1. Bubuka
This manual provides instructions for the safe and efficient use of the N324 Dual Battery Charger. This charger is designed to charge batteries for various Trimble Total Stations, including the M3, DR2, DR3, DR5, Nivo 2M, and Nivo 2C models. Please read this manual thoroughly before operating the device.
2. Setélan
- Buka bungkus carjer: Carefully remove the N324 dual battery charger and its AC/DC adapter from the packaging.
- Pariksa Karusakan: Check the charger and adapter for any visible signs of damage. Do not use if damaged.
- Connect the AC/DC Adapter: Plug the DC output connector of the AC/DC adapter into the input port on the N324 charger.
- Nyambung ka Daya: Plug the AC input of the adapter into a standard wall outlet (100-240V ~ 50/60Hz).
3. Parentah Operasi
The N324 charger features two charging bays, allowing for simultaneous charging of two compatible batteries.
- Selapkeun Batré: Align the battery with the charging bay and gently slide it into place until it clicks securely. Ensure proper orientation.
- Monitor Status Ngecas: The charger will typically have indicator lights (not explicitly detailed in provided info, but common for chargers) to show charging status (e.g., red for charging, green for fully charged).
- Cabut Batré: Once charging is complete, carefully remove the batteries from the charging bays.
4. Pangropéa
- beberesih: Use a soft, dry cloth to clean the charger. Do not use liquid cleaners or solvents.
- Panyimpenan: Simpen carjer dina tempat anu tiis sareng garing upami henteu dianggo.
- Hindarkeun narik: Do not pull on the power cord to disconnect the charger. Always grasp the plug firmly.
5. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Charger teu hurung | No power from outlet; adapter not connected properly; faulty adapter/charger | Check wall outlet with another device; ensure adapter is securely connected; contact support if issue persists. |
| Batré teu ngecas | Battery not inserted correctly; incompatible battery; faulty battery | Re-insert battery, ensuring proper contact; verify battery compatibility; try another battery if available. |
6. Spésifikasi
N324 Dual Battery Charger
- model: N324
- Input: DC 9V, 4.0A
- Kaluaran: DC 4.2V, 2A per port
- Kasaluyuan: Trimble M3, DR2, DR3, DR5, Nivo 2M, Nivo 2C Total Stations (specifically batteries P/N: 67201-01-SPN / 8900084XXQ)
- Asal: Didamel di Cina
- Nomer Bagian: 67201-01-SPN
- Nomer séri: EGL-22039
Adaptor AC/DC
- model: 24-0503000-H
- Input: 100-240V ~ 50/60Hz 1.0A
- Kaluaran: 5.0V === 3.0A
- Asal: Didamel di Cina
Safety Information (from product label)
PERHATOSAN: Risk of fire, explosion or burns. Do not disassemble. Do not crush or modify. Do not heat above 60°C (140°F). Do not short circuit. Do not dispose of in fire or water. Use only rechargeable Lithium-ion batteries. Refer to the battery manufacturer's instructions for proper use.
7. Tips pamaké
- Always ensure the charger is placed on a stable, flat surface during operation to prevent accidental disconnections or damage.
- For optimal battery life, avoid completely draining batteries before recharging them.
- If charging only one battery, either bay can be used.
8. Garansi jeung Rojongan
For any questions, technical support, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
