trapping, typically with the tubes exiting from the bottom or side.
9. Garansi jeung Rojongan
Jonsbo products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official Jonsbo websitus atanapi ngahubungan pangecér lokal Anjeun. Simpen bukti pameseran anjeun pikeun klaim garansi.
